Home > News >

ASTM A662 / A662M Grade B is a C-Mn-Si pressure-vessel plate grade under ASTM A662/A662M. This specification page covers grade identity, chemistry, mechanical requirements, related grades, and RFQ practice. Accept material against the ordered edition and the mill test certificate.

Grade Identity and Delivery Condition

ASTM A662 / A662M Grade B is supplied for projects that name this designation on the purchase order or calculation sheet. Standard delivery condition is Normalized when t>40 mm [1.5 in]; thinner plate as-rolled or normalized per order. Gangsteel supplies export plate and related products with EN 10204 documentation. Do not accept an alternate heat-treatment route unless a written concession changes the specification requirement.

Chemical Composition - Heat Analysis (ASTM A662 / A662M Grade B)

Heat and product analysis limits per A662/A662M Grade B.

ElementHeat analysis %Product analysis %
C, max0.190.22
Mn0.85-1.500.79-1.62
P, max0.0250.025
S, max0.0250.025
Si0.15-0.400.13-0.45

Mechanical Properties (ASTM A662 / A662M Grade B)

Confirm thickness, specimen orientation, and any supplementary impact, UT, or hardness requirements on the PO.

PropertyRequirement
Tensile strength65-85 ksi [450-585 MPa]
Yield strength, min40 ksi [275 MPa]
Elongation in 200 mm, min20%
Elongation in 50 mm, min23%
Delivery conditionNormalized when t>40 mm; thinner AR or N per PO

Related / Near-Equivalent Grades

Near-equivalents are for cross-reference only. They are not automatic code substitutes. Substitution requires engineer approval and matching certificate scope.

SystemGradeNote
ASTMA662 Grade A / CSame family; A lower / C higher tensile
ASTMA516 Grade 65/70Common PV carbon plate - not automatic substitute
ENP355NH (approx.)Confirm impact and code

Frequently Asked Questions

What is ASTM A662 / A662M Grade B?

ASTM A662 / A662M Grade B is a C-Mn-Si pressure-vessel plate under ASTM A662/A662M. It is ordered when drawings or the calculation sheet name this designation specifically.

What chemical composition applies to ASTM A662 / A662M Grade B?

Controlled elements and limits are tabulated above from the governing standard. Always verify the heat analysis on the MTC against the ordered edition.

What mechanical properties should buyers expect for ASTM A662 / A662M Grade B?

Tensile, yield, elongation, and related limits are tabulated above. Design allowables must come from the applicable pressure-vessel or structural code, not from a web summary.

What delivery condition is required for ASTM A662 / A662M Grade B?

Standard delivery is Normalized when t>40 mm [1.5 in]; thinner plate as-rolled or normalized per order. State it explicitly on the PO. Do not accept an alternate route without a written concession.

How does ASTM A662 / A662M Grade B differ from near-equivalent grades?

Near-equivalents may differ in carbon or alloy bands, tensile class, impact temperature, or heat treatment. Substitution needs engineering approval and matching certificate scope.

How do I RFQ ASTM A662 / A662M Grade B from Gangsteel?

Send ASTM A662 / A662M Grade B, thickness x width x length, quantity or tonnage, delivery condition, optional impact/UT/Z tests, EN 10204 3.1 or 3.2, destination, and any dual-mark needs. Gangsteel replies with mill options, lead time, and packing notes.

Ordering and Mill Certificates

State grade ASTM A662 / A662M Grade B, dimensions, quantity, delivery condition, optional NDT/PMI, and certificate (EN 10204 3.1 standard; 3.2 when third-party inspection is ordered). Gangsteel supplies export plate and related products with mill test certificates. Contact Gangsteel for stock and mill production RFQs.

Other Products