Product List

Shipbuilding Steel Plate
Pressure Vessel Steel Plate
Low Alloy High Strength Steel
Boiler Steel Plate
Alloy Steel Plates
Weather resistant steel plate
Abrasion Resistant Steel Plate
Aluminium Plate
Shipbuilding Steel Profile
Carbon Steel Plate
Pipeline Steel Plate
A516GR70 HIC|NACE TM0284
Stainless Steel Plate

Contact Us

Tel: 0086-13598879167
Fax: 0086-371-88884766
Email: admin@gangsteel.com
Skype: gangsteel001@hotmail.com
Address: Gelin international Building,Zhengzhou city,Henan Province,China

A213/A213M Stainless Tube/Pipe

A213 TP321H Seamless stainless tube

A213 TP321HSeamless stainless tube, A213 TP321H Stainless pipe

 

ASTM A213 TP321HStandard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Stainless Tubes, Stainless Pipe
 

1. Gangsteel produced and exported A213 TP321H high quality Seamless stainless pipe or Seamless stainless tube with the range of outer diameter 3.2-200mm, Wall thickness 0.5-12.7mm

The main Steel Grade is ASTM A213 TP321H.

 

2. A213 TP321HStainless pipereferenced documents for production

   A 262 Practices for Detecting Susceptibility to Intergranular Intergranular Attack in Austenitic Stainless Steels
   A 941 Terminology Relating to Steel, Stainless Steel, Related

Alloys and Ferroalloys

A 1016/A 1016M Specification for General Requirements

for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless

Steel Tubes

E 112 Test Methods for Determining Average Grain Size

 

3. A213 TP321H Stainless Surface Condition
Ferritic alloy cold-finished steel tubes shall be free of scale and suitable for inspection. A slight amount of oxidation is not considered scale.

A213 TP321H Ferritic alloy hot-finished steel tubes shall be free of loose scale and suitable for inspection.

A213 TP321H Stainless steel tubes shall be pickled free of scale. A213 TP321H When bright annealing is used, pickling is not necessary Any special finish requirement shall be subject to agreement between the supplier and the purchaser.

 

4. A213 TP321HStainless pipeChemical Composition (Unit %)

 

 

Grade

A213 TP321H

UNS Grade

S32109

Carbon % Max

0.04-0.1

Manganese %

2.0

Phosphorus % Max

0.045

Sulfur % Max

0.030

Silicon % Max

1.00

Chromium %

17.00-19.00

Nickel %

9.0-12.0

Molybdenum %

Nitrogen  % Max

Niobium  %

Titanium %

4*(C+N)-0.7

Others Elements %

5. Mark of A213 TP321H Stainless pipeChemical elements

AMaximum, unless a range or minimum is indicated. Where ellipses (...) appear in this table, there is no minimum and analysis for the element need not be determined or reported.

BThe method of analysis for Nitrogen shall be a matter of agreement between the purchaser and the producer.

CFor these alloys, there is no common grade designation. The UNS number uniquely identifies these alloys.

DFor small diameter or thin walls, or both, where many drawing passes are required, a carbon maximum of 0.040% is necessary in Grades TP304L, TP304LN, TP316L, and TP316LN.

EGrade TP347LN shall have an Nb content of not less than 15 times the carbon content.

FGrade TP348 shall have an Nb + Ta content of not less than 10 times the carbon content and not more than 1.10%.

GGrade TP348H shall have an Nb + Ta content of not less than 8 times the carbon content and not more than 1.10%.

HGrade TP444 shall have Ni + Cu = 1.00 max.

IGrade TP444 shall have Ti + Nb = 0.20 + 4(C + N)–0.80.

 

6. A213 TP321H Tensile and A212 TP321HStainless pipeHardness Requirement

 

 

 

Stainless Pipe Grade

A213 TP321H

UNS Grade

S32109

Tensile Strength Mpa

515

Yield Strength Mpa

205

Elongation %

35

Hardness Brinell HBW max

192

Hardness Vickers HV max

200

Hardness Rockwell HRB max

90

 

7. A213 TP321H Stainless pipeHeat Treatment and Gain Size Requirement

 

 

Stainless Pipe Grade

A213 TP321H

UNS Number

S32109

Heat Treat Type

Solution Treatment

Solutioning Temperature

2000 hot worked

   1900 cold worked

Cooling Media

Water of rapid cool

 

 


 

8. A213 TP321HStainless pipe Delivery time
  Gangsteel Facotry produced them in 20days and we also had Stock list of 3000tons At TP321H, TP316, TP316L,TP309S, TP310 and others.
  We can provide the package of each pipe to promise delivery condition by sea.

 

9. A213 TP321H Stainless pipe Payment Item:

Delivery: 15 to 20 days according to your order quantity

Shipping: FCL,LCL,Buck ship

Loading Port: Shanghai,Tianjjin Port.

Packing: Wooden box,fixed with steel strip,then wrapped with woven bags

Payment terms: 30% T/T inadvance,70% balance after BL documents

 

Our advantage:

A. Annual production capacity:50,000 Mertic Ton

B. With at least 100 tons stock for general specification

C. Quote within 12 hours

D. 1 hours drive to nearest seaport

E. Delivery maximum 10 days for stock

 

 

10. A213 TP321H Stainless pipeAdopt Standard:

   ASTM A213, ASME SA213
   ASTM A312, ASME SA312
   ASTM A269
   ASTM A511

   ASTM A789

   ASTM A790

   EN10216-5
  

Our seamless stainless steel pipe and tube factory to export high quality A213 TP321HStainless Steel Pipes. If you have any requirement for A213 TP321H Or technical requirement about A213 TP321H seamless stainless tubes, please feel free to contact us.

Other Products