Product List
Gangsteel Material Solution
Email: admin@gangsteel.com
Sales: jack@gangsteel.com
RHS 400*200*6MM,S275J0H Rectangular Tube,S275J0H hollow sections,S275J0H
Adopt standard: S275J0H steel EN10210-1
The number of this European Standard(EN 10210)
The symbol S is structural steel, 275 for the minimum yield strength in thickness not greater than 16mm.
The Symbol J and number 0 or 2 mean for the qualities with specified impact properties at 0℃and -20℃respectively.
The capital letter H indicates hollow sections.
About S275J0H detail information，please consult technical date in following.
S275J0H The Chemical composition –Ladle analysis for product thickness≤65mm
|
Designation |
Type of deoxidation |
Sub Grop |
C % max. Nominal thickness(mm) |
Si % max.
|
Mn % max.
|
P % max.
|
S % max.
|
N % max.
|
||
|
According to EN 10027-1 and IC 10 |
According to EN 10027-2 |
≤40 |
>40 ≤65 |
|||||||
|
S275J0H |
1.0149 |
FN |
QS |
0.20 |
0.22 |
- |
1.50 |
0.040 |
0.040 |
0.009 |
1)The deoxidation methods are designated as follows:
FN-Rimming steel not permitted.
2)QS-quality steel.
3)It is permissible to exceed the specified values provided that for each increase of 0.001%N the P max content will be reduced by 0.005%,the N content of the ladle analysis ,however,shall not be more than 0.012%
4)The max. value for nitrogen does not apply if the chemical composition shows a minimum total Al content of 0.020% with a minimum AL/N ratio of 2:1, or if sufficient other N-binding elements are present. The N-binding elements shall be recorded in Inspection Document.
S275J0H Mechanical properties for non-alloy structural steel hollow section
|
Designation |
Minimum yield strength REhin N/mm2 |
Tensile strength Rmin N/mm2 |
Minimum percentage elongation L0-5,65√S0 |
Impact properties |
||||||||
|
According to EN 10027-1 and IC 10 |
According to EN 10027-2 |
Nominal thickness in mm |
Nominal thickness in mm |
Longitudinal |
Transverse |
Test temperature |
Minimum average absorbed energy(J)for standard test pieces |
|||||
|
≤16 |
>16 ≤40 |
>40 ≤65 |
<3
|
≥ 3≤65 |
Nominal thickness in mm |
|||||||
|
≤40 |
>40 ≤65 |
≤40 |
>40 ≤65 |
|||||||||
|
S275J0H |
1.0149 |
275 |
265 |
255 |
430- 580 |
410- 560 |
22 |
21 |
20 |
19 |
0 |
27 |
Production Size:
|
Rectangular Tube |
|
Rectangular Tube |
||||
|
Size |
Thick |
Length |
|
Size |
Thick |
Length |
|
mm |
mm |
Meters |
|
mm |
mm |
Meters |
|
500*300mm |
8-12mm |
3m-12m |
|
120*40mm |
2-4mm |
3m-12m |
|
450*250mm |
6-12mm |
3m-12m |
|
100*80mm |
2-8mm |
3m-12m |
|
400*300mm |
6-12mm |
3m-12m |
|
100*60mm |
2-5mm |
3m-12m |
|
400*200mm |
6-12mm |
3m-12m |
|
100*50mm |
1-5mm |
3m-12m |
|
350*250mm |
6-12mm |
3m-12m |
|
100*40mm |
2-3mm |
3m-12m |
|
350*150mm |
6-12mm |
3m-12m |
|
90*60mm |
2-4mm |
3m-12m |
|
300*200mm |
6-12mm |
3m-12m |
|
80*60mm |
1.4-4mm |
3m-12m |
|
300*150mm |
6-12mm |
3m-12m |
|
80*50mm |
1.2-3mm |
3m-12m |
|
300*100mm |
4-10mm |
3m-12m |
|
80*40mm |
0.9-4mm |
3m-12m |
|
280*180mm |
4-10mm |
3m-12m |
|
70*50mm |
1.2-4mm |
3m-12m |
|
250*150mm |
4-10mm |
3m-12m |
|
70*30mm |
1.5-3mm |
3m-12m |
|
250*100mm |
4-10mm |
3m-12m |
|
60*40mm |
0.8-4mm |
3m-12m |
|
200*150mm |
4-10mm |
3m-12m |
|
60*30mm |
0.8-3mm |
3m-12m |
|
200*100mm |
4-10mm |
3m-12m |
|
50*40mm |
0.8-3mm |
3m-12m |
|
200*95mm |
4-10mm |
3m-12m |
|
50*30mm |
0.7-4mm |
3m-12m |
|
160*80mm |
4-10mm |
3m-12m |
|
50*25mm |
0.7-3mm |
3m-12m |
|
150*100mm |
3-10mm |
3m-12m |
|
50*20mm |
0.7-1.7mm |
3m-12m |
|
150*90mm |
3-10mm |
3m-12m |
|
40*30mm |
0.7-3mm |
3m-12m |
|
150*75mm |
3-8mm |
3m-12m |
|
40*25mm |
0.7-2.5mm |
3m-12m |
|
140*80mm |
3-10mm |
3m-12m |
|
40*20mm |
0.6-3mm |
3m-12m |
|
120*100mm |
3-10mm |
3m-12m |
|
30*20mm |
0.6-2mm |
3m-12m |
|
120*80mm |
2-8mm |
3m-12m |
|
20*14mm |
0.5-1.2mm |
3m-12m |
|
120*60mm |
2-5mm |
3m-12m |
|
20*10mm |
0.5-1.2mm |
3m-12m |
|
120*50mm |
2-5mm |
3m-12m |
|
|
|
|
For more information in quality certificate or inquiry in competitive official quotation, please contact us by email or calling.
EN10028-2 P355GH for High-Strength Low-Alloy Columbium-Vanadium Structural Steel EN10025-2 S355J2 Structural St
We export A240 304L Stainless Coil 2B, NO.1 No.4 surface, the thickness 0.1mm to 3mm, 3mm to 22mm, Mother mill
ASTM A516 GR 70 equivalent materials is such as ASME SA516 GR 70, EN 10028 P355GH, and BS1501 224-490 A & B, sh
The astm a516 gr 70 yield strength of 260 MPa ensures structural integrity in high-pressure applications, such
