ASTM A240 / ASME SA240 duplex 2304 (UNS S32304 / EN 1.4362) is a lean duplex stainless steel plate/sheet grade under ASTM A240/A240M; ASME SA240; EN 10028-7 1.4362. This specification page covers grade identity, chemistry, mechanical requirements, related grades, and RFQ practice. Accept material against the ordered edition and the mill test certificate.

Grade Identity and Delivery Condition

ASTM A240 / ASME SA240 duplex 2304 is supplied for projects that name this designation on the purchase order or calculation sheet. Standard delivery condition is Solution annealed. Gangsteel supplies export plate and related products with EN 10204 documentation. Do not accept an alternate heat-treatment route unless a written concession changes the specification requirement.

Chemical Composition - Heat Analysis (ASTM A240 / ASME SA240 duplex 2304)

Heat/cast analysis for UNS S32304 (2304). EN 1.4362 windows are similar but not identical (e.g. Mn max 2.00 in EN) - confirm ordered book on MTC.

ElementMin %Max % / requirement
C-<=0.030
Mn-<=2.50
Si-<=1.00
P-<=0.040
S-<=0.030
Cr21.524.5
Ni3.05.5
Mo0.050.60
N0.050.20
Cu0.050.60

Mechanical Properties (ASTM A240 / ASME SA240 duplex 2304)

Confirm thickness, specimen orientation, and any supplementary impact, UT, or hardness requirements on the PO.

PropertyRequirement
Tensile strength, min (A240 annealed)600 MPa (87 ksi)
Yield strength (0.2% offset), min400 MPa (58 ksi)
Elongation in 50 mm, min25%
Hardness, max290 HBW / 32 HRC
DeliverySolution annealed

Related / Near-Equivalent Grades

Near-equivalents are for cross-reference only. They are not automatic code substitutes. Substitution requires engineer approval and matching certificate scope.

SystemGradeNote
UNSS323042304 designation
EN1.4362 / X2CrNiN23-4European lean duplex
ASTMS32205 (2205)Higher Mo duplex sister - not substitute

Frequently Asked Questions

What is ASTM A240 / ASME SA240 duplex 2304?

ASTM A240 / ASME SA240 duplex 2304 (UNS S32304 / EN 1.4362) is a lean duplex stainless steel plate/sheet under ASTM A240/A240M; ASME SA240; EN 10028-7 1.4362. It is ordered when drawings or the calculation sheet name this designation specifically.

What chemical composition applies to ASTM A240 / ASME SA240 duplex 2304?

Controlled elements and limits are tabulated above from the governing standard. Always verify the heat analysis on the MTC against the ordered edition.

What mechanical properties should buyers expect for ASTM A240 / ASME SA240 duplex 2304?

Tensile, yield, elongation, and related limits are tabulated above. Design allowables must come from the applicable pressure-vessel or structural code, not from a web summary.

What delivery condition is required for ASTM A240 / ASME SA240 duplex 2304?

Standard delivery is Solution annealed. State it explicitly on the PO. Do not accept an alternate route without a written concession.

How does ASTM A240 / ASME SA240 duplex 2304 differ from near-equivalent grades?

Near-equivalents may differ in carbon or alloy bands, tensile class, impact temperature, or heat treatment. Substitution needs engineering approval and matching certificate scope.

How do I RFQ ASTM A240 / ASME SA240 duplex 2304 from Gangsteel?

Send ASTM A240 / ASME SA240 duplex 2304 (UNS S32304 / EN 1.4362), thickness x width x length, quantity or tonnage, delivery condition, optional impact/UT/Z tests, EN 10204 3.1 or 3.2, destination, and any dual-mark needs. Gangsteel replies with mill options, lead time, and packing notes.

Ordering and Mill Certificates

State grade ASTM A240 / ASME SA240 duplex 2304 (UNS S32304 / EN 1.4362), dimensions, quantity, delivery condition, optional NDT/PMI, and certificate (EN 10204 3.1 standard; 3.2 when third-party inspection is ordered). Gangsteel supplies export plate and related products with mill test certificates. Contact Gangsteel for stock and mill production RFQs.

Other Products