Home > News >

ASTM A240 / ASME SA240 Type 304N (UNS S30451) is a nitrogen-strengthened austenitic stainless plate/sheet grade under ASTM A240/A240M; ASME SA240. This specification page covers grade identity, chemistry, mechanical requirements, related grades, and RFQ practice. Accept material against the ordered edition and the mill test certificate.

Grade Identity and Delivery Condition

ASTM A240 / ASME SA240 Type 304N is supplied for projects that name this designation on the purchase order or calculation sheet. Standard delivery condition is Solution annealed. Gangsteel supplies export plate and related products with EN 10204 documentation. Do not accept an alternate heat-treatment route unless a written concession changes the specification requirement.

Chemical Composition - Heat Analysis (ASTM A240 / ASME SA240 Type 304N)

Heat / cast analysis. Nitrogen floor raises strength vs Type 304. Confirm ordered A240/A240M edition on the MTC.

ElementMin %Max % / requirement
C-<=0.08
Mn-<=2.00
Si-<=0.75
P-<=0.045
S-<=0.030
Cr18.020.0
Ni8.010.5
N0.100.16

Mechanical Properties (ASTM A240 / ASME SA240 Type 304N)

Confirm thickness, specimen orientation, and any supplementary impact, UT, or hardness requirements on the PO.

PropertyRequirement
Tensile strength, min550 MPa (80 ksi)
Yield strength (0.2% offset), min240 MPa (35 ksi)
Elongation in 50 mm, min30%
Hardness, max217 HBW / 95 HRB
Delivery conditionSolution annealed

Related / Near-Equivalent Grades

Near-equivalents are for cross-reference only. They are not automatic code substitutes. Substitution requires engineer approval and matching certificate scope.

SystemGradeNote
ASMESA240 Type 304NASME twin
ASTMType 304 / 304LNBase / low-C nitrogen variants
UNSS30451304N designation
EN1.4311 family (approx.)Confirm edition - not automatic substitute

Frequently Asked Questions

What is ASTM A240 / ASME SA240 Type 304N?

ASTM A240 / ASME SA240 Type 304N (UNS S30451) is a nitrogen-strengthened austenitic stainless plate/sheet under ASTM A240/A240M; ASME SA240. It is ordered when drawings or the calculation sheet name this designation specifically.

What chemical composition applies to ASTM A240 / ASME SA240 Type 304N?

Controlled elements and limits are tabulated above from the governing standard. Always verify the heat analysis on the MTC against the ordered edition.

What mechanical properties should buyers expect for ASTM A240 / ASME SA240 Type 304N?

Tensile, yield, elongation, and related limits are tabulated above. Design allowables must come from the applicable pressure-vessel or structural code, not from a web summary.

What delivery condition is required for ASTM A240 / ASME SA240 Type 304N?

Standard delivery is Solution annealed. State it explicitly on the PO. Do not accept an alternate route without a written concession.

How does ASTM A240 / ASME SA240 Type 304N differ from near-equivalent grades?

Near-equivalents may differ in carbon or alloy bands, tensile class, impact temperature, or heat treatment. Substitution needs engineering approval and matching certificate scope.

How do I RFQ ASTM A240 / ASME SA240 Type 304N from Gangsteel?

Send ASTM A240 / ASME SA240 Type 304N (UNS S30451), thickness x width x length, quantity or tonnage, delivery condition, optional impact/UT/Z tests, EN 10204 3.1 or 3.2, destination, and any dual-mark needs. Gangsteel replies with mill options, lead time, and packing notes.

Ordering and Mill Certificates

State grade ASTM A240 / ASME SA240 Type 304N (UNS S30451), dimensions, quantity, delivery condition, optional NDT/PMI, and certificate (EN 10204 3.1 standard; 3.2 when third-party inspection is ordered). Gangsteel supplies export plate and related products with mill test certificates. Contact Gangsteel for stock and mill production RFQs.

Other Products