Corten A (weathering steel; ASTM A242 Type 1 family) is a atmospheric-corrosion-resistant structural plate grade under Commercial Corten A / ASTM A242 Type 1 practice (confirm ordered ASTM/EN grade). This specification page covers grade identity, chemistry, mechanical requirements, related grades, and RFQ practice. Accept material against the ordered edition and the mill test certificate.
Grade Identity and Delivery Condition
Corten A (weathering steel; ASTM A242 Type 1 family) is supplied for projects that name this designation on the purchase order or calculation sheet. Standard delivery condition is As-rolled weathering plate. Gangsteel supplies export plate and related products with EN 10204 documentation. Do not accept an alternate heat-treatment route unless a written concession changes the specification requirement.
Chemical Composition - Heat Analysis (Corten A (weathering steel; ASTM A242 Type 1 family))
Commercial Corten A is commonly dual-referenced to ASTM A242 Type 1. Always confirm the ordered ASTM or EN 10025-5 grade on the contract/MTC - do not treat trade name alone as the design basis.
| Element / rule | Requirement |
|---|---|
| C, max | 0.12 |
| Si | 0.25-0.75 |
| Mn, max | 0.20-0.50 (A242 Type 1 practice) |
| P | 0.07-0.15 |
| S, max | 0.05 |
| Cu | 0.25-0.55 |
| Cr | 0.30-1.25 |
| Ni, max | 0.65 |
Mechanical Properties (Corten A (weathering steel; ASTM A242 Type 1 family))
Confirm thickness, specimen orientation, and any supplementary impact, UT, or hardness requirements on the PO.
| Property | Requirement |
|---|---|
| Yield min (t<=20 mm typical A242) | 50 ksi [345 MPa] |
| Tensile min (t<=20 mm typical A242) | 70 ksi [485 MPa] |
| Elongation in 200 mm, min (typical) | 18% |
| Delivery | As-rolled weathering plate |
Related / Near-Equivalent Grades
Near-equivalents are for cross-reference only. They are not automatic code substitutes. Substitution requires engineer approval and matching certificate scope.
| System | Grade | Note |
|---|---|---|
| ASTM | A242 Type 1 | Common specification mapping for Corten A |
| ASTM | A588 Grade A/B | Related weathering; different chem |
| EN 10025-5 | S355J0WP / S355J2WP | European weathering structural |
| Trade | Corten B | Often mapped toward A588 - not interchangeable by name alone |
Frequently Asked Questions
What is Corten A (weathering steel; ASTM A242 Type 1 family)?
Corten A (weathering steel; ASTM A242 Type 1 family) is a atmospheric-corrosion-resistant structural plate under Commercial Corten A / ASTM A242 Type 1 practice (confirm ordered ASTM/EN grade). It is ordered when drawings or the calculation sheet name this designation specifically.
What chemical composition applies to Corten A (weathering steel; ASTM A242 Type 1 family)?
Controlled elements and limits are tabulated above from the governing standard. Always verify the heat analysis on the MTC against the ordered edition.
What mechanical properties should buyers expect for Corten A (weathering steel; ASTM A242 Type 1 family)?
Tensile, yield, elongation, and related limits are tabulated above. Design allowables must come from the applicable pressure-vessel or structural code, not from a web summary.
What delivery condition is required for Corten A (weathering steel; ASTM A242 Type 1 family)?
Standard delivery is As-rolled weathering plate. State it explicitly on the PO. Do not accept an alternate route without a written concession.
How does Corten A (weathering steel; ASTM A242 Type 1 family) differ from near-equivalent grades?
Near-equivalents may differ in carbon or alloy bands, tensile class, impact temperature, or heat treatment. Substitution needs engineering approval and matching certificate scope.
How do I RFQ Corten A (weathering steel; ASTM A242 Type 1 family) from Gangsteel?
Send Corten A (weathering steel; ASTM A242 Type 1 family), thickness x width x length, quantity or tonnage, delivery condition, optional impact/UT/Z tests, EN 10204 3.1 or 3.2, destination, and any dual-mark needs. Gangsteel replies with mill options, lead time, and packing notes.
Ordering and Mill Certificates
State grade Corten A (weathering steel; ASTM A242 Type 1 family), dimensions, quantity, delivery condition, optional NDT/PMI, and certificate (EN 10204 3.1 standard; 3.2 when third-party inspection is ordered). Gangsteel supplies export plate and related products with mill test certificates. Contact Gangsteel for stock and mill production RFQs.
-
BHW35 Steel Plate for Sale | RF
BHW35 for sale: technical notes, chemistry and mechanical planning tables, applications and RFQ from Gangsteel.
-
ASTM A516 Grade 70 Equivalent:
ASTM A516 Grade 70 equivalents include ASME SA516 Gr 70, EN 10028-2 P355GH and BS 1501 224-490. Gangsteel compa
-
What is the difference between
we supply high-quality A516 Gr 70 steel plate for pressure vessel applications and other standards like ASTM A2
-
P355GH AND S355J2 Steel Plates
EN10028-2 P355GH for High-Strength Low-Alloy Columbium-Vanadium Structural Steel EN10025-2 S355J2 Structural St
