ASME SA515/SA515M HIC STEEL PL

SA515GR60 NACE Steel Plate Specifications

ASTM A515 / A515M Grade 60 (ASME SA515 Grade 60) with NACE / sour-service options as ordered is a carbon-silicon pressure-vessel plate for intermediate- and higher-temperature service grade under ASTM A515/A515M; ASME SA515. This specification page covers grade identity, chemistry, mechanical requirements, related grades, and RFQ practice. Accept material against the ordered edition and the mill test certificate.

Grade Identity and Delivery Condition

ASTM A515 / A515M Grade 60 (ASME SA515 Grade 60) with NACE / sour-service options as ordered is supplied for projects that name this designation on the purchase order or calculation sheet. Standard delivery condition is As-rolled or normalized as ordered; killed; coarse austenitic grain practice per A515. Gangsteel supplies export plate and related products with EN 10204 documentation. Do not accept an alternate heat-treatment route unless a written concession changes the specification requirement.

Chemical Composition - Heat Analysis (ASTM A515 / A515M Grade 60 (ASME SA515 Grade 60) with NACE / sour-service options as ordered)

Heat analysis for Grade 60. Modern purchaser specs may tighten P/S. NACE MR0175/ISO 15156 hardness, HIC/SSC or other sour extras are purchaser requirements - confirm on PO/MTC; base plate chemistry remains A515/SA515.

Element / ruleRequirement
C, max (t<=25 mm)0.24
C, max (25 < t <= 50 mm)0.27
C, max (50 < t <= 100 mm)0.29
C, max (t>100 mm)0.31
Mn, max (heat)0.90
Mn, max (product)0.98
P, max0.035
S, max0.035
Si, heat0.15-0.40

Mechanical Properties (ASTM A515 / A515M Grade 60 (ASME SA515 Grade 60) with NACE / sour-service options as ordered)

Confirm thickness, specimen orientation, and any supplementary impact, UT, or hardness requirements on the PO.

PropertyRequirement
Tensile strength60-80 ksi [415-550 MPa]
Yield strength, min32 ksi [220 MPa]
Elongation in 200 mm, min21%
Elongation in 50 mm, min25%

Related / Near-Equivalent Grades

Near-equivalents are for cross-reference only. They are not automatic code substitutes. Substitution requires engineer approval and matching certificate scope.

SystemGradeNote
ASMESA515 Grade 60ASME twin
ASTMA516 Grade 60Lower-temp fine-grain sister - not identical
RelatedSA516GR60-NACENACE ordering pattern parallel

Frequently Asked Questions

What is ASTM A515 / A515M Grade 60 (ASME SA515 Grade 60) with NACE / sour-service options as ordered?

ASTM A515 / A515M Grade 60 (ASME SA515 Grade 60) with NACE / sour-service options as ordered is a carbon-silicon pressure-vessel plate for intermediate- and higher-temperature service under ASTM A515/A515M; ASME SA515. It is ordered when drawings or the calculation sheet name this designation specifically.

What chemical composition applies to ASTM A515 / A515M Grade 60 (ASME SA515 Grade 60) with NACE / sour-service options as ordered?

Controlled elements and limits are tabulated above from the governing standard. Always verify the heat analysis on the MTC against the ordered edition.

What mechanical properties should buyers expect for ASTM A515 / A515M Grade 60 (ASME SA515 Grade 60) with NACE / sour-service options as ordered?

Tensile, yield, elongation, and related limits are tabulated above. Design allowables must come from the applicable pressure-vessel or structural code, not from a web summary.

What delivery condition is required for ASTM A515 / A515M Grade 60 (ASME SA515 Grade 60) with NACE / sour-service options as ordered?

Standard delivery is As-rolled or normalized as ordered; killed; coarse austenitic grain practice per A515. State it explicitly on the PO. Do not accept an alternate route without a written concession.

How does ASTM A515 / A515M Grade 60 (ASME SA515 Grade 60) with NACE / sour-service options as ordered differ from near-equivalent grades?

Near-equivalents may differ in carbon or alloy bands, tensile class, impact temperature, or heat treatment. Substitution needs engineering approval and matching certificate scope.

How do I RFQ ASTM A515 / A515M Grade 60 (ASME SA515 Grade 60) with NACE / sour-service options as ordered from Gangsteel?

Send ASTM A515 / A515M Grade 60 (ASME SA515 Grade 60) with NACE / sour-service options as ordered, thickness x width x length, quantity or tonnage, delivery condition, optional impact/UT/Z tests, EN 10204 3.1 or 3.2, destination, and any dual-mark needs. Gangsteel replies with mill options, lead time, and packing notes.

Ordering and Mill Certificates

State grade ASTM A515 / A515M Grade 60 (ASME SA515 Grade 60) with NACE / sour-service options as ordered, dimensions, quantity, delivery condition, optional NDT/PMI, and certificate (EN 10204 3.1 standard; 3.2 when third-party inspection is ordered). Gangsteel supplies export plate and related products with mill test certificates. Contact Gangsteel for stock and mill production RFQs.

Other Products