Home > News >

ASTM A203 / A203M Grade B (ASME SA203 Grade B) is a nickel alloy steel pressure-vessel plate grade under ASTM A203/A203M; ASME SA203. This specification page covers grade identity, chemistry, mechanical requirements, related grades, and RFQ practice. Accept material against the ordered edition and the mill test certificate.

Grade Identity and Delivery Condition

ASTM A203 / A203M Grade B (ASME SA203 Grade B) is supplied for projects that name this designation on the purchase order or calculation sheet. Standard delivery condition is Normalized (Grades A/B/D/E); Grade F quenched and tempered per A203. Gangsteel supplies export plate and related products with EN 10204 documentation. Do not accept an alternate heat-treatment route unless a written concession changes the specification requirement.

Chemical Composition - Heat Analysis (ASTM A203 / A203M Grade B (ASME SA203 Grade B))

Heat analysis for Grade B. Product analysis Ni tolerances apply per A203/A203M. Modern editions list P/S 0.025 max. Same Ni band as Grade A; higher tensile class.

Element / ruleRequirement
C, max (t<=50 mm)0.21
C, max (50 < t <= 100 mm)0.24
C, max (t>100 mm)0.25
Mn, max (heat, t<=50 mm)0.70
Mn, max (heat, t>50 mm)0.80
P, max0.025
S, max0.025
Si (heat)0.15-0.40
Ni (heat)2.10-2.50

Mechanical Properties (ASTM A203 / A203M Grade B (ASME SA203 Grade B))

Confirm thickness, specimen orientation, and any supplementary impact, UT, or hardness requirements on the PO.

PropertyRequirement
Tensile strength70-90 ksi [485-620 MPa]
Yield strength, min40 ksi [275 MPa]
Elongation in 200 mm, min17%
Elongation in 50 mm, min21%
Delivery / HTPer A203/A203M for the ordered grade

Related / Near-Equivalent Grades

Near-equivalents are for cross-reference only. They are not automatic code substitutes. Substitution requires engineer approval and matching certificate scope.

SystemGradeNote
ASMESA203 Grade BASME twin
ASTMA203 sister gradesA/B = 2.25% Ni; D/E/F = 3.5% Ni family

Frequently Asked Questions

What is ASTM A203 / A203M Grade B (ASME SA203 Grade B)?

ASTM A203 / A203M Grade B (ASME SA203 Grade B) is a nickel alloy steel pressure-vessel plate under ASTM A203/A203M; ASME SA203. It is ordered when drawings or the calculation sheet name this designation specifically.

What chemical composition applies to ASTM A203 / A203M Grade B (ASME SA203 Grade B)?

Controlled elements and limits are tabulated above from the governing standard. Always verify the heat analysis on the MTC against the ordered edition.

What mechanical properties should buyers expect for ASTM A203 / A203M Grade B (ASME SA203 Grade B)?

Tensile, yield, elongation, and related limits are tabulated above. Design allowables must come from the applicable pressure-vessel or structural code, not from a web summary.

What delivery condition is required for ASTM A203 / A203M Grade B (ASME SA203 Grade B)?

Standard delivery is Normalized (Grades A/B/D/E); Grade F quenched and tempered per A203. State it explicitly on the PO. Do not accept an alternate route without a written concession.

How does ASTM A203 / A203M Grade B (ASME SA203 Grade B) differ from near-equivalent grades?

Near-equivalents may differ in carbon or alloy bands, tensile class, impact temperature, or heat treatment. Substitution needs engineering approval and matching certificate scope.

How do I RFQ ASTM A203 / A203M Grade B (ASME SA203 Grade B) from Gangsteel?

Send ASTM A203 / A203M Grade B (ASME SA203 Grade B), thickness x width x length, quantity or tonnage, delivery condition, optional impact/UT/Z tests, EN 10204 3.1 or 3.2, destination, and any dual-mark needs. Gangsteel replies with mill options, lead time, and packing notes.

Ordering and Mill Certificates

State grade ASTM A203 / A203M Grade B (ASME SA203 Grade B), dimensions, quantity, delivery condition, optional NDT/PMI, and certificate (EN 10204 3.1 standard; 3.2 when third-party inspection is ordered). Gangsteel supplies export plate and related products with mill test certificates. Contact Gangsteel for stock and mill production RFQs.

Other Products