Product List
Tel: 0086-13598879167
Fax: 0086-371-88884766
Email: admin@gangsteel.com
Skype: gangsteel001@hotmail.com
Address: Gelin international Building,Zhengzhou city,Henan Province,China
P355GH AND S355J2 Steel Plates Analyze
1. P355GH Adopt standard: EN10028-2 Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel
EN10025-2 steel plate in S355J2. For more information of S355J2 steel plates
2. P355GH Specification: Thickness: 1mm to 200mm; Width: 1500mm to 3500mm: Length: 3000mm to 27000mm
3. Third Party Inspection for P355GH: ABS, DNV, BV, GL, CCS, LR, RINA, KR, NK, CE, SGS, IKE, IEI or other quality department.
4. P355GH Chemical composition% of the Product analysis of grade
|
P355GH Chemical Composition |
|||||||
|
Grade |
The Element Max (%) |
||||||
|
C |
Si |
Mn |
P |
S |
Al(min) |
N |
|
|
P355GH |
0.10-0.22 |
0.60 |
1.10-1.70 |
0.025 |
0.015 |
0.020 |
0.012 |
|
Cr |
Cu |
Mo |
Nb |
Ni |
Ti |
V |
|
|
0.30 |
0.30 |
0.08 |
0.040 |
0.30 |
0.03 |
0.02 |
|
S355J2 Chemical composition % of the Product analysis of grade
|
C |
Si |
Mn |
Ni |
P |
S |
Cr |
Mo |
|
max 0.24 |
0.60 |
1.70 |
|
Max 0.035 |
Max 0.035 |
|
|
|
V |
Nb |
Ti |
N |
Cu |
|
|
|
|
|
|
|
|
0.60 |
|
|
|
5. P355GH Mechanical Property
|
Grade |
|
P355GH Mechanical Property |
|||||
|
Thickness |
Yield |
Tensilmie |
Elongation |
Impact Energy(KV J) min |
|||
|
P355GH |
mm |
Min Mpa |
Mpa |
Min % |
-20° |
0° |
+20° |
|
≤ 16 |
355 |
510-650 |
20 |
27 |
34 |
40 |
|
|
16> to ≤40 |
345 |
510-650 |
20 |
27 |
34 |
40 |
|
|
40> to ≤60 |
335 |
510-650 |
20 |
27 |
34 |
40 |
|
|
60> to ≤100 |
315 |
490-630 |
20 |
27 |
34 |
40 |
|
|
100> to ≤150 |
295 |
480-630 |
20 |
27 |
34 |
40 |
|
|
150> to ≤250 |
280 |
470-630 |
20 |
27 |
34 |
40 |
|
S355J2 Mechanical Property
|
|
-150 |
150-250 |
250-400 |
|
|||||||||||
|
Minimum energy nominal thicknessTemperature(-20) |
27 |
27 |
27 |
|
|||||||||||
|
Nominal thickness (mm) |
to 16 |
16 - 40 |
40 - 63 |
63 - 80 |
80 - 100 |
100 - 150 |
150 - 200 |
200-250 |
250-400 |
||||||
|
ReH - Minimum yield strength (MPa) |
355 |
345 |
335 |
325 |
315 |
295 |
285 |
275 |
265 |
||||||
|
Nominal thickness (mm) |
-3 |
3-100 |
100-150 |
150-250 |
250-400 |
||||||||||
|
Rm -Tensile strength (MPa) |
510-680 |
470-630 |
450-600 |
450-600 |
450-600 |
||||||||||
|
Nominal thickness (mm) |
3-40 |
40-63 |
63-100 |
100-150 |
150-250 |
250-400 |
|
A - Minimum elongation Lo = 5,65 √ So (%) |
22 |
21 |
20 |
18 |
17 |
17 |
EN10028 steel grade supersedes the older BS and DIN standards. P355GH steel grade is one of grade in En10028-2, which is non alloy and alloy steels with specified elevated temperature properties. P355GH grade are used above all for manufacturing boilers, pressure vessels and pipes transporting hot liquids.
GANGSTEEL Galvanized Coil Steel Stock List and Price 2016-02-25
The tension was high as Gregoire Parenty and Martin Lindqvist took the stage to announce the winner of the 2015
EN10025-5 S355J0WP,S355J2WP,S355J0W,S355J2W steel plate
DIN 17155 HII | HII steel plate DIN standard HII pressure vessel steel has now been superseded with the Euro No
