EN 10025-3 S460NL/ML Enhanced Toughness
At Gangsteel, we're passionate about EN 10025-3 S460NL/ML, a high-strength, low-alloy structural steel that combines the best of normalized and thermomechanically rolled variants for superior toughness in cold climates. As part of the en 10025 3 normalized steel plate family, S460NL/ML is engineered with a fine-grain structure to deliver exceptional impact resistance and weldability, making it perfect for heavy-duty applications like offshore platforms and arctic bridges.
Gangsteel explores the enhanced toughness of EN 10025-3 S460NL/ML, its chemical composition, mechanical properties, welding, and applications, with comparisons to grades like en 10025 3 s420nl normalized structural steel plate and en 10025 3 s355nl normalized structural steel plate. For more details, check out our en 10025 3 s460nl normalized structural steel plate.
What is EN 10025-3 S460NL/ML Steel?
EN 10025-3 S460NL/ML is a high-strength structural steel with a minimum yield strength of 460 MPa for plates up to 16 mm thick. The "NL" indicates normalized with -50°C toughness, while "ML" refers to the thermomechanical variant under EN 10025-4 with similar properties but better formability. Its designation breaks down as:
- S: Structural steel.
- 460: Minimum yield strength in MPa.
- NL/ML: Normalized (NL) or thermomechanically rolled (ML), both tested for impact toughness at -50°C.
This combination ensures EN 10025-3 S460NL/ML offers enhanced toughness for cold environments, with normalization refining the grain structure for strength and weldability. Compared to en 10025 3 s355nl normalized structural steel plate, S460NL/ML provides higher strength for more demanding loads.
Chemical Composition of S460NL/ML
Gangsteel ensures S460NL/ML’s chemical composition is optimized for toughness and cold-weather strength:
|
Element |
S460NL (Ladle, max %) |
S460ML (Ladle, max %) |
|---|---|---|
|
Carbon (C) |
0.20 |
0.20 |
|
Silicon (Si) |
0.60 |
0.60 |
|
Manganese (Mn) |
1.00-1.70 |
1.00-1.70 |
|
Phosphorus (P) |
0.025 |
0.025 |
|
Sulfur (S) |
0.020 |
0.020 |
|
Nitrogen (N) |
0.025 |
0.025 |
|
Aluminum (Al) |
0.020 (min, total) |
0.020 (min, total) |
|
Niobium (Nb) |
0.05 |
0.05 |
|
Vanadium (V) |
0.20 |
0.20 |
|
Titanium (Ti) |
0.05 |
0.05 |
|
Chromium (Cr) |
0.30 |
0.30 |
|
Nickel (Ni) |
0.80 |
0.80 |
|
Molybdenum (Mo) |
0.10 |
0.10 |
|
Copper (Cu) |
0.55 |
0.55 |
Key Elements:
- Low Carbon: 0.20% max ensures clean welds and toughness.
- Manganese: 1.00-1.70% boosts strength for heavy structures.
- Aluminum & Niobium: Refine grains for -50°C toughness, a key EN 10025-3 S460NL/ML feature.
- Low Sulfur & Phosphorus: Minimize inclusions for superior weld quality.
The Carbon Equivalent (CEV) is capped at 0.48% for plates up to 63 mm, ensuring easy welding, similar to en 10025 3 s420nl normalized structural steel plate.
Mechanical Properties and Enhanced Toughness
EN 10025-3 S460NL/ML mechanical properties emphasize enhanced toughness for cold climates:
|
Property |
S460NL (EN 10025-3) |
S460ML (EN 10025-4) |
|---|---|---|
|
Yield Strength (min, MPa) |
||
|
≤16 mm |
460 |
460 |
|
16<t≤40 mm |
440 |
460 |
|
40<t≤63 mm |
430 |
450 |
|
63<t≤80 mm |
410 |
430 |
|
Tensile Strength (MPa) |
540-720 |
540-720 |
|
Elongation (min, %) |
17 (≤63 mm) |
17 (≤63 mm) |
|
Impact Toughness (min, J) |
27 @ -50°C |
27 @ -50°C |
- Toughness: Both deliver ≥27 J at -50°C, ensuring cold-climate reliability, but S460ML’s TMCP process may enhance grain consistency for thinner sections.
- Strength: Similar yield (460 MPa) and tensile strength (540-720 MPa), with S460ML maintaining higher yield in thicker sections.
- Elongation: ≥17% supports ductility for complex designs.
- Hardness: Typically 170-210 HB (Brinell), balancing machinability and durability.
EN 10025-3 S460NL/ML’s enhanced toughness makes it superior for sub-zero applications.
Welding and Heat Treatment
EN 10025-3 S460NL/ML is highly weldable with a low CEV (≤0.48%):
- Welding: GMAW and SAW per EN 1011-2. Preheating (100-150°C) for >20 mm; PWHT at 550-650°C optional.
- Consumables: ER70S-6 for GMAW, EM12K flux with EH14 wire for SAW.
- Weld Quality: Matches en 10025 3 s355n normalized structural steel plate for reliable, high-strength welds.
Applications
Gangsteel supplies EN 10025-3 S460NL/ML for:
- Offshore Platforms: Cold marine environments with -50°C toughness.
- Wind Turbine Towers: Cyclic loads in sub-zero climates.
- Bridges and Cranes: Northern regions like Scandinavia.
- Heavy Machinery: Structural parts for extreme conditions.
For lower-strength needs, consider en 10025 3 s275nl normalized structural steel plate.
Why Choose Gangsteel?
Gangsteel is your trusted source for EN 10025-3 S460NL/ML:
- Inventory: Large stock in China for quick delivery.
- Sizes: Thicknesses from 6–200 mm, widths up to 3000 mm, lengths up to 12,000 mm.
- Delivery: Ships globally in 7-30 days.
- Certifications: EN 10204 3.1/3.2, UT testing (EN 10160), and ABS/LR/BV/DNV approvals.
- Processing: Cutting, welding, and bending tailored to your needs.
Contact us for en 10025 3 s460nl normalized structural steel plate.
FAQ
What is EN 10025-3 S460NL/ML?
Gangsteel offers EN 10025-3 S460NL/ML, a high-strength steel with ≥460 MPa yield strength and -50°C toughness, ideal for cold-climate structures like offshore platforms.
What are the key properties of EN 10025-3 S460NL/ML?
EN 10025-3 S460NL/ML has a yield strength of ≥460 MPa, tensile strength of 540-720 MPa, ≥17% elongation, and ≥27 J impact toughness at -50°C, ensuring enhanced toughness.
Is EN 10025-3 S460NL/ML weldable?
Yes, with a CEV ≤0.48%, EN 10025-3 S460NL/ML is highly weldable using GMAW or SAW with preheating (100-150°C for >20 mm) for strong joints.
What applications use EN 10025-3 S460NL/ML?
EN 10025-3 S460NL/ML is used in offshore platforms, wind towers, bridges, and cranes in cold climates, leveraging its strength and toughness.
How does EN 10025-3 S460NL/ML compare to S355NL?
EN 10025-3 S460NL/ML has higher yield strength (460 MPa vs 355 MPa) than S355NL, with similar -50°C toughness, for more demanding projects.
What certifications support EN 10025-3 S460NL/ML?
Gangsteel provides EN 10025-3 S460NL/ML with EN 10204 3.1/3.2, UT testing (EN 10160), and ABS/LR/BV/DNV approvals for global compliance.
-
BHW35 Steel Plate for Sale | RF
BHW35 / 13MnNiMo5-4 (DIWA 353 family): identity, chemistry, mechanical properties, related grades, and RFQ note
-
ASTM A516 Grade 70 Equivalent:
ASTM A516 Grade 70 equivalents include ASME SA516 Gr 70, EN 10028-2 P355GH and BS 1501 224-490. Gangsteel compa
-
What is the difference between
we supply high-quality A516 Gr 70 steel plate for pressure vessel applications and other standards like ASTM A2
-
P355GH AND S355J2 Steel Plates
EN10028-2 P355GH for High-Strength Low-Alloy Columbium-Vanadium Structural Steel EN10025-2 S355J2 Structural St
