Product List
Tel: 0086-13598879167
Fax: 0086-371-88884766
Email: admin@gangsteel.com
Skype: gangsteel001@hotmail.com
Address: Gelin international Building,Zhengzhou city,Henan Province,China
Aluminum plate 2219,Aluminum sheet 2219
The chemical composition and purpose of aluminum alloy 2219: 2219 is typical of hard aluminum alloy of aluminum-copper-magnesium. Its composition is reasonable, and it is better in comprehensive performance.
Many countries are the alloy producers. The Alloy 2219 is the biggest amount using forDural. 150 ° c. Temperature higher than 125 ° c, the strength of 2024 alloy is higher than that of 7075 alloy.
The characteristics of the alloy are: high strength, heat resistance, can be used as working parts below. It is better in formability in the condition of Thermal state, annealing and quenching conditions. The effect is remarkable in reinforcement of heattreatment, but it’s strict with heat treatment process.
It’s poor in resistance to corrosion, but with pure aluminum coating can be effectively protected. When welding, it is prone to crack. But it can welding, can also be riveted by special process.
Widely used in aircraft structure, rivets, truck wheel, screw elements, and other various structures.
|
Chemical Composition |
|||||||||
|
Grade |
The Element Max (%) |
||||||||
|
Si |
Fe |
Cu |
Mn |
Mg |
Cr |
Zn |
Ti |
Al |
|
|
Alloy 2219 |
0.20 |
0.30 |
5.8-6.8 |
0.20-0.40 |
0.02 |
|
0.10 |
0.02-0.10 |
remainder |
If any need in Alloy 2219 inquiry, please contact us by email.
|
Product Categories |
Used Alloy |
Thickness（mm） |
Width(mm) |
Length(mm) |
Heat Treatment |
|
Hot-Rolled Thick plate |
1060/1070/1100 |
8～200 |
≤1350 |
≤9000 |
H112 |
|
3003/3A21 |
8～200 |
≤1350 |
|||
|
6061/6A02 |
8～10 |
≤1250 |
|||
|
5052/5A02 |
8～10 |
≤1250 |
|||
|
10～200 |
≤1350 |
||||
|
5754 |
8～10 |
≤1200 |
|||
|
10～200 |
≤1350 |
||||
|
5083 |
8～10 |
≤1000 |
|||
|
10～15 |
≤1250 |
||||
|
15～200 |
≤1350 |
||||
|
5A05 |
15～200 |
≤1350 |
|
Product Categories |
Used Alloy |
Thickness（mm） |
Width(mm) |
Volume Weight(t) |
Coil Diameter(mm) |
Heat Treatment |
|
Hot-Rolled |
1060/1070/1100 |
7.0～16 |
900 |
4.5 |
505/605 |
F |
|
1040 |
5.0 |
|||||
|
1080 |
5.0 |
|||||
|
1240 |
6.0 |
|||||
|
1280 |
6.0 |
|||||
|
5052/5A02 |
8.0～10 |
900 |
4.0 |
|||
|
1040 |
5.0 |
|||||
|
1080 |
5.0 |
|||||
|
1240 |
5.5 |
|||||
|
1280 |
5.5 |
|||||
|
5754 |
8～10 |
900 |
4.0 |
|||
|
1040 |
4.5 |
|||||
|
1080 |
4.5 |
|||||
|
1240 |
5.0 |
|||||
|
1280 |
5.0 |
|
Product Categories |
Used Alloy |
Thickness（mm） |
Width(mm) |
Length(mm) |
Coil Weight(t) |
Heat Treatment |
|
Cold-Rolled |
1060/1070/1100 |
0.2～3.5 |
≤1340 |
≤6000 |
＜6(width：50mm～800mm，thickness：0.2～0.6mm) |
O, H12/22, H14/24, H16/26, H18, H32， H34， H36, H38 |
|
3003/3A21 |
≤1250 |
|||||
|
3004 |
≤1251 |
|||||
|
5005 |
≤1252 |
|||||
|
6061/6A02 |
≤1253 |
|||||
|
5052/5A02 |
≤1254 |
|||||
|
5754 |
≤1255 |
|||||
|
8011 |
≤1256 |
|
Aluminum wafer mold specifications（mm） |
||||||||
|
200 |
210 |
230 |
240 |
300 |
310 |
315 |
320 |
330 |
|
340 |
350 |
360 |
370 |
380 |
385 |
390 |
400 |
410 |
|
420 |
430 |
440 |
450 |
460 |
470 |
475 |
480 |
490 |
|
500 |
505 |
520 |
530 |
540 |
550 |
560 |
570 |
580 |
|
590 |
600 |
610 |
620 |
630 |
640 |
650 |
660 |
670 |
|
680 |
690 |
700 |
710 |
720 |
735 |
750 |
760 |
770 |
|
780 |
790 |
800 |
810 |
820 |
830 |
840 |
860 |
880 |
