EN 10028 – P275NH, P275NL1, P275NL2_

Product List

Contact Us

Tel: 0086-13598879167
Fax: 0086-371-88884766
Email: admin@gangsteel.com
Skype: gangsteel001@hotmail.com
Address: Gelin international Building,Zhengzhou city,Henan Province,China

Home > Products > Carbon Steel Plate > Carbon Steel Plate Material >

Carbon Steel Plate Material

EN 10028 – P275NH, P275NL1, P275NL2

/uploads/soft/151127/EN10028–P275NH,P275NL1,P275NL2.docx

EN 10028 – P275NH, P275NL1, P275NL2

1.Pressure Vessel Steel Home Page

EN 10028

P235GH | P265GH | P295GH | P355GH | P275 NH/NL1/NL2 | P355 NH/NL1/NL2

P460 NH/NL1/NL2

2.P275NH, P275NL1 & P275NL2 – wieldable fine grain pressure vessel steels from our warehouse P275NH is a wieldable fine-grain steel suitable for the fabrication of pressure vessels for pressurized gases and chemicals, industrial boilers, compressors and heat exchangers. The grade is intended for use in moderate to high temperature service.

3.Other grade types include...

NL1 – is ideal for use in low temperatures

NL2 – is ideal for use in especially low temperatures

We offers P275NH from stock and deliver worldwide. Our carbon plates are also tested to the most stringent standards which makes the suitability of our stock even greater and ensures you get a quicker delivery.

4.Please refer to the data tables below for more information.

Table 1: Chemical Composition of EN 10028 P275 NH, P275 NL1 & P275 NL2

Element	P275NH	P275NL1	P275NL2	Element	P275NH	P275NL1	P275NL2
Carbon (C) max.	0.16	0.16	0.16	Silicon (Si) max.	0.40	0.40	0.40
Manganese (Mn)	0.80 to 1.50	0.80 to 1.50	0.80 to 1.50	Phosphorous (P) max.	0.025	0.025	0.020
Sulphur (S) max.	0.015	0.015	0.010	Chromium (Cr) max.	0.30	0.30	0.30
Molybdenum (Mo) max.	0.08	0.08	0.08	Nickel (Ni) max.	0.50	0.50	0.50
Niobium (Nb) max.	0.05	0.05	0.05	Titanium (Ti) max.	0.03	0.03	0.03
Vanadium (Vi) max.	0.05	0.05	0.05	Nitrogen (N) max.	0.012	0.012	0.012
Aluminium (Al) min.	0.020	0.020	0.020	Copper (Cu) max.	0.30	0.30	0.30

Chemical element composition is % by mass.

The combined quantities of Niobium, Titanium and Vanadium should be 0.05% max. Table 2: Mechanical Properties of EN 10028 P275 NH, P275 NL1 & P275 NL2

Grade	Type	Thickness (mm)	Yield Strength MPa (min)	Tensile Strength MPa	Elongation % (min)
P275 NH P275 NL1 P275 NL2	Normalized	≤ 16 16> to ≤40 40> to ≤60 60> to ≤100 100> to ≤150 150> to ≤250	275 265 255 235 225 215	390 to 510 390 to 510 390 to 510 370 to 490 360 to 480 350 470	24 24 24 23 23 23

(Please note: the technical information above is for guidance only – for exact specifications please check with our Sales Team)

5.To find out more about P275 NH, NL1 & NL2 and to receive a competitive quotation for the supply of this material, please contact us.

Other Products