Home > News >

EN 10025-2 S355J2 (1.0577) - stock plate is a non-alloy structural steel plate (impact tested at -20 C) grade under EN 10025-2. This specification page covers grade identity, chemistry, mechanical requirements, related grades, and RFQ practice. Accept material against the ordered edition and the mill test certificate.

Grade Identity and Delivery Condition

EN 10025-2 S355J2 (1.0577) - stock plate is supplied for projects that name this designation on the purchase order or calculation sheet. Standard delivery condition is As-rolled / normalized as ordered; +N / +AR / +M per PO. Gangsteel supplies export plate and related products with EN 10204 documentation. Do not accept an alternate heat-treatment route unless a written concession changes the specification requirement.

Chemical Composition - Heat Analysis (EN 10025-2 S355J2 (1.0577) - stock plate)

Heat analysis per EN 10025-2 for S355J2. CEV and options (+N/+M/+AR, Z-quality) per purchase order. Stock listings still require MTC confirmation.

Element / ruleRequirement
C, max (t<=40 mm typical)0.24
Mn, max1.60
P, max0.035
S, max0.035
Cu, max0.55
N, max0.012
CEV, max (t<=40 mm typical)0.45

Mechanical Properties (EN 10025-2 S355J2 (1.0577) - stock plate)

Confirm thickness, specimen orientation, and any supplementary impact, UT, or hardness requirements on the PO.

PropertyRequirement
Yield ReH min (t<=16 mm)355 MPa
Yield ReH min (16 < t <= 40 mm)345 MPa
Tensile Rm (t<=100 mm typical)470-630 MPa
Elongation A, min22%
Charpy V-notch, min (longitudinal)27 J at -20 C (J2)
Delivery+AR / as ordered

Related / Near-Equivalent Grades

Near-equivalents are for cross-reference only. They are not automatic code substitutes. Substitution requires engineer approval and matching certificate scope.

SystemGradeNote
ENS355JR / S355J0 / S355K2Same strength family; different impact temperature/energy
ASTMA572 Gr50 / A709 Gr50 familyApproximate - confirm design code
GBQ355B/C/D familyApproximate Chinese structural grades

Frequently Asked Questions

What is EN 10025-2 S355J2 (1.0577) - stock plate?

EN 10025-2 S355J2 (1.0577) - stock plate is a non-alloy structural steel plate (impact tested at -20 C) under EN 10025-2. It is ordered when drawings or the calculation sheet name this designation specifically.

What chemical composition applies to EN 10025-2 S355J2 (1.0577) - stock plate?

Controlled elements and limits are tabulated above from the governing standard. Always verify the heat analysis on the MTC against the ordered edition.

What mechanical properties should buyers expect for EN 10025-2 S355J2 (1.0577) - stock plate?

Tensile, yield, elongation, and related limits are tabulated above. Design allowables must come from the applicable pressure-vessel or structural code, not from a web summary.

What delivery condition is required for EN 10025-2 S355J2 (1.0577) - stock plate?

Standard delivery is As-rolled / normalized as ordered; +N / +AR / +M per PO. State it explicitly on the PO. Do not accept an alternate route without a written concession.

How does EN 10025-2 S355J2 (1.0577) - stock plate differ from near-equivalent grades?

Near-equivalents may differ in carbon or alloy bands, tensile class, impact temperature, or heat treatment. Substitution needs engineering approval and matching certificate scope.

How do I RFQ EN 10025-2 S355J2 (1.0577) - stock plate from Gangsteel?

Send EN 10025-2 S355J2 (1.0577) - stock plate, thickness x width x length, quantity or tonnage, delivery condition, optional impact/UT/Z tests, EN 10204 3.1 or 3.2, destination, and any dual-mark needs. Gangsteel replies with mill options, lead time, and packing notes.

Ordering and Mill Certificates

State grade EN 10025-2 S355J2 (1.0577) - stock plate, dimensions, quantity, delivery condition, optional NDT/PMI, and certificate (EN 10204 3.1 standard; 3.2 when third-party inspection is ordered). Gangsteel supplies export plate and related products with mill test certificates. Contact Gangsteel for stock and mill production RFQs.

Other Products