WYJ024-2001 S43C(DI)
1. The technology conditions referenced JIS G 4051-1979 standard regulation, apply to is not more than 160 mm thick plate.
2. The size, shape, weight and allow deviation
The steel plate size and shape, weight and deviation should be allowed to meet the provisions of the GB709-88.
3. Technical requirements
3.1 the chemical composition of the steel plate (melting analysis) shall conform to the JIS G 4051-1979 standard regulation, see table 1.
Table 1
|
C |
Si |
Mn |
Ni |
Cr |
P |
S |
|
0.40~0.46 |
0.17~0.35 |
0.60~0.90 |
≤0.25 |
≤0.01~0.20 |
≤ 0.030 |
≤ 0.030 |
1.2 DI = 32 to 40 (target DI = 37), DI value calculation method for:
DI = Y * C ×Y * Mn ×Y * Si ×Y * Cr ×Y * Ni ×Y * Mo x 25.4
Note: coefficient by users with Y of the alloy content and Y CRT to search.
3.3 delivery status: is fire
3.4 mechanical properties: provide steel plate sample tensile test performance.
3.5 magnitude 5.0 degree of grain size of the frequency
3.6 surface quality should be consistent with the provisions of GB711-88 standard.
-
BHW35 Steel Plate for Sale | RF
BHW35 / 13MnNiMo5-4 (DIWA 353 family): identity, chemistry, mechanical properties, related grades, and RFQ note
-
ASTM A516 Grade 70 Equivalent:
ASTM A516 Grade 70 equivalents include ASME SA516 Gr 70, EN 10028-2 P355GH and BS 1501 224-490. Gangsteel compa
-
What is the difference between
we supply high-quality A516 Gr 70 steel plate for pressure vessel applications and other standards like ASTM A2
-
P355GH AND S355J2 Steel Plates
EN10028-2 P355GH for High-Strength Low-Alloy Columbium-Vanadium Structural Steel EN10025-2 S355J2 Structural St
