Product List
Gangsteel Material Solution
Email: admin@gangsteel.com
Sales: jack@gangsteel.com
A302GrD,A302 Gr.D,a302 Gr D,steel plate
A302GrD steel plates standard specification for pressure vessel plates in alloy steel, manganese molybdenum and manganese-molybdenum-nickel.
A302GrD steel plate shall be normally supplied in the as-rolled condition. Plates may be ordered normalized or stress relieved, or both. If A302GrD above 50mm in thickness shall be normalized .
Supplementary Technology: HIC Test | NACE MR0175 | Z15 | Z25 | Z35 |
Thickness: 6MM to 300MM,
Width: 1500mm to 4050mm,
Length: 3000mm to 15000mm
Gangsteelis specialized in supplying ASTM A302 steel plate in A302GrD. For more information of A302GrD steel plates, please check them in following:
|
A302GrD Chemical Composition |
|||||||
|
Carbon, max |
% |
Manganese, max |
% |
Silicon, max |
% |
Sulfur max |
% |
|
25mm or under |
0.2 |
Heat Analysis |
1.15-1.50 |
Heat Analysis |
0.15-0.40 |
All thick |
0.035 |
|
25-50mm |
0.23 |
Product Analysis |
1.07-1.62 |
Product Analysis |
0.13-0.45 |
||
|
over 50mm |
0.25 |
|
|
|
|
||
|
|
|
Molybdenum max |
% |
Nickel max |
% |
Phosphorus |
% |
|
|
|
Heat Analysis |
0.45-0.60 |
Heat Analysis |
0.70-1.00 |
All thick |
0.035 |
|
|
|
Product Analysis |
0.41-0.64 |
Product Analysis |
0.67-1.03 |
||
Carbon Equivalent: Ceq = 【C+Mn/6+(Cr+Mo+V)/5+(Ni+Cu)/15】%
|
Mechanical Property of A302GrD steel plate |
A302GrD |
|
Tensile strength, kis [MPa] |
80-100 [550-690] |
|
Yield strength, min, kis [MPa] |
50 [345] |
|
Elongation in 8 in. [200 mm], min, % |
17 |
|
Elongation in 2 in. [50 mm], min, % |
20 |
Shipbuilding steel plate| Alloy steel plates| High strength plate| Carbon steel plate| Stainless steel plate
If you need more stock steel plates in pressure vessel steel plate, please click warehouse sizes.
Related Grade: A302 Grade A | A302 Grade B| A302 Grade C
we supply high-quality A516 Gr 70 steel plate for pressure vessel applications and other standards like ASTM A2
EN10028-2 P355GH for High-Strength Low-Alloy Columbium-Vanadium Structural Steel EN10025-2 S355J2 Structural St
We export A240 304L Stainless Coil 2B, NO.1 No.4 surface, the thickness 0.1mm to 3mm, 3mm to 22mm, Mother mill
ASTM A516 GR 70 equivalent materials is such as ASME SA516 GR 70, EN 10028 P355GH, and BS1501 224-490 A & B, sh
