News
SA299
WYJ014-2005 SA299
1, the technology conditions of the ASME SA299 / SA299M equivalent to the latest version, suitable for welding boiler and other pressure vessel USES the steel plate.
2, the steel plate size and shape, weight and deviation should be allowed to meet the provisions of SA20 standard.
3, technical requirements
3.1 chemical composition
The chemical composition of the steel plate (melting analysis) shall conform to the provisions of ASME SA299 steel plate, see table 1.
Table 1 wt%
|
composition |
C |
Si |
Mn |
P |
S |
Ni |
Cr |
Mo |
Nb |
Cu |
Al |
|
Melting analysis |
≤0.28 |
0.15 ~0.40 |
0.90~1.50 |
≤0.020 |
≤0.010 |
≤0.25 |
≤0.25 |
≤0.10 |
≤0.02 |
≤0.25 |
≥0.020 |
|
Produce analysis |
≤0.28 |
0.13~0.45 |
0.84~1.62 |
≤0.025 |
≤0.015 |
≤0.25 |
≤0.25 |
≤0.11 |
≤0.03 |
≤0.25 |
≥0.020 |
Note :Ni+Cr+Mo+Cu+V+Nb≤0.80%。
3.2 delivery status: the steel plate to normalizedstate delivery. Sample simulation after welding heat treatment system: 610 ±5 ℃, heat preservation 8 hours, more than 300 ℃,≤150 ℃cooling speed/h, 300 ℃below are not limit. PWHT size simulation for: long quartile 3 T x width quartile 3 T ×T (T-thickness).
3.3 mechanics and process performance
3.3.1 PWHT should comply with the provisions of the table 2.
table2
|
thick (mm) |
σs (Mpa) |
σb (Mpa) |
δ5gauge length 50mm(%) |
0℃impact
J |
180° cold bend
|
|
8-25 |
≥290 |
515~655 |
≥19 |
≥27 |
d=4a |
|
≥25 |
≥275 |
Note: (1) the table 2 impact energy for three samples of the arithmetic mean, allow one of the single value less than 27 J, but shall not be less than 20 J.
(2) less than 12 mm thickness of steel, do not do the impact test.
3.3.2normalizeddelivery the tensile properties of high temperature steel plate to table 3.
Table 3
|
Test temperature℃ |
σ0.2 Mpa |
σb Mpa |
|
350 |
≥205 |
≥480 |
-
BHW35 Steel Plate for Sale | RF
BHW35 / 13MnNiMo5-4 (DIWA 353 family): identity, chemistry, mechanical properties, related grades, and RFQ note
-
ASTM A516 Grade 70 Equivalent:
ASTM A516 Grade 70 equivalents include ASME SA516 Gr 70, EN 10028-2 P355GH and BS 1501 224-490. Gangsteel compa
-
What is the difference between
we supply high-quality A516 Gr 70 steel plate for pressure vessel applications and other standards like ASTM A2
-
P355GH AND S355J2 Steel Plates
EN10028-2 P355GH for High-Strength Low-Alloy Columbium-Vanadium Structural Steel EN10025-2 S355J2 Structural St
