Home > News >

AISI/SAE 1525 (UNS G15250) high-manganese carbon steel is a non-resulfurized high-manganese carbon steel grade under AISI 1525; UNS G15250; ASTM A29 chemistry practice for bar. This specification page covers grade identity, chemistry, mechanical requirements, related grades, and RFQ practice. Accept material against the ordered edition and the mill test certificate.

Grade Identity and Delivery Condition

AISI/SAE 1525 high-manganese carbon steel is supplied for projects that name this designation on the purchase order or calculation sheet. Standard delivery condition is As-rolled / annealed / cold-finished per order. Gangsteel supplies export plate and related products with EN 10204 documentation. Do not accept an alternate heat-treatment route unless a written concession changes the specification requirement.

Chemical Composition - Heat Analysis (AISI/SAE 1525 high-manganese carbon steel)

Standard AISI 1525 heat analysis. Si/Cu residuals follow the governing product spec.

Element / ruleRequirement
C0.23-0.29
Mn0.80-1.10
P, max0.040
S, max0.050

Mechanical Properties (AISI/SAE 1525 high-manganese carbon steel)

Confirm thickness, specimen orientation, and any supplementary impact, UT, or hardness requirements on the PO.

PropertyRequirement
Tensile Rm (typical as-delivered band)420-580 MPa
Yield (typical as-delivered band)240-380 MPa
Elongation (typical)22-32%
Hardness (typical)120-175 HB
NoteFinal properties depend on condition - use MTC

Related / Near-Equivalent Grades

Near-equivalents are for cross-reference only. They are not automatic code substitutes. Substitution requires engineer approval and matching certificate scope.

SystemGradeNote
UNSG15250Unified number
NearAISI 1522 / 1524 / 1526Adjacent Mn carbon grades

Frequently Asked Questions

What is AISI/SAE 1525 high-manganese carbon steel?

AISI/SAE 1525 (UNS G15250) high-manganese carbon steel is a non-resulfurized high-manganese carbon steel under AISI 1525; UNS G15250; ASTM A29 chemistry practice for bar. It is ordered when drawings or the calculation sheet name this designation specifically.

What chemical composition applies to AISI/SAE 1525 high-manganese carbon steel?

Controlled elements and limits are tabulated above from the governing standard. Always verify the heat analysis on the MTC against the ordered edition.

What mechanical properties should buyers expect for AISI/SAE 1525 high-manganese carbon steel?

Tensile, yield, elongation, and related limits are tabulated above. Design allowables must come from the applicable pressure-vessel or structural code, not from a web summary.

What delivery condition is required for AISI/SAE 1525 high-manganese carbon steel?

Standard delivery is As-rolled / annealed / cold-finished per order. State it explicitly on the PO. Do not accept an alternate route without a written concession.

How does AISI/SAE 1525 high-manganese carbon steel differ from near-equivalent grades?

Near-equivalents may differ in carbon or alloy bands, tensile class, impact temperature, or heat treatment. Substitution needs engineering approval and matching certificate scope.

How do I RFQ AISI/SAE 1525 high-manganese carbon steel from Gangsteel?

Send AISI/SAE 1525 (UNS G15250) high-manganese carbon steel, thickness x width x length, quantity or tonnage, delivery condition, optional impact/UT/Z tests, EN 10204 3.1 or 3.2, destination, and any dual-mark needs. Gangsteel replies with mill options, lead time, and packing notes.

Ordering and Mill Certificates

State grade AISI/SAE 1525 (UNS G15250) high-manganese carbon steel, dimensions, quantity, delivery condition, optional NDT/PMI, and certificate (EN 10204 3.1 standard; 3.2 when third-party inspection is ordered). Gangsteel supplies export plate and related products with mill test certificates. Contact Gangsteel for stock and mill production RFQs.

Other Products