Home > News >

EN 10028-6 P690Q (1.8879) is a quenched-and-tempered alloy steel plate for pressure purposes grade under EN 10028-6:2017. This specification page covers grade identity, chemistry, mechanical requirements, related grades, and RFQ practice. Accept material against the ordered edition and the mill test certificate.

Grade Identity and Delivery Condition

EN 10028-6 P690Q (1.8879) is supplied for projects that name this designation on the purchase order or calculation sheet. Standard delivery condition is Quenched and tempered (+QT). Gangsteel supplies export plate and related products with EN 10204 documentation. Do not accept an alternate heat-treatment route unless a written concession changes the specification requirement.

Chemical Composition - Heat Analysis (EN 10028-6 P690Q (1.8879))

Cast/ladle analysis maxima for P690Q per EN 10028-6:2017 Table 1. Grain-refining elements apply per the standard footnotes. Product analysis tolerances per Table 2. Confirm edition on the MTC.

Element / ruleRequirement
C, max0.20
Si, max0.80
Mn, max1.70
P, max0.025
S, max0.015
N, max0.015
B, max0.005
Cr, max1.50
Mo, max0.70
Cu, max0.30
Nb, max0.06
Ni, max2.50
Ti, max0.05
V, max0.12
Zr, max0.15

Mechanical Properties (EN 10028-6 P690Q (1.8879))

Confirm thickness, specimen orientation, and any supplementary impact, UT, or hardness requirements on the PO.

PropertyRequirement
Yield ReH/Rp0.2 min (t<=50 mm)690 MPa
Tensile Rm (t<=50 mm)770-940 MPa
Yield ReH/Rp0.2 min (50 < t <=100 mm)670 MPa
Tensile Rm (50 < t <=100 mm)770-940 MPa
Yield ReH/Rp0.2 min (100 < t <=200 mm)630 MPa
Tensile Rm (100 < t <=200 mm)720-900 MPa
Elongation A, min14%
Delivery / HTQuenched and tempered (+QT); impact per Table 4 for Q quality

Related / Near-Equivalent Grades

Near-equivalents are for cross-reference only. They are not automatic code substitutes. Substitution requires engineer approval and matching certificate scope.

SystemGradeNote
EN 10028-6P690QH / QL1 / QL2Same strength ladder; elevated-temp or colder impact options
EN 10025-6S690Q family (approx.)Structural QT cousin - different product scope
ASTMA517 / A514 strength class (approx.)Not drop-in - confirm design code

Frequently Asked Questions

What is EN 10028-6 P690Q (1.8879)?

EN 10028-6 P690Q (1.8879) is a quenched-and-tempered alloy steel plate for pressure purposes under EN 10028-6:2017. It is ordered when drawings or the calculation sheet name this designation specifically.

What chemical composition applies to EN 10028-6 P690Q (1.8879)?

Controlled elements and limits are tabulated above from the governing standard. Always verify the heat analysis on the MTC against the ordered edition.

What mechanical properties should buyers expect for EN 10028-6 P690Q (1.8879)?

Tensile, yield, elongation, and related limits are tabulated above. Design allowables must come from the applicable pressure-vessel or structural code, not from a web summary.

What delivery condition is required for EN 10028-6 P690Q (1.8879)?

Standard delivery is Quenched and tempered (+QT). State it explicitly on the PO. Do not accept an alternate route without a written concession.

How does EN 10028-6 P690Q (1.8879) differ from near-equivalent grades?

Near-equivalents may differ in carbon or alloy bands, tensile class, impact temperature, or heat treatment. Substitution needs engineering approval and matching certificate scope.

How do I RFQ EN 10028-6 P690Q (1.8879) from Gangsteel?

Send EN 10028-6 P690Q (1.8879), thickness x width x length, quantity or tonnage, delivery condition, optional impact/UT/Z tests, EN 10204 3.1 or 3.2, destination, and any dual-mark needs. Gangsteel replies with mill options, lead time, and packing notes.

Ordering and Mill Certificates

State grade EN 10028-6 P690Q (1.8879), dimensions, quantity, delivery condition, optional NDT/PMI, and certificate (EN 10204 3.1 standard; 3.2 when third-party inspection is ordered). Gangsteel supplies export plate and related products with mill test certificates. Contact Gangsteel for stock and mill production RFQs.

Other Products