316Ti Stainless Steel AISI 316Ti Equivalent
Published: November 11, 2025 | Updated: November 11, 2025By Gangsteel Engineering Team – 25+ Years in Stainless Steel Export Excellence
In the global stainless steel landscape compliant with ASTM A240/A240M and ASME SA240/SA240M standards, AISI 316Ti stainless steel emerges as a titanium-stabilized austenitic grade whose equivalents enable seamless material substitution across international standards for high-temperature and corrosive applications.
As a premier producer and exporter based in China, Gangsteel has supplied thousands of tons of AISI 316Ti stainless steel, meeting ASTM A240/A240M specs for plates and sheets, to industries like petrochemical, pharmaceutical, and marine.
If you're verifying equivalents for AISI 316Ti under ASME SA240/SA240M for a welded reactor or marine piping where cross-standard compliance is key, understanding its alternatives like EN 1.4571 or JIS SUS316Ti is vital. This article provides a comprehensive equivalent list for AISI 316Ti, property comparisons, and practical insights, based on ASTM A240/A240M and ASME SA240/SA240M standards and our mill data.
From our production lines, we've facilitated equivalent swaps: In a 2024 UK chemical project, our AISI 316Ti plates under ASTM A240 /A240M matched EN 1.4571 materials for traceability, allowing direct substitution without re-certification, saving 15% on compliance as per client reports. Compliant with ASME SA240/SA240M for pressure apps, AISI 316Ti's density of 8.00 g/cm³ supports equivalent designs. Let's delve into the equivalents, from composition to applications, to guide your sourcing.
Summary
AISI 316Ti stainless steel (UNS S31635) has equivalents including EN/DIN 1.4571 (X6CrNiMoTi17-12-2), JIS SUS316Ti, BS 320S31, AFNOR Z6CNDT17-12, SS 2350, GOST 08Ch17N13M2T, and GB/T 20878 – 06Cr17Ni12Mo2Ti, all sharing titanium stabilization for IGC resistance, tensile strength 515 MPa min, yield 205 MPa min, and elongation 40% min. Density 8.00 g/cm³, PREN 23-28 across equivalents. Minor range differences (e.g., Ni) don't affect equivalence for most apps under ASTM A240/A240M and EN 10088. Ideal for chemical reactors; Gangsteel offers dual-cert stock for seamless use.
Equivalent Material List for AISI 316Ti Stainless Steel
AISI 316Ti's equivalents are based on similar austenitic structures with Ti stabilization, allowing substitution in designs across regions. These grades share chemistry (Cr 16-18%, Mo 2-3%, Ni 10-14%, Ti ~0.5%) and properties for high interchangeability.
Equivalent Material List Table
|
Standard/Region |
Equivalent Grade |
Common Name/Notes |
|---|---|---|
|
EN/DIN (Europe) |
1.4571 (X6CrNiMoTi17-12-2) |
Direct match; used in EN 10088-3 for plates/sheets. |
|
JIS (Japan) |
SUS316Ti |
Japanese equivalent for high-temp welded parts. |
|
BS (UK) |
320S31 |
British standard for similar stabilization. |
|
AFNOR (France) |
Z6CNDT17-12 |
French variant with comparable IGC resistance. |
|
SS (Sweden) |
2350 |
Swedish equivalent for corrosion-resistant apps. |
|
GOST (Russia) |
08Ch17N13M2T |
Russian match for Ti-stabilized austenitic. |
|
GB (China) |
06Cr17Ni12Mo2Ti |
Chinese equivalent under GB/T 20878 for similar properties. |
Gangsteel's dual-cert stock (e.g., UNS S31635 / EN 1.4571) facilitates swaps, priced at $3,200-3,800/ton FOB for 1-200mm plates.
Property Comparison: Why Equivalents Work
Equivalents like 1.4571 have nearly identical properties to AISI 316Ti, with minor range variations.
Chemical Composition (% by Weight)
|
Element |
AISI 316Ti (UNS S31635) |
EN 1.4571 |
JIS SUS316Ti |
Notes |
|---|---|---|---|---|
|
C |
0.08 max |
0.08 max |
0.08 max |
Identical low C for ductility. |
|
Mn |
2.00 max |
2.00 max |
2.00 max |
No difference. |
|
Si |
0.75 max |
1.00 max |
1.00 max |
Slight higher max in equivalents; for oxidation. |
|
P |
0.045 max |
0.045 max |
0.045 max |
Identical. |
|
S |
0.030 max |
0.030 max |
0.030 max |
No difference. |
|
Cr |
16.00-18.00 |
16.50-18.50 |
16.00-18.00 |
Overlap for passivation. |
|
Mo |
2.00-3.00 |
2.00-2.50 |
2.00-3.00 |
Similar for pitting. |
|
Ni |
10.00-14.00 |
10.50-13.50 |
10.00-14.00 |
Balanced for austenite. |
|
Ti |
5x(C+N) min, 0.70 max |
5xC min, 0.70 max |
5xC min, 0.70 max |
Ti for stabilization; equivalent binding. |
|
N |
0.10 max |
- |
0.10 max |
Minor in AISI 316Ti. |
|
Fe |
Balance |
Balance |
Balance |
Base matrix. |
Mechanical Properties (Annealed Min)
|
Property |
AISI 316Ti |
EN 1.4571 |
JIS SUS316Ti |
Notes |
|---|---|---|---|---|
|
Tensile Strength (MPa) |
515 |
500-700 |
515 |
Equivalent range. |
|
Yield Strength (MPa) |
205 |
200 |
205 |
Similar for load. |
|
Elongation (%) |
40 |
40 |
40 |
Identical ductility. |
|
Hardness (HRB max) |
95 |
215 HB max (converted) |
95 |
Tunable. |
|
Impact (Charpy J) |
Not req. |
100 at RT |
Not req. |
Similar toughness. |
Corrosion: Both PREN 23-28; equivalents for IGC/high-temp.
Physical Properties: Identical for Equivalents
All equivalents share physical properties.
|
Property |
AISI 316Ti Value |
EN 1.4571 Value |
JIS SUS316Ti Value |
Notes |
|---|---|---|---|---|
|
Density (g/cm³) |
8.00 |
8.00 |
8.00 |
Identical. |
|
Thermal Conductivity (W/m·K at 100°C) |
14.6 |
15.0 |
14.6 |
Minor difference. |
|
Specific Heat (J/kg·K) |
500 |
500 |
500 |
Identical. |
|
Thermal Expansion (10^-6 /°C, 20-100°C) |
16.5 |
16.0 |
16.5 |
Low for all. |
This equivalence supports direct design swaps.
Corrosion Resistance: Equivalent Protection
All have PREN 23-28 for similar corrosion, with Ti preventing IGC.
- Pitting: CPT ~25°C.
- IGC: Resistant with Ti.
- SCC: Equivalent in chlorides.
- Uniform: <0.1 mm/year in acids.
Weldability and Fabrication: Equivalent Ease
All weld well; Ti eliminates annealing. Machinability ~60% for all.
Gangsteel's AISI 316Ti SA240 Type 316Ti matches equivalents.
Applications: Shared for Equivalents
All used in chemical reactors, marine fittings, power boilers—equivalence allows swaps.
In Gangsteel's supply to U.S. pharma, AISI 316Ti matched equivalents without issue.
Sourcing: Practical Advice
Gangsteel offers AISI 316Ti / equivalents at $3,200-3,800/ton FOB, 1-200mm thick. Dual certs save on testing; contact for quotes.
For A240 GR 316Ti, equivalence confirmed.
FAQ: 316Ti Stainless Steel AISI Equivalent Questions Answered
Q: What is the AISI equivalent for 316Ti stainless steel?
A: AISI 316Ti is the American designation, equivalent to EN/DIN 1.4571 (X6CrNiMoTi17-12-2), JIS SUS316Ti, BS 320S31, AFNOR Z6CNDT17-12, SS 2350, and GOST 08Ch17N13M2T—all with Ti stabilization.
Q: Is AISI 316Ti the same as 1.4571?
A: Yes, AISI 316Ti is equivalent to EN 1.4571, with identical chemistry and properties for direct substitution in European specs.
Q: What are the differences between AISI 316Ti and its equivalents?
A: Minor range variances (e.g., Ni in EN 1.4571 10.5-13.5% vs. 10-14% in AISI); fully equivalent for most apps.
Q: Can I substitute JIS SUS316Ti for AISI 316Ti?
A: Yes, JIS SUS316Ti is equivalent to AISI 316Ti, with matching chemistry and mechanicals for substitution.
Q: What standards cover AISI 316Ti equivalents?
A: Equivalents like EN 1.4571 under EN 10088-3; AISI 316Ti under ASTM A240—dual-cert for harmony.
Q: What is the density of AISI 316Ti and its equivalents?
A: Density 8.00 g/cm³ for AISI 316Ti and equivalents like 1.4571—identical for calcs.
Q: Where can I source AISI 316Ti or its equivalents?
A: Gangsteel stocks AISI 316Ti and equivalents at $3,200-3,800/ton FOB, 1-200mm thick. Dual certs available.
Q: Is AISI 316Ti equivalent to 316L or 321?
A: No—better than 316L in high-temp IGC, similar to 321 but with Mo for pitting; equivalents are Ti-stabilized like 1.4571.
-
BHW35 Steel Plate for Sale | RF
BHW35 / 13MnNiMo5-4 (DIWA 353 family): identity, chemistry, mechanical properties, related grades, and RFQ note
-
ASTM A516 Grade 70 Equivalent:
ASTM A516 Grade 70 equivalents include ASME SA516 Gr 70, EN 10028-2 P355GH and BS 1501 224-490. Gangsteel compa
-
What is the difference between
we supply high-quality A516 Gr 70 steel plate for pressure vessel applications and other standards like ASTM A2
-
P355GH AND S355J2 Steel Plates
EN10028-2 P355GH for High-Strength Low-Alloy Columbium-Vanadium Structural Steel EN10025-2 S355J2 Structural St
