Aluminum plate 5A02,Aluminum sheet 5A02

 

Characteristics and scope of application:

For Al-Mg series anti-rust aluminum, the strength of 5A02 is higher than 3A21 , especially has high fatigue strength. Similar to 3A21,5A02 has high plasticity and corrosion resistance.5A02 cannot improved strength by heat treatment. It is better in Atomic hydrogen weldingand contact welding, argon arc welding with crystallization crack tendency. Alloy has good machinability in cold work hardening and half cold work hardening condition, and not good machinability in annealing state, can be polished.

 

Chemical Composition

Grade

The Element Max (%)

Si

Fe

Cu

Mn

Mg

Cr

Zi

Ti

Al

Alloy 5A02

0.40

0.00-0.40

0.10

0.15-0.40

2.0-2.8

0.15-0.40

 

0.15

余量

 

Mechanical properties

Low mechanical properties:

Tensile strength σ(MPa) : ≤225

Elongation delta δ(%) : ≥10

Note: rod longitudinal mechanical properties at room temperature

Sample size: bar diameter (square bar, hexagonal bar inscribed circle diameter) of 150 or less

 

Heat treatment specification:

1) homogenizing annealing: heating to 440 ℃. Holding time 12 ~ 14 h;Air cooling.

2) rapid annealing: heating to 350 ~ 350 ℃.The heat preservation time of 30 ~ 120 min;Air or water.

3) high temperature annealing: heating to 350 ~ 350 ℃.Thickness or < 6 mm or 6 mm, heat preservation time is 2 ~ 10 min or 10 ~ 30 min;Air cooling.

4) low temperature annealing: heating to 250 ~ 300 ℃and 150 ~ 180 ℃;Holding time is 1 ~ 2 h, air cooling.

 

If any need in Alloy 5A02inquiry, please contact us by email.

 

 

 

 

Product Categories

Used Alloy

Thickness(mm)

Width(mm)

Length(mm)

Heat Treatment

Hot-Rolled Thick plate

1060/1070/1100

8~200

≤1350

≤9000

H112

3003/3A21

8~200

≤1350

6061/6A02

8~10

≤1250

5052/5A02

8~10

≤1250

10~200

≤1350

5754

8~10

≤1200

10~200

≤1350

5083

8~10

≤1000

10~15

≤1250

15~200

≤1350

5A05

15~200

≤1350

 

Product Categories

Used Alloy

Thickness(mm)

Width(mm)

Volume Weight(t)

Coil Diameter(mm)

Heat Treatment

Hot-Rolled
Billet Volume

1060/1070/1100
3003/3A21,
3004,5005
6061/6A02,8011

7.0~16

900

4.5

505/605

F

1040

5.0

1080

5.0

1240

6.0

1280

6.0

5052/5A02

8.0~10

900

4.0

1040

5.0

1080

5.0

1240

5.5

1280

5.5

5754

8~10

900

4.0

1040

4.5

1080

4.5

1240

5.0

1280

5.0

 

 

 

 

Product Categories

Used Alloy

Thickness(mm)

Width(mm)

Length(mm)

Coil Weight(t)

Heat Treatment

Cold-Rolled
Coil Plate

1060/1070/1100

0.2~3.5

≤1340

≤6000

<6(width:50mm~800mm,thickness:0.2~0.6mm)

O,

H12/22,

H14/24,

H16/26,

H18,

H32,

H34,

H36,

H38 

3003/3A21

≤1250

3004

≤1251

5005

≤1252

6061/6A02

≤1253

5052/5A02

≤1254

5754

≤1255

8011

≤1256

 

 

 

 

Aluminum wafer mold specifications(mm)

200

210

230

240

300

310

315

320

330

340

350

360

370

380

385

390

400

410

420

430

440

450

460

470

475

480

490

500

505

520

530

540

550

560

570

580

590

600

610

620

630

640

650

660

670

680

690

700

710

720

735

750

760

770

780

790

800

810

820

830

840

860

880

 

 

 

 

 

Other Products