Home > News >

EN 10025-3 S460N (1.8901) - mechanical properties page is a normalized / normalized-rolled weldable fine-grain structural steel grade under EN 10025-3. This specification page covers grade identity, chemistry, mechanical requirements, related grades, and RFQ practice. Accept material against the ordered edition and the mill test certificate.

Grade Identity and Delivery Condition

EN 10025-3 S460N (1.8901) - mechanical properties page is supplied for projects that name this designation on the purchase order or calculation sheet. Standard delivery condition is Normalized or normalized rolled (+N). Gangsteel supplies export plate and related products with EN 10204 documentation. Do not accept an alternate heat-treatment route unless a written concession changes the specification requirement.

Chemical Composition - Heat Analysis (EN 10025-3 S460N (1.8901) - mechanical properties page)

Ladle analysis band for S460N. Confirm edition and thickness option on the MTC.

Element / ruleRequirement
C, max0.20
Si, max0.60
Mn1.00-1.70
P, max0.030
S, max0.025
Nb, max0.05
V, max0.20
Al total, min0.020
N, max0.025
CEV, max (t<=63 mm typical)0.48

Mechanical Properties (EN 10025-3 S460N (1.8901) - mechanical properties page)

Confirm thickness, specimen orientation, and any supplementary impact, UT, or hardness requirements on the PO.

PropertyRequirement
Yield ReH min (t<=16 mm)460 MPa
Yield ReH min (16 < t <= 40 mm)440 MPa
Tensile Rm (t<=100 mm typical)540-720 MPa
Elongation A, min17%
Impact-20 deg C
Delivery+N normalized / normalized rolled

Related / Near-Equivalent Grades

Near-equivalents are for cross-reference only. They are not automatic code substitutes. Substitution requires engineer approval and matching certificate scope.

SystemGradeNote
EN 10025-3S460NLColder impact (-50 deg C)
EN 10025-4S460M / MLTMCP route
ASTMA572 Grade 65 (approx.)Not identical

Frequently Asked Questions

What is EN 10025-3 S460N (1.8901) - mechanical properties page?

EN 10025-3 S460N (1.8901) - mechanical properties page is a normalized / normalized-rolled weldable fine-grain structural steel under EN 10025-3. It is ordered when drawings or the calculation sheet name this designation specifically.

What chemical composition applies to EN 10025-3 S460N (1.8901) - mechanical properties page?

Controlled elements and limits are tabulated above from the governing standard. Always verify the heat analysis on the MTC against the ordered edition.

What mechanical properties should buyers expect for EN 10025-3 S460N (1.8901) - mechanical properties page?

Tensile, yield, elongation, and related limits are tabulated above. Design allowables must come from the applicable pressure-vessel or structural code, not from a web summary.

What delivery condition is required for EN 10025-3 S460N (1.8901) - mechanical properties page?

Standard delivery is Normalized or normalized rolled (+N). State it explicitly on the PO. Do not accept an alternate route without a written concession.

How does EN 10025-3 S460N (1.8901) - mechanical properties page differ from near-equivalent grades?

Near-equivalents may differ in carbon or alloy bands, tensile class, impact temperature, or heat treatment. Substitution needs engineering approval and matching certificate scope.

How do I RFQ EN 10025-3 S460N (1.8901) - mechanical properties page from Gangsteel?

Send EN 10025-3 S460N (1.8901) - mechanical properties page, thickness x width x length, quantity or tonnage, delivery condition, optional impact/UT/Z tests, EN 10204 3.1 or 3.2, destination, and any dual-mark needs. Gangsteel replies with mill options, lead time, and packing notes.

Ordering and Mill Certificates

State grade EN 10025-3 S460N (1.8901) - mechanical properties page, dimensions, quantity, delivery condition, optional NDT/PMI, and certificate (EN 10204 3.1 standard; 3.2 when third-party inspection is ordered). Gangsteel supplies export plate and related products with mill test certificates. Contact Gangsteel for stock and mill production RFQs.

Other Products