API 5L Steel Plate

API 5L X56|X56 STEEL PLATE

API 5L standard specification for line pipe

The purpose of this specification is to provide standards for pipe suitable for use in conveying gas, water, and oil in both the oil and natural gas industries.

This specification covers seamless and welded steel line pipe. It includes plain-end, threaded-end, and belled-end pipe, as well as through-the-flowline (TFL) pipe and pipe with ends prepared for use with special couplings.

 

Gangsteel is specialized in supplying API 5L steel plate in X56. For more information of API 5L X56 steel plates, please check them in following:

 

PSL 1API 5L X56 Chemical Composition

Grade

The Element Max (%)

C

Ti

Mn

P

S

PSL 1API 5L X56

Seamless

0.28

0.04

1.40

0.03

0.03

Welded

0.26

0.04

1.40

0.03

0.03

 

PSL 2API 5L X56 Chemical Composition

Grade

The Element Max (%)

C

Ti

Mn

P

S

PSL 2API 5L X56

Seamless

0.24

0.04

1.40

0.025

0.015

Welded

0.22

0.04

1.40

0.025

0.015

 

 

 

Grade

 

PSL 1API 5L X56 Mechanical Property

Thickness

mm

Yield

Tensile

Elongation

PSL 1API 5L X56

Min Mpa

Mpa

Min  %

 

386

490

a

 

Grade

 

PSL 2API 5L X56 Mechanical Property

Thickness

mm

Yield

Tensile

Elongation

PSL 2API 5L X56

Min Mpa

Mpa

Min  %

 

386-544

490-758

a

 

 

  1. The minimum elongation in 2 in. (50.8 mm) shall be that determined by the following equation:

U.S.Customary Unit Equation: e= 625,000*A0.2/U0.9; SI Unit Equation: e= 1,944A0.2/U0.9

Where e= minimum elongation in 2 in. (50.8 mm) in percent rounded to the nearest percent.

A= applicable tensile test specimen area, as follows:

  1. For round bar specimens:

-----0.20 in.2 (130 mm2) for the 0.500 in. and 0.350 in. specimens,

-----0.10 in.2 (65 mm2) for the 0.250 in. specimen

  b. For full section specimens, the smaller of (i) 0.75 in.2(485 mm2) and (ii) the cross-sectional area of the test specimen, calculated using the specified outside diameter of the pipe and the specified wall thickness of the pipe, rounded to the nearest 0.01 in.2(10 mm2);

c. For strip specimens, the smaller of (i) 0.75 in.2 (485 mm2) and (ii) the cross-sectional area of the test specimen, calculated using the specified width of the test specimen and the specified wall thickness of the pipe, rounded to the nearest 0.01 in.2 (10 mm2).

U = speciÞed minimum ultimate tensile strength in psi (MPa).

 

Shipbuilding steel plate| Alloy steel plates| High strength plate| Carbon steel plate| Stainless steel plate

 

 

 

If you need more stock steel plates in pressure vessel steel plate, please click warehouse sizes.

 

Related Grade: X42, X46, X52, X56, X60, X65, X70

 

 

Other Products