stainless steel stock
A240 TP2205 Steel Plate Specifications
ASTM A240 / ASME SA240 duplex 2205 (UNS S32205) is a duplex stainless steel plate/sheet (2205) grade under ASTM A240/A240M; ASME SA240. This specification page covers grade identity, chemistry, mechanical requirements, related grades, and RFQ practice. Accept material against the ordered edition and the mill test certificate.
Grade Identity and Delivery Condition
ASTM A240 / ASME SA240 duplex 2205 is supplied for projects that name this designation on the purchase order or calculation sheet. Standard delivery condition is Solution annealed and quenched. Gangsteel supplies export plate and related products with EN 10204 documentation. Do not accept an alternate heat-treatment route unless a written concession changes the specification requirement.
Chemical Composition - Heat Analysis (ASTM A240 / ASME SA240 duplex 2205)
Heat / cast analysis for S32205 (modern 2205). Older S31803 chemistry is leaner - confirm UNS on MTC.
| Element | Min % | Max % / requirement |
|---|---|---|
| C | - | <=0.030 |
| Mn | - | <=2.00 |
| Si | - | <=1.00 |
| P | - | <=0.030 |
| S | - | <=0.020 |
| Cr | 22.0 | 23.0 |
| Ni | 4.5 | 6.5 |
| Mo | 3.0 | 3.5 |
| N | 0.14 | 0.20 |
Mechanical Properties (ASTM A240 / ASME SA240 duplex 2205)
Confirm thickness, specimen orientation, and any supplementary impact, UT, or hardness requirements on the PO.
| Property | Requirement |
|---|---|
| Tensile strength, min | 620 MPa (90 ksi) |
| Yield strength (0.2% offset), min | 450 MPa (65 ksi) |
| Elongation in 50 mm, min | 25% |
| Hardness, max | 293 HBW / 31 HRC |
| Delivery condition | Solution annealed |
Related / Near-Equivalent Grades
Near-equivalents are for cross-reference only. They are not automatic code substitutes. Substitution requires engineer approval and matching certificate scope.
| System | Grade | Note |
|---|---|---|
| ASME | SA240 S32205 | ASME twin |
| ASTM | S31803 | Earlier 2205 UNS - confirm PO |
| EN | 1.4462 / X2CrNiMoN22-5-3 | Confirm edition |
| UNS | S32205 | 2205 designation |
Frequently Asked Questions
What is ASTM A240 / ASME SA240 duplex 2205?
ASTM A240 / ASME SA240 duplex 2205 (UNS S32205) is a duplex stainless steel plate/sheet (2205) under ASTM A240/A240M; ASME SA240. It is ordered when drawings or the calculation sheet name this designation specifically.
What chemical composition applies to ASTM A240 / ASME SA240 duplex 2205?
Controlled elements and limits are tabulated above from the governing standard. Always verify the heat analysis on the MTC against the ordered edition.
What mechanical properties should buyers expect for ASTM A240 / ASME SA240 duplex 2205?
Tensile, yield, elongation, and related limits are tabulated above. Design allowables must come from the applicable pressure-vessel or structural code, not from a web summary.
What delivery condition is required for ASTM A240 / ASME SA240 duplex 2205?
Standard delivery is Solution annealed and quenched. State it explicitly on the PO. Do not accept an alternate route without a written concession.
How does ASTM A240 / ASME SA240 duplex 2205 differ from near-equivalent grades?
Near-equivalents may differ in carbon or alloy bands, tensile class, impact temperature, or heat treatment. Substitution needs engineering approval and matching certificate scope.
How do I RFQ ASTM A240 / ASME SA240 duplex 2205 from Gangsteel?
Send ASTM A240 / ASME SA240 duplex 2205 (UNS S32205), thickness x width x length, quantity or tonnage, delivery condition, optional impact/UT/Z tests, EN 10204 3.1 or 3.2, destination, and any dual-mark needs. Gangsteel replies with mill options, lead time, and packing notes.
Ordering and Mill Certificates
State grade ASTM A240 / ASME SA240 duplex 2205 (UNS S32205), dimensions, quantity, delivery condition, optional NDT/PMI, and certificate (EN 10204 3.1 standard; 3.2 when third-party inspection is ordered). Gangsteel supplies export plate and related products with mill test certificates. Contact Gangsteel for stock and mill production RFQs.
-
316Ti Stainless Steel Bars &
Gangsteel is your trusted global supplier. Our extensive inventory of 316Ti stainless steel bars and pipes meet
-
A240 TP316H,TP316H Stainless pl
Gangsteel Stainless Factory is the large manufacturer to supply ASTM A240 TP316H,TP316H Stainless plate,TP316H
-
A240 TP310S,TP 310S,TP310S Stai
A240 TP310S,TP310S Stainless plate,TP310S stock,TP310S Supplier Gangsteel Stainless Factory is the large manufa
