30CrMnSiA Steel Plate Specifications
30CrMnSiA (GB/T 3077 alloy structure steel) is a Cr-Mn-Si alloy structural steel (quenched and tempered; plate/bar/forging forms) grade under GB/T 3077-1999 Alloy structure steels (ISC A24303). This specification page covers grade identity, chemistry, mechanical requirements, related grades, and RFQ practice. Accept material against the ordered edition and the mill test certificate.
Grade Identity and Delivery Condition
30CrMnSiA (GB/T 3077 alloy structure steel) is supplied for projects that name this designation on the purchase order or calculation sheet. Standard delivery condition is Quenched and tempered for listed mechanicals; annealed/high-temp tempered supply hardness applies separately. Gangsteel supplies export plate and related products with EN 10204 documentation. Do not accept an alternate heat-treatment route unless a written concession changes the specification requirement.
Chemical Composition - Heat Analysis (30CrMnSiA (GB/T 3077 alloy structure steel))
Heat analysis per GB/T 3077-1999 for 30CrMnSiA. Residual Ni/Cu/Mo limits as tabulated for quality A grades.
| Element / rule | Requirement |
|---|
| C | 0.28-0.34 |
| Si | 0.90-1.20 |
| Mn | 0.80-1.10 |
| Cr | 0.80-1.10 |
| P, max | 0.025 |
| S, max | 0.025 |
| Ni, max (residual) | 0.30 |
| Cu, max (residual) | 0.25 |
| Mo, max (residual) | 0.10 |
Mechanical Properties (30CrMnSiA (GB/T 3077 alloy structure steel))
Confirm thickness, specimen orientation, and any supplementary impact, UT, or hardness requirements on the PO.
| Property | Requirement |
|---|
| Tensile Rm, min (d=25 mm QT specimen) | 1080 MPa |
| Yield ReL/Rp0.2, min | 835 MPa |
| Elongation A, min | 10% |
| Reduction of area Z, min | 45% |
| Impact KV2, min | 39 J |
| Hardness annealed / high-temp tempered supply, max | 229 HBW |
| Typical QT cycle | Oil quench ~880 C + temper ~520 C (confirm PO) |
Related / Near-Equivalent Grades
Near-equivalents are for cross-reference only. They are not automatic code substitutes. Substitution requires engineer approval and matching certificate scope.
| System | Grade | Note |
|---|
| GB/T 3077 | 30CrMnSi | Non-A sister; slightly wider residuals |
| Near | 25CrMnSiA / 35CrMnSiA | Same family different C |
Frequently Asked Questions
What is 30CrMnSiA (GB/T 3077 alloy structure steel)?
30CrMnSiA (GB/T 3077 alloy structure steel) is a Cr-Mn-Si alloy structural steel (quenched and tempered; plate/bar/forging forms) under GB/T 3077-1999 Alloy structure steels (ISC A24303). It is ordered when drawings or the calculation sheet name this designation specifically.
What chemical composition applies to 30CrMnSiA (GB/T 3077 alloy structure steel)?
Controlled elements and limits are tabulated above from the governing standard. Always verify the heat analysis on the MTC against the ordered edition.
What mechanical properties should buyers expect for 30CrMnSiA (GB/T 3077 alloy structure steel)?
Tensile, yield, elongation, and related limits are tabulated above. Design allowables must come from the applicable pressure-vessel or structural code, not from a web summary.
What delivery condition is required for 30CrMnSiA (GB/T 3077 alloy structure steel)?
Standard delivery is Quenched and tempered for listed mechanicals; annealed/high-temp tempered supply hardness applies separately. State it explicitly on the PO. Do not accept an alternate route without a written concession.
How does 30CrMnSiA (GB/T 3077 alloy structure steel) differ from near-equivalent grades?
Near-equivalents may differ in carbon or alloy bands, tensile class, impact temperature, or heat treatment. Substitution needs engineering approval and matching certificate scope.
How do I RFQ 30CrMnSiA (GB/T 3077 alloy structure steel) from Gangsteel?
Send 30CrMnSiA (GB/T 3077 alloy structure steel), thickness x width x length, quantity or tonnage, delivery condition, optional impact/UT/Z tests, EN 10204 3.1 or 3.2, destination, and any dual-mark needs. Gangsteel replies with mill options, lead time, and packing notes.
Ordering and Mill Certificates
State grade 30CrMnSiA (GB/T 3077 alloy structure steel), dimensions, quantity, delivery condition, optional NDT/PMI, and certificate (EN 10204 3.1 standard; 3.2 when third-party inspection is ordered). Gangsteel supplies export plate and related products with mill test certificates. Contact Gangsteel for stock and mill production RFQs.