15MnVB Steel Plate Applications & Ordering Guide
15MnVB (GB/T 3077 boron-treated Mn-V alloy structure steel) is specified for industrial fabrications where the drawing or material list names this grade. This applications page explains where the grade is used, what service conditions drive selection, and which certificate details belong on the purchase order. Gangsteel supplies 15MnVB (GB/T 3077 boron-treated Mn-V alloy structure steel) with EN 10204 mill test certificates.
Typical Applications and Service Conditions
15MnVB (GB/T 3077 boron-treated Mn-V alloy structure steel) plate is ordered for pressure equipment, process vessels, heat-exchanger related fabrications, structural members under the governing code, and project packages that call the grade by name. Match the mill test certificate grade mark to the calculation sheet; do not treat near-equivalents as automatic substitutes.
Service drivers include the design temperature and pressure of the governing code (ASME, EN/PED, class society, or project specification), weld procedure qualification needs, toughness or creep allowables where applicable, and inspection scope. Delivery condition Quench + low temper for listed QT properties; annealed supply hardness separately should be stated explicitly on the purchase order.
Industry Use Cases
Pressure equipment and process: shells, heads, and related platework when drawings name 15MnVB (GB/T 3077 boron-treated Mn-V alloy structure steel). Power and energy: boiler and heat-recovery fabrications under the ordered edition. Marine / offshore (when classed): only when the society material list names this exact grade stamp. Always keep heat-number traceability on cut pieces.
Chemical Composition - Supporting Data (15MnVB (GB/T 3077 boron-treated Mn-V alloy structure steel))
Heat analysis per GB/T 3077-2015 for 15MnVB. Confirm ordered edition on MTC.
| Element / rule | Requirement |
|---|
| C | 0.12-0.18 |
| Si | 0.17-0.37 |
| Mn | 1.20-1.60 |
| V | 0.07-0.12 |
| B | 0.0008-0.0035 |
| P, max | 0.030 |
| S, max | 0.030 |
Mechanical Properties - Supporting Data (15MnVB (GB/T 3077 boron-treated Mn-V alloy structure steel))
Confirm thickness, specimen orientation, and any supplementary impact, UT, or hardness requirements on the PO.
| Property | Requirement |
|---|
| Tensile Rm, min (15 mm QT specimen) | 885 MPa |
| Yield ReL/Rp0.2, min | 635 MPa |
| Elongation A, min | 10% |
| Reduction of area Z, min | 45% |
| Impact KV2, min | 55 J |
| Hardness annealed / high-temp tempered supply, max | 207 HBW |
| Typical QT cycle | Oil quench ~860 C + temper ~200 C (confirm PO) |
Related / Near-Equivalent Grades
Near-equivalents are for cross-reference only. They are not automatic code substitutes. Substitution requires engineer approval and matching certificate scope.
| System | Grade | Note |
|---|
| GB/T 3077 | 20MnVB / 40MnVB family | Related B-treated Mn-V grades |
Frequently Asked Questions
Where is 15MnVB (GB/T 3077 boron-treated Mn-V alloy structure steel) typically applied?
15MnVB (GB/T 3077 boron-treated Mn-V alloy structure steel) is applied where design documents, class material lists, or purchaser specs name this grade for pressure, process, structural, or marine fabrications as applicable. Match the MTC marking to the drawing.
What service conditions drive selection of 15MnVB (GB/T 3077 boron-treated Mn-V alloy structure steel)?
Design temperature and pressure, toughness or creep allowables, weldability, corrosion or process media, and the governing code edition drive selection. Delivery condition Quench + low temper for listed QT properties; annealed supply hardness separately must align with the ordered specification.
Can a near-equivalent replace 15MnVB (GB/T 3077 boron-treated Mn-V alloy structure steel) on an applications drawing?
Not without redesign and written approval. Near-equivalents differ in chemistry, heat treatment, impact temperature, or product form. Commercial swaps create non-conformance when the dossier names 15MnVB (GB/T 3077 boron-treated Mn-V alloy structure steel).
What fabrication notes matter for 15MnVB (GB/T 3077 boron-treated Mn-V alloy structure steel)?
Use approved WPS/PQR packages for the thickness and filler, control heat input, and preserve heat-number traceability on cut pieces. State any supplementary UT, PMI, or impact tests on the purchase order.
What certificate and marking should an applications PO demand?
EN 10204 3.1 is standard; 3.2 when a purchaser-appointed inspector witnesses tests. The MTC should show heat analysis, tensile results, delivery condition, and heat number aligned with 15MnVB (GB/T 3077 boron-treated Mn-V alloy structure steel).
How should I RFQ 15MnVB (GB/T 3077 boron-treated Mn-V alloy structure steel) plate from Gangsteel for a project?
Send 15MnVB (GB/T 3077 boron-treated Mn-V alloy structure steel), thickness x width x length (or nesting list), quantity, delivery condition, optional NDT/PMI, certificate type, destination, and any dual-mark needs. Note the end use when special flatness or cut-to-size packaging is required.
Ordering and Mill Certificates
State grade 15MnVB (GB/T 3077 boron-treated Mn-V alloy structure steel), dimensions, quantity, delivery condition, optional NDT/PMI, and certificate (EN 10204 3.1 standard; 3.2 when third-party inspection is ordered). Gangsteel supplies export plate and related products with mill test certificates. Contact Gangsteel for stock and mill production RFQs.
