Home > News >

ASME SA387 / ASTM A387 Grade 11 Class 2 is a 1.25Cr-0.5Mo pressure-vessel plate grade under ASTM A387/A387M; ASME SA387. This specification page covers grade identity, chemistry, mechanical requirements, related grades, and RFQ practice. Accept material against the ordered edition and the mill test certificate.

Grade Identity and Delivery Condition

ASME SA387 / ASTM A387 Grade 11 Class 2 is supplied for projects that name this designation on the purchase order or calculation sheet. Standard delivery condition is Per A387/SA387; Grade 11 tempering generally >=620 deg C. Gangsteel supplies export plate and related products with EN 10204 documentation. Do not accept an alternate heat-treatment route unless a written concession changes the specification requirement.

Chemical Composition - Heat Analysis (ASME SA387 / ASTM A387 Grade 11 Class 2)

Heat analysis for Grade 11. Product analysis tolerances apply per A387/SA387.

Element / ruleRequirement
C0.05 to 0.17
Mn0.40 to 0.65
P<=0.025
S<=0.025
Si0.50 to 0.80
Cr1.00 to 1.50
Mo0.45 to 0.65

Mechanical Properties (ASME SA387 / ASTM A387 Grade 11 Class 2)

Confirm thickness, specimen orientation, and any supplementary impact, UT, or hardness requirements on the PO.

PropertyRequirement
Tensile strength75 to 100 ksi [515 to 690 MPa]
Yield strength, min45 ksi [310 MPa]
Elongation in 50 mm, min22%
Elongation in 200 mm, min18%
Delivery / HTPer A387/SA387; Grade 11 tempering generally >=620 deg C

Related / Near-Equivalent Grades

Near-equivalents are for cross-reference only. They are not automatic code substitutes. Substitution requires engineer approval and matching certificate scope.

SystemGradeNote
ASTMA387 Grade 11 Class 2Base ASTM product form
ASMESA387 Grade 11 Class 2ASME twin used on Section VIII vessels
ASTM / ASMEA387 / SA387 Grade 11 Class 1Same chemistry family, lower tensile class
EN 10028-213CrMoSi5-5 (approx.)1.25Cr-Mo-Si European pressure family - confirm edition
ASTMA387 Grade 12 / 22 Class 2Related Cr-Mo; different Cr/Mo band - not interchangeable

Frequently Asked Questions

What is ASME SA387 / ASTM A387 Grade 11 Class 2?

ASME SA387 / ASTM A387 Grade 11 Class 2 is a 1.25Cr-0.5Mo pressure-vessel plate under ASTM A387/A387M; ASME SA387. It is ordered when drawings or the calculation sheet name this designation specifically.

What chemical composition applies to ASME SA387 / ASTM A387 Grade 11 Class 2?

Controlled elements and limits are tabulated above from the governing standard. Always verify the heat analysis on the MTC against the ordered edition.

What mechanical properties should buyers expect for ASME SA387 / ASTM A387 Grade 11 Class 2?

Tensile, yield, elongation, and related limits are tabulated above. Design allowables must come from the applicable pressure-vessel or structural code, not from a web summary.

What delivery condition is required for ASME SA387 / ASTM A387 Grade 11 Class 2?

Standard delivery is Per A387/SA387; Grade 11 tempering generally >=620 deg C. State it explicitly on the PO. Do not accept an alternate route without a written concession.

How does ASME SA387 / ASTM A387 Grade 11 Class 2 differ from near-equivalent grades?

Near-equivalents may differ in carbon or alloy bands, tensile class, impact temperature, or heat treatment. Substitution needs engineering approval and matching certificate scope.

How do I RFQ ASME SA387 / ASTM A387 Grade 11 Class 2 from Gangsteel?

Send ASME SA387 / ASTM A387 Grade 11 Class 2, thickness x width x length, quantity or tonnage, delivery condition, optional impact/UT/Z tests, EN 10204 3.1 or 3.2, destination, and any dual-mark needs. Gangsteel replies with mill options, lead time, and packing notes.

Ordering and Mill Certificates

State grade ASME SA387 / ASTM A387 Grade 11 Class 2, dimensions, quantity, delivery condition, optional NDT/PMI, and certificate (EN 10204 3.1 standard; 3.2 when third-party inspection is ordered). Gangsteel supplies export plate and related products with mill test certificates. Contact Gangsteel for stock and mill production RFQs.

Other Products