ASTM A204 / A204M Grade A (ASME SA204 Grade A) is a C-0.5Mo molybdenum alloy pressure-vessel plate grade under ASTM A204/A204M; ASME SA204. This specification page covers grade identity, chemistry, mechanical requirements, related grades, and RFQ practice. Accept material against the ordered edition and the mill test certificate.
Grade Identity and Delivery Condition
ASTM A204 / A204M Grade A (ASME SA204 Grade A) is supplied for projects that name this designation on the purchase order or calculation sheet. Standard delivery condition is As required by order / A20; commonly normalized for vessel service. Gangsteel supplies export plate and related products with EN 10204 documentation. Do not accept an alternate heat-treatment route unless a written concession changes the specification requirement.
Chemical Composition - Heat Analysis (ASTM A204 / A204M Grade A (ASME SA204 Grade A))
Heat analysis for Grade A. Modern ASME editions may tighten P/S to 0.025 - confirm ordered edition on the MTC.
| Element / rule | Requirement |
|---|---|
| C, max (t<=25 mm) | 0.18 |
| C, max (25 < t <= 50 mm) | 0.21 |
| C, max (50 < t <= 100 mm) | 0.23 |
| C, max (t>100 mm) | 0.25 |
| Mn, max (heat) | 0.90 |
| Mn, max (product) | 0.98 |
| P, max | 0.035 |
| S, max | 0.035 |
| Si (heat) | 0.15-0.40 |
| Mo (heat) | 0.45-0.60 |
Mechanical Properties (ASTM A204 / A204M Grade A (ASME SA204 Grade A))
Confirm thickness, specimen orientation, and any supplementary impact, UT, or hardness requirements on the PO.
| Property | Requirement |
|---|---|
| Tensile strength | 65-85 ksi [450-585 MPa] |
| Yield strength, min | 37 ksi [255 MPa] |
| Elongation in 200 mm, min | 19% |
| Elongation in 50 mm, min | 23% |
| Delivery | Per order / A20; killed steel |
Related / Near-Equivalent Grades
Near-equivalents are for cross-reference only. They are not automatic code substitutes. Substitution requires engineer approval and matching certificate scope.
| System | Grade | Note |
|---|---|---|
| ASME | SA204 Grade A | ASME twin |
| ASTM | A204 Grade B / C | Same Mo band, higher tensile |
| EN 10028-2 | 16Mo3 (approx.) | 0.3Mo European - not identical |
| Related | A387 Grade 12 / 11 | Cr-Mo elevated-temperature plates - different alloy |
Frequently Asked Questions
What is ASTM A204 / A204M Grade A (ASME SA204 Grade A)?
ASTM A204 / A204M Grade A (ASME SA204 Grade A) is a C-0.5Mo molybdenum alloy pressure-vessel plate under ASTM A204/A204M; ASME SA204. It is ordered when drawings or the calculation sheet name this designation specifically.
What chemical composition applies to ASTM A204 / A204M Grade A (ASME SA204 Grade A)?
Controlled elements and limits are tabulated above from the governing standard. Always verify the heat analysis on the MTC against the ordered edition.
What mechanical properties should buyers expect for ASTM A204 / A204M Grade A (ASME SA204 Grade A)?
Tensile, yield, elongation, and related limits are tabulated above. Design allowables must come from the applicable pressure-vessel or structural code, not from a web summary.
What delivery condition is required for ASTM A204 / A204M Grade A (ASME SA204 Grade A)?
Standard delivery is As required by order / A20; commonly normalized for vessel service. State it explicitly on the PO. Do not accept an alternate route without a written concession.
How does ASTM A204 / A204M Grade A (ASME SA204 Grade A) differ from near-equivalent grades?
Near-equivalents may differ in carbon or alloy bands, tensile class, impact temperature, or heat treatment. Substitution needs engineering approval and matching certificate scope.
How do I RFQ ASTM A204 / A204M Grade A (ASME SA204 Grade A) from Gangsteel?
Send ASTM A204 / A204M Grade A (ASME SA204 Grade A), thickness x width x length, quantity or tonnage, delivery condition, optional impact/UT/Z tests, EN 10204 3.1 or 3.2, destination, and any dual-mark needs. Gangsteel replies with mill options, lead time, and packing notes.
Ordering and Mill Certificates
State grade ASTM A204 / A204M Grade A (ASME SA204 Grade A), dimensions, quantity, delivery condition, optional NDT/PMI, and certificate (EN 10204 3.1 standard; 3.2 when third-party inspection is ordered). Gangsteel supplies export plate and related products with mill test certificates. Contact Gangsteel for stock and mill production RFQs.
-
BHW35 Steel Plate for Sale | RF
BHW35 for sale: technical notes, chemistry and mechanical planning tables, applications and RFQ from Gangsteel.
-
ASTM A516 Grade 70 Equivalent:
ASTM A516 Grade 70 equivalents include ASME SA516 Gr 70, EN 10028-2 P355GH and BS 1501 224-490. Gangsteel compa
-
What is the difference between
we supply high-quality A516 Gr 70 steel plate for pressure vessel applications and other standards like ASTM A2
-
P355GH AND S355J2 Steel Plates
EN10028-2 P355GH for High-Strength Low-Alloy Columbium-Vanadium Structural Steel EN10025-2 S355J2 Structural St
