WYJ052-2000                 45Mn2V

1, Applicable scope:this technical agreement applicable to not more than 40 mm thickness of Mn2V 45 steel plate.

2, size, shape, weight and allow deviation

2.1 thickness dimension tolerance:-0.5-+ 0.6 mm, try to control lower limit

2.2 steel plate to the rest of the size, shape, weight deviation should be allowed to meet the provisions of the GB709-88 standard.

3. Technical requirements

3.1 the chemical composition of the steel plate (melting analysis) should comply with the provisions of the table. Wi %

3.3 delivery status: the hot rolling

3.4 mechanical performance: provide measured value ofhardness HB.

3.5 provide the mechanical properties of the samples (σb, ψ, the delta s)

3.6 standard and quality should comply with the regulations of the GB3274-88 standard.