Wear Resistance Steel Plate

NM450,NM 450 STEEL PLATE

 

NM450 is an abrasion resistant plate with a hardness of 450 HBW, intended for applications where demands are imposed on abrasion resistance in combination with good cold bending properties. NM450 offers very good weldability.

Supplementary Technology:   Brinell hardness, HBW according to EN ISO 6506-1, on a milled surface 0,5–2 mm below plate surface per heat and 40 tons. Tests are made for every variation of 15 mm in the thickness of plates from the same heat.

 

Thickness: 3mm to130mm

Width: 1450mm to 4050mm,

Length: 3000mm to 15000mm
Gangsteel is specialized in supplying NM450 steel plate in 450.

For more information of NM450 steel plates, please check them in following:

 

NM450 Chemical Compositiom

Plate

C

Si

Mn

P

S

Cr

Ni

Mo

B

CEV

CET

thickness mm

max %

max %

max %

max %

max %

max %

max %

max %

max %

typv

typv

3-(8)

0.19

0.7

1.6

0.025

0.01

0.25

0.25

0.25

0.004

0.41

0.30

8-20

0.21

0.7

1.6

0.025

0.01

0.50

0.25

0.25

0.004

0.47

0.34

(20)-40

0.23

0.7

1.6

0.025

0.01

1.00

0.25

0.25

0.004

0.57

0.37

(40)-50

0.23

0.7

1.6

0.025

0.01

1.40

0.25

0.60

0.004

0.59

0.36

(50)-80

0.26

0.7

1.6

0.025

0.01

1.40

1.00

0.60

0.004

0.72

0.41

Plate thickness below 4 mm only after special agreement

CEV = C+Mn/6+(Cr+Mo+V)/5+(Cu+Ni)/15

CET = C + (Mn+Mo)/10+( Cr+ Cu)/20+ Ni/40

 

Shipbuilding steel plate | Alloy steel plates | High strength plate| Carbon steel plate | Stainless steel plate

 

 

If you need more stock steel plates in pressure vessel steel plate, please click warehouse sizes.

 

 

 

 

 

 

 

 

Other Products