S420N Mechanical Properties
As a premier exporter and manufacturer of high-quality structural steel plates, Gangsteel specializes in producing EN 10025-3 S420N steel.
The S420N mechanical properties are optimized for high-strength welded structures with 420 MPa minimum yield and 40 J impact at -20°C.
Our S420N plates are delivered in normalized (+N) condition.
S420N Mechanical Properties (Normalized, Min Values)
|
Thickness (mm) |
Yield Strength ReH (MPa) |
Tensile Strength Rm (MPa) |
Elongation A (%) |
Charpy V-Notch Longitudinal (J) |
Transverse (J) |
|---|---|---|---|---|---|
|
≤ 16 |
420 |
520–680 |
19 |
40 at -20°C |
27 |
|
16 < t ≤ 40 |
400 |
520–680 |
19 |
40 at -20°C |
27 |
|
40 < t ≤ 63 |
390 |
520–680 |
19 |
40 at -20°C |
27 |
|
63 < t ≤ 80 |
380 |
520–680 |
18 |
40 at -20°C |
27 |
|
80 < t ≤ 100 |
370 |
520–680 |
18 |
40 at -20°C |
27 |
|
100 < t ≤ 200 |
360 |
500–650 |
18 |
40 at -20°C |
27 |
|
200 < t ≤ 250 |
340 |
500–650 |
18 |
40 at -20°C |
27 |
Elongation based on Lo = 5.65 √So. Test direction: transverse unless specified.
Key Mechanical Highlights
- Yield Strength: 420 MPa (≤16 mm) → 340 MPa (200–250 mm)
- Tensile Strength: 520–680 MPa (≤100 mm), 500–650 MPa (>100 mm)
- Elongation: 19% (≤63 mm), 18% (>63 mm)
- Impact Toughness: 40 J longitudinal / 27 J transverse at -20°C
Fine-grain normalized structureensures high ductility and crack resistance.
Why Gangsteel for S420N?
- Mill-Direct Supply
- Full Certification– EN 10204 3.1
- Stock– 6–250 mm
Contact: admin@gangsteel.comProduct Page: en 10025 3 s420n normalized structural steel plate
-
BHW35 Steel Plate for Sale | RF
BHW35 / 13MnNiMo5-4 (DIWA 353 family): identity, chemistry, mechanical properties, related grades, and RFQ note
-
ASTM A516 Grade 70 Equivalent:
ASTM A516 Grade 70 equivalents include ASME SA516 Gr 70, EN 10028-2 P355GH and BS 1501 224-490. Gangsteel compa
-
What is the difference between
we supply high-quality A516 Gr 70 steel plate for pressure vessel applications and other standards like ASTM A2
-
P355GH AND S355J2 Steel Plates
EN10028-2 P355GH for High-Strength Low-Alloy Columbium-Vanadium Structural Steel EN10025-2 S355J2 Structural St
