AISI4140 Steel Plate Specifications
AISI/SAE 4140 (UNS G41400; ASTM A29 / A829 plate practice) is a Cr-Mo alloy steel plate/bar (machinery, shafts, mould bases) grade under AISI 4140; ASTM A29 (bar chemistry basis); ASTM A829 Grade 4140 plate. This specification page covers grade identity, chemistry, mechanical requirements, related grades, and RFQ practice. Accept material against the ordered edition and the mill test certificate.
Grade Identity and Delivery Condition
AISI/SAE 4140 is supplied for projects that name this designation on the purchase order or calculation sheet. Standard delivery condition is Annealed, normalized, or quenched and tempered per order; A829 lists hardness by condition. Gangsteel supplies export plate and related products with EN 10204 documentation. Do not accept an alternate heat-treatment route unless a written concession changes the specification requirement.
Chemical Composition - Heat Analysis (AISI/SAE 4140)
Standard AISI 4140 heat analysis. Plate orders often cite ASTM A829 Grade 4140 - confirm condition (annealed/normalized/QT) on the PO.
| Element / rule | Requirement |
|---|
| C | 0.38-0.43 |
| Mn | 0.75-1.00 |
| Si | 0.15-0.35 |
| Cr | 0.80-1.10 |
| Mo | 0.15-0.25 |
| P, max | 0.035 |
| S, max | 0.040 |
Mechanical Properties (AISI/SAE 4140)
Confirm thickness, specimen orientation, and any supplementary impact, UT, or hardness requirements on the PO.
| Property | Requirement |
|---|
| Annealed tensile (typical handbook) | ~655 MPa |
| Annealed yield (typical handbook) | ~415 MPa |
| Annealed elongation (typical) | ~25% |
| A829 annealed hardness, max | 240 HBW |
| A829 normalized hardness, max (t<=38 mm) | 320 HBW |
| Note | Final QT properties are temper-dependent - use MTC values for design |
Related / Near-Equivalent Grades
Near-equivalents are for cross-reference only. They are not automatic code substitutes. Substitution requires engineer approval and matching certificate scope.
| System | Grade | Note |
|---|
| DIN | 42CrMo4 / 1.7225 | Near European twin |
| JIS | SCM440 | Near Japanese twin |
| GB | 42CrMo | Near Chinese twin |
Frequently Asked Questions
What is AISI/SAE 4140?
AISI/SAE 4140 (UNS G41400; ASTM A29 / A829 plate practice) is a Cr-Mo alloy steel plate/bar (machinery, shafts, mould bases) under AISI 4140; ASTM A29 (bar chemistry basis); ASTM A829 Grade 4140 plate. It is ordered when drawings or the calculation sheet name this designation specifically.
What chemical composition applies to AISI/SAE 4140?
Controlled elements and limits are tabulated above from the governing standard. Always verify the heat analysis on the MTC against the ordered edition.
What mechanical properties should buyers expect for AISI/SAE 4140?
Tensile, yield, elongation, and related limits are tabulated above. Design allowables must come from the applicable pressure-vessel or structural code, not from a web summary.
What delivery condition is required for AISI/SAE 4140?
Standard delivery is Annealed, normalized, or quenched and tempered per order; A829 lists hardness by condition. State it explicitly on the PO. Do not accept an alternate route without a written concession.
How does AISI/SAE 4140 differ from near-equivalent grades?
Near-equivalents may differ in carbon or alloy bands, tensile class, impact temperature, or heat treatment. Substitution needs engineering approval and matching certificate scope.
How do I RFQ AISI/SAE 4140 from Gangsteel?
Send AISI/SAE 4140 (UNS G41400; ASTM A29 / A829 plate practice), thickness x width x length, quantity or tonnage, delivery condition, optional impact/UT/Z tests, EN 10204 3.1 or 3.2, destination, and any dual-mark needs. Gangsteel replies with mill options, lead time, and packing notes.
Ordering and Mill Certificates
State grade AISI/SAE 4140 (UNS G41400; ASTM A29 / A829 plate practice), dimensions, quantity, delivery condition, optional NDT/PMI, and certificate (EN 10204 3.1 standard; 3.2 when third-party inspection is ordered). Gangsteel supplies export plate and related products with mill test certificates. Contact Gangsteel for stock and mill production RFQs.