Home > News >

GL Grade A (IACS ordinary-strength hull steel) is a ordinary-strength shipbuilding plate grade under IACS UR W11 / GL (DNV GL / DNV continuity per contract). This specification page covers grade identity, chemistry, mechanical requirements, related grades, and RFQ practice. Accept material against the ordered edition and the mill test certificate.

Grade Identity and Delivery Condition

GL Grade A (IACS ordinary-strength hull steel) is supplied for projects that name this designation on the purchase order or calculation sheet. Standard delivery condition is As-rolled common for thin plate; N/CR/TM per thickness and approval. Gangsteel supplies export plate and related products with EN 10204 documentation. Do not accept an alternate heat-treatment route unless a written concession changes the specification requirement.

Chemical Composition - Heat Analysis (GL Grade A (IACS ordinary-strength hull steel))

Ladle / heat analysis rules for ordinary-strength Grade A. Confirm society rules edition on the contract.

Element / ruleRequirement
C, max0.21% (sections may allow 0.23%)
Mn, min2.5 x C
Si, max0.50%
P, max0.035%
S, max0.035%
C + Mn/6<=0.40%
Deoxidationt<=50 mm: any except rimmed; t>50 mm: killed

Mechanical Properties (GL Grade A (IACS ordinary-strength hull steel))

Confirm thickness, specimen orientation, and any supplementary impact, UT, or hardness requirements on the PO.

PropertyRequirement
Yield strength ReH, min235 MPa
Tensile strength Rm400-520 MPa
Elongation A5, min22%
ImpactGenerally not required for t<=50 mm; thicker plate per society rules (+20 deg C when required)
DeliveryAs-rolled common for thin plate; N/CR/TM per thickness and approval

Related / Near-Equivalent Grades

Near-equivalents are for cross-reference only. They are not automatic code substitutes. Substitution requires engineer approval and matching certificate scope.

SystemGradeNote
ABS / LR / BV / DNV / NKGrade A / A / A / A / KASame IACS ordinary-strength A band with society stamp
ASTMA131 Grade AUS ordinary-strength hull plate
GB 712Grade AChinese ship plate counterpart
EN 10025-2S235JR (approx.)Structural strength only - no class certificate
Next gradeGL Grade BImpact at 0 deg C

Frequently Asked Questions

What is GL Grade A (IACS ordinary-strength hull steel)?

GL Grade A (IACS ordinary-strength hull steel) is a ordinary-strength shipbuilding plate under IACS UR W11 / GL (DNV GL / DNV continuity per contract). It is ordered when drawings or the calculation sheet name this designation specifically.

What chemical composition applies to GL Grade A (IACS ordinary-strength hull steel)?

Controlled elements and limits are tabulated above from the governing standard. Always verify the heat analysis on the MTC against the ordered edition.

What mechanical properties should buyers expect for GL Grade A (IACS ordinary-strength hull steel)?

Tensile, yield, elongation, and related limits are tabulated above. Design allowables must come from the applicable pressure-vessel or structural code, not from a web summary.

What delivery condition is required for GL Grade A (IACS ordinary-strength hull steel)?

Standard delivery is As-rolled common for thin plate; N/CR/TM per thickness and approval. State it explicitly on the PO. Do not accept an alternate route without a written concession.

How does GL Grade A (IACS ordinary-strength hull steel) differ from near-equivalent grades?

Near-equivalents may differ in carbon or alloy bands, tensile class, impact temperature, or heat treatment. Substitution needs engineering approval and matching certificate scope.

How do I RFQ GL Grade A (IACS ordinary-strength hull steel) from Gangsteel?

Send GL Grade A (IACS ordinary-strength hull steel), thickness x width x length, quantity or tonnage, delivery condition, optional impact/UT/Z tests, EN 10204 3.1 or 3.2, destination, and any dual-mark needs. Gangsteel replies with mill options, lead time, and packing notes.

Ordering and Mill Certificates

State grade GL Grade A (IACS ordinary-strength hull steel), dimensions, quantity, delivery condition, optional NDT/PMI, and certificate (EN 10204 3.1 standard; 3.2 when third-party inspection is ordered). Gangsteel supplies export plate and related products with mill test certificates. Contact Gangsteel for stock and mill production RFQs.

Other Products