ASTM A240 / ASME SA240 Type 444 (UNS S44400) is a Mo-bearing ferritic stainless plate/sheet grade under ASTM A240/A240M; ASME SA240. This specification page covers grade identity, chemistry, mechanical requirements, related grades, and RFQ practice. Accept material against the ordered edition and the mill test certificate.
Grade Identity and Delivery Condition
ASTM A240 / ASME SA240 Type 444 is supplied for projects that name this designation on the purchase order or calculation sheet. Standard delivery condition is Annealed. Gangsteel supplies export plate and related products with EN 10204 documentation. Do not accept an alternate heat-treatment route unless a written concession changes the specification requirement.
Chemical Composition - Heat Analysis (ASTM A240 / ASME SA240 Type 444)
Heat / cast analysis. Stabilized ferritic with Mo for improved pitting vs 430. Stabilizer rule per A240 Table 1 - confirm edition.
| Element | Min % | Max % / requirement |
|---|---|---|
| C | - | <=0.025 |
| Mn | - | <=1.00 |
| Si | - | <=1.00 |
| P | - | <=0.040 |
| S | - | <=0.030 |
| Cr | 17.5 | 19.5 |
| Ni | - | <=1.00 |
| Mo | 1.75 | 2.50 |
| N | - | <=0.035 |
| Ti+Nb | 0.20+4(C+N) | 0.80 |
Mechanical Properties (ASTM A240 / ASME SA240 Type 444)
Confirm thickness, specimen orientation, and any supplementary impact, UT, or hardness requirements on the PO.
| Property | Requirement |
|---|---|
| Tensile strength, min | 415 MPa (60 ksi) |
| Yield strength (0.2% offset), min | 275 MPa (40 ksi) |
| Elongation in 50 mm, min | 20% |
| Hardness, max | 217 HBW / 96 HRB |
| Delivery condition | Annealed |
Related / Near-Equivalent Grades
Near-equivalents are for cross-reference only. They are not automatic code substitutes. Substitution requires engineer approval and matching certificate scope.
| System | Grade | Note |
|---|---|---|
| ASME | SA240 Type 444 | ASME twin |
| ASTM | Type 430 / 439 | Related ferritics |
| UNS | S44400 | 444 designation |
| EN | 1.4521 family | Confirm edition |
Frequently Asked Questions
What is ASTM A240 / ASME SA240 Type 444?
ASTM A240 / ASME SA240 Type 444 (UNS S44400) is a Mo-bearing ferritic stainless plate/sheet under ASTM A240/A240M; ASME SA240. It is ordered when drawings or the calculation sheet name this designation specifically.
What chemical composition applies to ASTM A240 / ASME SA240 Type 444?
Controlled elements and limits are tabulated above from the governing standard. Always verify the heat analysis on the MTC against the ordered edition.
What mechanical properties should buyers expect for ASTM A240 / ASME SA240 Type 444?
Tensile, yield, elongation, and related limits are tabulated above. Design allowables must come from the applicable pressure-vessel or structural code, not from a web summary.
What delivery condition is required for ASTM A240 / ASME SA240 Type 444?
Standard delivery is Annealed. State it explicitly on the PO. Do not accept an alternate route without a written concession.
How does ASTM A240 / ASME SA240 Type 444 differ from near-equivalent grades?
Near-equivalents may differ in carbon or alloy bands, tensile class, impact temperature, or heat treatment. Substitution needs engineering approval and matching certificate scope.
How do I RFQ ASTM A240 / ASME SA240 Type 444 from Gangsteel?
Send ASTM A240 / ASME SA240 Type 444 (UNS S44400), thickness x width x length, quantity or tonnage, delivery condition, optional impact/UT/Z tests, EN 10204 3.1 or 3.2, destination, and any dual-mark needs. Gangsteel replies with mill options, lead time, and packing notes.
Ordering and Mill Certificates
State grade ASTM A240 / ASME SA240 Type 444 (UNS S44400), dimensions, quantity, delivery condition, optional NDT/PMI, and certificate (EN 10204 3.1 standard; 3.2 when third-party inspection is ordered). Gangsteel supplies export plate and related products with mill test certificates. Contact Gangsteel for stock and mill production RFQs.
-
BHW35 Steel Plate for Sale | RF
BHW35 for sale: technical notes, chemistry and mechanical planning tables, applications and RFQ from Gangsteel.
-
ASTM A516 Grade 70 Equivalent:
ASTM A516 Grade 70 equivalents include ASME SA516 Gr 70, EN 10028-2 P355GH and BS 1501 224-490. Gangsteel compa
-
What is the difference between
we supply high-quality A516 Gr 70 steel plate for pressure vessel applications and other standards like ASTM A2
-
P355GH AND S355J2 Steel Plates
EN10028-2 P355GH for High-Strength Low-Alloy Columbium-Vanadium Structural Steel EN10025-2 S355J2 Structural St
