20MnMoNi55 Steel Plate Specifications

20MnMoNi55 / 20MnMoNi5-5 (DIN 1.6310; SEW pressure-vessel QT steel) is a Mn-Mo-Ni quenched-and-tempered pressure-vessel plate grade under DIN 20MnMoNi5-5 / SEW 20MnMoNi55; material no. 1.6310. This specification page covers grade identity, chemistry, mechanical requirements, related grades, and RFQ practice. Accept material against the ordered edition and the mill test certificate.

Grade Identity and Delivery Condition

20MnMoNi55 / 20MnMoNi5-5 (DIN 1.6310; SEW pressure-vessel QT steel) is supplied for projects that name this designation on the purchase order or calculation sheet. Standard delivery condition is Quenched and tempered (austenitize ~870-930 C, temper ~630-690 C typical). Gangsteel supplies export plate and related products with EN 10204 documentation. Do not accept an alternate heat-treatment route unless a written concession changes the specification requirement.

Chemical Composition - Heat Analysis (20MnMoNi55 / 20MnMoNi5-5 (DIN 1.6310; SEW pressure-vessel QT steel))

Heat analysis for DIN 20MnMoNi5-5 / SEW 20MnMoNi55. Wuyang WYJ036 mill route may use slightly different C/Mn bands - prefer the ordered tech condition on the MTC.

Element / ruleRequirement
C0.17-0.23
Si0.15-0.30
Mn1.20-1.50
Ni0.50-0.80
Mo0.40-0.55
Al0.010-0.040
V, max0.03
Cr, max0.20
Cu, max0.12-0.18 (edition-dependent)
P, max0.025
S, max0.010

Mechanical Properties (20MnMoNi55 / 20MnMoNi5-5 (DIN 1.6310; SEW pressure-vessel QT steel))

Confirm thickness, specimen orientation, and any supplementary impact, UT, or hardness requirements on the PO.

PropertyRequirement
Tensile Rm560-730 MPa
Yield Rp0.2, min390 MPa
Elongation A, min16%
Delivery / HTQ+T; stress-relief often 580-620 C

Related / Near-Equivalent Grades

Near-equivalents are for cross-reference only. They are not automatic code substitutes. Substitution requires engineer approval and matching certificate scope.

SystemGradeNote
ASTM/ASMEA508 Gr.3 Cl.1 / SA-508 Class 3Implicit near-equivalent - confirm
ASTMA533 Type B Class 1 familyMn-Mo-Ni PV family
DIN1.6310Material number

Frequently Asked Questions

What is 20MnMoNi55 / 20MnMoNi5-5 (DIN 1.6310; SEW pressure-vessel QT steel)?

20MnMoNi55 / 20MnMoNi5-5 (DIN 1.6310; SEW pressure-vessel QT steel) is a Mn-Mo-Ni quenched-and-tempered pressure-vessel plate under DIN 20MnMoNi5-5 / SEW 20MnMoNi55; material no. 1.6310. It is ordered when drawings or the calculation sheet name this designation specifically.

What chemical composition applies to 20MnMoNi55 / 20MnMoNi5-5 (DIN 1.6310; SEW pressure-vessel QT steel)?

Controlled elements and limits are tabulated above from the governing standard. Always verify the heat analysis on the MTC against the ordered edition.

What mechanical properties should buyers expect for 20MnMoNi55 / 20MnMoNi5-5 (DIN 1.6310; SEW pressure-vessel QT steel)?

Tensile, yield, elongation, and related limits are tabulated above. Design allowables must come from the applicable pressure-vessel or structural code, not from a web summary.

What delivery condition is required for 20MnMoNi55 / 20MnMoNi5-5 (DIN 1.6310; SEW pressure-vessel QT steel)?

Standard delivery is Quenched and tempered (austenitize ~870-930 C, temper ~630-690 C typical). State it explicitly on the PO. Do not accept an alternate route without a written concession.

How does 20MnMoNi55 / 20MnMoNi5-5 (DIN 1.6310; SEW pressure-vessel QT steel) differ from near-equivalent grades?

Near-equivalents may differ in carbon or alloy bands, tensile class, impact temperature, or heat treatment. Substitution needs engineering approval and matching certificate scope.

How do I RFQ 20MnMoNi55 / 20MnMoNi5-5 (DIN 1.6310; SEW pressure-vessel QT steel) from Gangsteel?

Send 20MnMoNi55 / 20MnMoNi5-5 (DIN 1.6310; SEW pressure-vessel QT steel), thickness x width x length, quantity or tonnage, delivery condition, optional impact/UT/Z tests, EN 10204 3.1 or 3.2, destination, and any dual-mark needs. Gangsteel replies with mill options, lead time, and packing notes.

Ordering and Mill Certificates

State grade 20MnMoNi55 / 20MnMoNi5-5 (DIN 1.6310; SEW pressure-vessel QT steel), dimensions, quantity, delivery condition, optional NDT/PMI, and certificate (EN 10204 3.1 standard; 3.2 when third-party inspection is ordered). Gangsteel supplies export plate and related products with mill test certificates. Contact Gangsteel for stock and mill production RFQs.

Main Products