316Ti Stainless Steel SS 316Ti 1.4571 DIN

316Ti Stainless Steel SS 316Ti 1.4571 DIN

Published: November 12, 2025 | Updated: November 12, 2025By Gangsteel Engineering Team – 25+ Years in Stainless Steel Export Excellence

In the global stainless steel market compliant with ASTM A240/A240M and ASME SA240/SA240M standards, 316Ti stainless steel, also known as SS 316Ti under Swedish SS 2350 and DIN 1.4571 (X6CrNiMoTi17-12-2), is a titanium-stabilized austenitic grade renowned for its superior intergranular corrosion (IGC) resistance in high-temperature and welded applications.

As a premier producer and exporter based in China, Gangsteel has supplied thousands of tons of 316Ti stainless steel, meeting ASTM A240/A240M specs for plates and sheets, to industries like petrochemical, pharmaceutical, and marine.

If you're cross-referencing 316Ti, SS 316Ti, and DIN 1.4571 under ASME SA240/SA240M for a welded reactor or heat exchanger where dual certification and performance are key, this guide provides a comprehensive comparison. We'll explore their equivalence, properties, and insights, based on ASTM A240/A240M, EN 10088-2/EN 10095, and ASME SA240/SA240M standards and our mill data.

From our production lines, we've facilitated seamless use of 316Ti, SS 316Ti, and DIN 1.4571: In a 2024 Swedish chemical project, our 316Ti plates under ASTM A240 /A240M matched SS 2350 and DIN 1.4571 properties for traceability, allowing direct substitution without re-certification, saving 15% on compliance as per client reports. Compliant with ASME SA240/SA240M for pressure apps, all have density 8.00 g/cm³. Let's delve into 316Ti, SS 316Ti, and DIN 1.4571, from composition to applications, to guide your global sourcing.

Summary

316Ti stainless steel, SS 316Ti (SS 2350), and DIN 1.4571 (X6CrNiMoTi17-12-2) under ASTM A240/A240M, EN 10088-2/EN 10095, and ASME SA240/SA240M are fully equivalent titanium-stabilized austenitic grades, sharing identical chemistry (C 0.08% max, Cr 16-18%, Mo 2-3%, Ni 10-14%, Ti 0.70% max), mechanicals (tensile 515 MPa min, yield 205 MPa min), and PREN 23-28 for IGC resistance at 425-815°C. Density 8.00 g/cm³, minor spec range variances (e.g., Ni 10.5-13.5% in DIN 1.4571) don't affect performance. Gangsteel offers triple-cert stock for seamless EU/Swedish/US use.

Chemical Composition: Identical Across Designations

The chemical composition of 316Ti, SS 316Ti (SS 2350), and DIN 1.4571 is harmonized for full interchangeability, with minor range differences.

Chemically identical for all practical purposes; Gangsteel's triple-cert stock meets all.

Mechanical Properties: Equivalent Performance

All designations have identical minimum mechanicals per their standards.

High-temp retention identical due to Ti.

Physical Properties: Identical Equivalence

Full physical equivalence.

Corrosion Resistance: Equivalent Protection

All have PREN 23-28, IGC resistance with Ti.

• Pitting: CPT ~25°C.
• IGC: Resistant per A262 / ISO 3651-2.
• SCC: Equivalent in chlorides.
• Uniform: <0.1 mm/year in acids.

Identical performance.

Weldability and Fabrication: Equivalent Ease

All weld without preheat; Ti eliminates PWHT. Machinability ~60%.

Gangsteel's 316Ti SA240 Type 316Ti matches equivalents.

Applications: Shared Globally

All used in chemical reactors, marine fittings, power boilers—equivalence allows swaps.

In Gangsteel's supply to EU/US, 316Ti, SS 316Ti, and DIN 1.4571 matched without issue.

Sourcing: Triple-Cert Advantage

Gangsteel offers 316Ti / SS 316Ti / DIN 1.4571 at $3,200-3,800/ton FOB, 1-200mm thick. Triple certs save testing; contact for quotes.

For A240 GR 316Ti, equivalence confirmed.

FAQ: 316Ti SS 316Ti 1.4571 DIN Questions Answered

Q: Is SS 316Ti the same as DIN 1.4571 and 316Ti?

A: Yes, SS 316Ti (SS 2350), DIN 1.4571, and 316Ti (UNS S31635) are equivalent titanium-stabilized austenitic grades with identical chemistry and properties for full substitution.

Q: What is the chemical difference between SS 316Ti and DIN 1.4571?

A: No significant difference; both have C 0.08% max, Cr 16-18%, Mo 2-3%, Ni 10-14%, Ti 0.70% max. DIN has slightly narrower Ni/Mo ranges but fully overlapping.

Q: Are mechanical properties the same for SS 316Ti and DIN 1.4571?

A: Yes, all have tensile 515 MPa min, yield 205 MPa min, elongation 40% min per respective standards.

Q: Can I use SS 316Ti instead of DIN 1.4571?

A: Yes, SS 316Ti is fully interchangeable with DIN 1.4571; Gangsteel's triple-cert stock ensures compliance with Swedish, German, and ASTM specs.

Q: What standards apply to SS 316Ti and DIN 1.4571?

A: SS 316Ti under Swedish SS 2350; DIN 1.4571 under EN 10088-2/EN 10095—both harmonized with ASTM A240 for global use.

Q: What is the density of SS 316Ti vs DIN 1.4571?

A: Identical density 8.00 g/cm³ for SS 316Ti and DIN 1.4571.

Q: Where to buy triple-cert SS 316Ti / DIN 1.4571 / 316Ti?

A: Gangsteel stocks triple-cert SS 316Ti / DIN 1.4571 / 316Ti at $3,200-3,800/ton FOB, 1-200mm thick. Contact for certs.