Home > News >

ASTM A633 / A633M Grade D is a normalized HSLA structural plate grade under ASTM A633/A633M. This specification page covers grade identity, chemistry, mechanical requirements, related grades, and RFQ practice. Accept material against the ordered edition and the mill test certificate.

Grade Identity and Delivery Condition

ASTM A633 / A633M Grade D is supplied for projects that name this designation on the purchase order or calculation sheet. Standard delivery condition is Normalized. Gangsteel supplies export plate and related products with EN 10204 documentation. Do not accept an alternate heat-treatment route unless a written concession changes the specification requirement.

Chemical Composition - Heat Analysis (ASTM A633 / A633M Grade D)

Heat analysis for Grade D. Residual Cu/Ni/Cr/Mo maxima per A633 Grade D table.

Element / ruleRequirement
C, max0.20
Mn (t<=40 mm)0.70-1.35
Mn (40 < t <= 100 mm)1.00-1.60
P, max0.030
S, max0.030
Si0.15-0.50
Cu, max0.35
Ni, max0.25
Cr, max0.25
Mo, max0.08

Mechanical Properties (ASTM A633 / A633M Grade D)

Confirm thickness, specimen orientation, and any supplementary impact, UT, or hardness requirements on the PO.

PropertyRequirement
Yield min (t<=65 mm)50 ksi [345 MPa]
Yield min (65 < t <= 100 mm)46 ksi [315 MPa]
Tensile (t<=65 mm)70-90 ksi [485-620 MPa]
Tensile (65 < t <= 100 mm)65-85 ksi [450-590 MPa]
Elongation in 200 mm, min18%
Elongation in 50 mm, min23%
DeliveryNormalized

Related / Near-Equivalent Grades

Near-equivalents are for cross-reference only. They are not automatic code substitutes. Substitution requires engineer approval and matching certificate scope.

SystemGradeNote
ASTMA633 Grade CSame tensile window; different chem (Nb)
ASTMA633 Grade EHigher strength V-bearing grade
ASTMA572 Grade 50 (approx.)As-rolled HSLA - not normalized A633
ENS355NL (approx.)Normalized fine-grain - confirm edition

Frequently Asked Questions

What is ASTM A633 / A633M Grade D?

ASTM A633 / A633M Grade D is a normalized HSLA structural plate under ASTM A633/A633M. It is ordered when drawings or the calculation sheet name this designation specifically.

What chemical composition applies to ASTM A633 / A633M Grade D?

Controlled elements and limits are tabulated above from the governing standard. Always verify the heat analysis on the MTC against the ordered edition.

What mechanical properties should buyers expect for ASTM A633 / A633M Grade D?

Tensile, yield, elongation, and related limits are tabulated above. Design allowables must come from the applicable pressure-vessel or structural code, not from a web summary.

What delivery condition is required for ASTM A633 / A633M Grade D?

Standard delivery is Normalized. State it explicitly on the PO. Do not accept an alternate route without a written concession.

How does ASTM A633 / A633M Grade D differ from near-equivalent grades?

Near-equivalents may differ in carbon or alloy bands, tensile class, impact temperature, or heat treatment. Substitution needs engineering approval and matching certificate scope.

How do I RFQ ASTM A633 / A633M Grade D from Gangsteel?

Send ASTM A633 / A633M Grade D, thickness x width x length, quantity or tonnage, delivery condition, optional impact/UT/Z tests, EN 10204 3.1 or 3.2, destination, and any dual-mark needs. Gangsteel replies with mill options, lead time, and packing notes.

Ordering and Mill Certificates

State grade ASTM A633 / A633M Grade D, dimensions, quantity, delivery condition, optional NDT/PMI, and certificate (EN 10204 3.1 standard; 3.2 when third-party inspection is ordered). Gangsteel supplies export plate and related products with mill test certificates. Contact Gangsteel for stock and mill production RFQs.

Other Products