Product List
Gangsteel Material Solution
Email: admin@gangsteel.com
Sales: jack@gangsteel.com
1. Applicable scope
The technology conditions apply to hydrogenation equipment using 12 Cr2Mo1R (H) thick plate developed.
2. The steel plate size and shape, weight, allow deviation and surface quality should be consistent with the provisions of GB6654 standard.
3. Chemical composition
The chemical composition of the steel plate should comply with the provisions of the table 1.
Table 1
|
composition |
C |
Si |
Mn |
P |
S |
Cr |
Mo |
Ni |
Cu |
Sb* |
|
Heat analysis |
≤0.15 |
≤0.10 |
0.30－0.60 |
≤0.010 |
≤0.010 |
2.00－2.50 |
0.90－1.10 |
≤0.20 |
≤0.20 |
≤0.003 |
|
Product analysis |
≤0.17 |
≤0.10 |
0.27－0.63 |
≤0.010 |
≤0.010 |
1.95－2.60 |
0.87－1.13 |
≤0.20 |
≤0.20 |
≤0.003 |
|
Sn* |
As* |
「H」* |
O |
N |
|
≤0.015 |
≤0.016 |
≤0.0002 |
≤0.003 |
≤0.008 |
|
≤0.015 |
≤0.016 |
≤0.0002 |
≤0.002 |
≤0.008 |
note：Tempering sensitivity modulus should meet the following embrittlement requirements：
J=(Si_Mn)(P+Sn)×104≤100（％）
（P＋Sn）≤0.014
Element in the formula should replaced by percentage content。
4. Delivery status: the steel plate to normalizing + tempering state delivery.
5. Mechanical properties
The mechanical properties of the steel plate should be in accordance with table 2 and the provisions of the table 3 (sample for simulation of heat treatment after state)
Table 2
|
Rm(MPa) |
RP0.2(MPa) |
A(%) |
Z(%) |
cold bend inspection B=2a |
-30℃charpy impact test energy ，J |
|
515-690 |
≥310 |
≥18 |
≥45 |
D=3a Bend 180°no cracking |
≥54 average value ≥47single value |
Table 3
|
temperature （℃） |
20 |
100 |
150 |
200 |
250 |
300 |
325 |
350 |
375 |
400 |
425 |
450 |
475 |
500 |
525 |
|
RP0.2(MPa) |
≥310 |
≥282 |
≥271 |
≥263 |
≥258 |
≥253 |
≥251 |
≥248 |
≥245 |
≥241 |
≥237 |
≥232 |
≥225 |
≥218 |
≥210 |
|
Rm(MPa) |
≥515 |
≥515 |
≥503 |
≥498 |
≥496 |
≥494 |
≥491 |
≥487 |
≥482 |
≥475 |
≥466 |
≥455 |
≥439 |
≥421 |
≥396 |
EN10028-2 P355GH for High-Strength Low-Alloy Columbium-Vanadium Structural Steel EN10025-2 S355J2 Structural St
We export A240 304L Stainless Coil 2B, NO.1 No.4 surface, the thickness 0.1mm to 3mm, 3mm to 22mm, Mother mill
ASTM A516 GR 70 equivalent materials is such as ASME SA516 GR 70, EN 10028 P355GH, and BS1501 224-490 A & B, sh
The astm a516 gr 70 yield strength of 260 MPa ensures structural integrity in high-pressure applications, such
