Product List
Gangsteel Material Solution
Email: admin@gangsteel.com
Sales: jack@gangsteel.com
Published: November 11, 2025 | Updated: November 11, 2025By Gangsteel Engineering Team – 25+ Years in Stainless Steel Export Excellence
In the global stainless steel landscape compliant with ASTM A240/A240M and ASME SA240/SA240M standards, 316Ti emerges as a titanium-stabilized austenitic grade whose material number 1.4571 (X6CrNiMoTi17-12-2) under EN 10088-2/EN 10095 defines its equivalence and use in high-temperature and corrosive applications.
As a premier producer and exporter based in China, Gangsteel has supplied thousands of tons of 316Ti stainless steel, meeting ASTM A240/A240M specs for plates and sheets, to industries like petrochemical, pharmaceutical, and marine.
If you're verifying material number 1.4571 for 316Ti under ASME SA240/SA240M for a welded component or pressure vessel where cross-standard compliance is key, understanding its link to UNS S31635 is essential. This article explores 316Ti's material number 1.4571, property comparisons, and practical insights, based on ASTM A240/A240M, ASME SA240/SA240M, and EN 10088-2/EN 10095 standards and our mill data.
From our production lines, we've facilitated material number swaps: In a 2024 German pharmaceutical project, our 316Ti plates under ASTM A240 /A240M matched material number 1.4571 properties, allowing direct substitution without re-testing, saving 20% on certification as per client reports. Compliant with ASME SA240/SA240M for pressure apps, 316Ti's density of 8.00 g/cm³ supports equivalent designs. Let's delve into the details, from composition to applications, to confirm why 316Ti is material number 1.4571.
316Ti stainless steel (UNS S31635) is assigned material number 1.4571 (X6CrNiMoTi17-12-2) under EN 10088-2/EN 10095, an AISI-aligned grade with identical titanium stabilization for high-temp IGC resistance, tensile strength 515 MPa min, yield 205 MPa min, and elongation 40% min. Both share PREN 23-28 and density 8.00 g/cm³, compliant with ASTM A240/A240M and EN 10088. Minor range differences (e.g., Ni) don't affect equivalence for most apps. Ideal for chemical reactors; Gangsteel offers dual-cert stock for seamless use.
The chemical composition of 316Ti, as specified in ASTM A240/A240M and ASME SA240/SA240M, closely matches material number 1.4571 under EN 10088-2/EN 10095, ensuring equivalence in stabilization and resistance.
|
Element |
316Ti (UNS S31635) % |
1.4571 % |
Equivalence Notes |
|---|---|---|---|
|
C |
0.08 max |
0.08 max |
Identical low C for ductility. |
|
Mn |
2.00 max |
2.00 max |
No difference. |
|
Si |
0.75 max |
1.00 max |
Slight higher max in 1.4571; both for oxidation. |
|
P |
0.045 max |
0.045 max |
Identical. |
|
S |
0.030 max |
0.030 max |
No difference. |
|
Cr |
16.00-18.00 |
16.50-18.50 |
Overlap for passivation. |
|
Mo |
2.00-3.00 |
2.00-2.50 |
Similar for pitting. |
|
Ni |
10.00-14.00 |
10.50-13.50 |
Balanced for austenite. |
|
Ti |
5x(C+N) min, 0.70 max |
5xC min, 0.70 max |
Ti for stabilization; equivalent binding. |
|
N |
0.10 max |
- |
Minor in 316Ti for strength. |
|
Fe |
Balance |
Balance |
Base matrix. |
Composition equivalence under ASTM A240/A240M and EN 10088 allows direct swap.
Gangsteel's 316Ti meets ASME SA240/SA240M with 1.4571 dual certs.
Both grades have comparable mechanicals, with equivalence in strength and ductility.
|
Property |
316Ti Min |
1.4571 Typical |
Notes |
|---|---|---|---|
|
Tensile Strength (MPa) |
515 |
500-700 |
Equivalent range. |
|
Yield Strength (MPa) |
205 |
200 |
Similar for load. |
|
Elongation (%) |
40 |
40 |
Identical ductility. |
|
Hardness (HRB max) |
95 |
215 HB max (converted) |
Tunable. |
|
Impact (Charpy J) |
Not req. |
100 at RT |
Similar toughness. |
Equivalence ensures same performance in apps.
For uns stainless steel plates, equivalence holds.
Both share physical properties, with no significant differences.
|
Property |
316Ti Value |
1.4571 Value |
Notes |
|---|---|---|---|
|
Density (g/cm³) |
8.00 |
8.00 |
Identical. |
|
Thermal Conductivity (W/m·K at 100°C) |
14.6 |
15.0 |
Minor difference. |
|
Specific Heat (J/kg·K) |
500 |
500 |
Identical. |
|
Thermal Expansion (10^-6 /°C, 20-100°C) |
16.5 |
16.0 |
Low for both. |
This equivalence supports direct design swaps.
Both have PREN 23-28 for similar corrosion, with Ti preventing IGC.
Both weld well; Ti eliminates annealing. Machinability ~60% for both.
Gangsteel's 316Ti SA240 Type 316Ti matches 1.4571 fab.
Both used in chemical reactors, marine fittings, power boilers—equivalence allows swaps.
In Gangsteel's supply to U.S. pharma, 316Ti matched 1.4571 without issue.
Gangsteel offers UNS S31635 / 1.4571 at $3,200-3,800/ton FOB, 1-200mm thick. Dual certs save on testing; contact for quotes.
For A240 GR 316Ti, equivalence confirmed.
Q: What is the material number 1.4571 for 316Ti stainless steel?
A: Material number 1.4571 (X6CrNiMoTi17-12-2) is the EN/DIN designation for 316Ti, with identical Ti stabilization and properties to UNS S31635.
Q: What are the differences between 316Ti and material number 1.4571?
A: No significant differences—1.4571 is the EN designation for 316Ti, with overlapping chemistry and mechanicals for full equivalence.
Q: Can I substitute material number 1.4571 for 316Ti in ASTM specs?
A: Yes, with high equivalence; dual-cert material from Gangsteel ensures compliance without issues.
Q: What standards cover 316Ti and material number 1.4571?
A: 316Ti under ASTM A240/A182; 1.4571 under EN 10088-3/EN 10222-5. Equivalent for plates/forgings.
Q: Are there any limitations in equivalence between 316Ti and 1.4571?
A: Minor range variances (e.g., Ni); fully equivalent for most apps.
Q: What is the density of 316Ti and material number 1.4571?
A: 8.00 g/cm³ for both 316Ti and 1.4571—identical for weight calculations.
Q: Where can I source 316Ti or material number 1.4571?
A: Gangsteel stocks both at $3,200-3,800/ton FOB, 1-200mm thick. Dual certs available.
Q: Is 316Ti equivalent to other grades like 316L or 321?
A: No—better than 316L in high-temp IGC, similar to 321 but with Mo for pitting; equivalents are specifically 1.4571-like grades.
ASTM A516 GR 70 equivalent materials is such as ASME SA516 GR 70, EN 10028 P355GH, and BS1501 224-490 A & B, sh
we supply high-quality A516 Gr 70 steel plate for pressure vessel applications and other standards like ASTM A2
EN10028-2 P355GH for High-Strength Low-Alloy Columbium-Vanadium Structural Steel EN10025-2 S355J2 Structural St
We export A240 304L Stainless Coil 2B, NO.1 No.4 surface, the thickness 0.1mm to 3mm, 3mm to 22mm, Mother mill
