EN 10025-3 S460N Specifications
At Gangsteel, we’re thrilled to present the detailed EN 10025-3 S460N Specs, outlining the properties of this high-strength, low-alloy structural steel under EN 10025-3. Renowned for its fine-grain structure, exceptional strength, and weldability, S460N is a top choice for structural projects like bridges, cranes, and building frameworks in moderate climates.
As part of the en 10025 3 normalized steel plate family, EN 10025-3 S460N delivers a minimum yield strength of 460 MPa and -20°C toughness. Gangsteel explores its specifications, chemical composition, mechanical properties, and applications, comparing it to grades like en 10025 3 s420n normalized structural steel plate and en 10025 3 s355n normalized structural steel plate. For more details, visit our en 10025 3 s460n normalized structural steel plate page.
What is EN 10025-3 S460N?
EN 10025-3 S460N is a high-strength structural steel under the EN 10025-3:2019 standard, with a minimum yield strength of 460 MPa for plates up to 16 mm thick. Its designation, also known as material number 1.8901, breaks down as:
- S: Structural steel.
- 460: Minimum yield strength in MPa.
- N: Normalized or normalized rolled, tested for impact toughness at -20°C.
The normalization process refines the grain structure, enhancing EN 10025-3 S460N specs for strength, toughness, and weldability, ideal for moderate climates. Compared to en 10025 3 s355n normalized structural steel plate, S460N offers higher strength for heavier structural demands.
Chemical Composition of EN 10025-3 S460N
Gangsteel ensures EN 10025-3 S460N meets stringent chemical composition standards for optimal performance:
|
Element |
Ladle Analysis (max %) |
Product Analysis (max %) |
Role in Properties |
|---|---|---|---|
|
Carbon (C) |
0.20 |
0.22 |
Enhances strength, kept low for weldability and toughness. |
|
Silicon (Si) |
0.60 |
0.65 |
Aids deoxidation, improves strength and microstructure. |
|
Manganese (Mn) |
1.00-1.70 |
0.95-1.80 |
Boosts strength and toughness for load-bearing capacity. |
|
Phosphorus (P) |
0.030 |
0.035 |
Minimized to reduce inclusions, enhancing toughness. |
|
Sulfur (S) |
0.025 |
0.030 |
Low levels prevent inclusions, improving weld quality. |
|
Nitrogen (N) |
0.025 |
0.027 |
Controlled to avoid brittleness, supporting toughness. |
|
Aluminum (Al) |
0.020 (min, total) |
0.015 (min, total) |
Refines grains for toughness, improves microstructure. |
|
Niobium (Nb) |
0.05 |
0.06 |
Promotes fine-grain structure, enhancing strength and toughness. |
|
Vanadium (V) |
0.20 |
0.22 |
Increases strength via precipitation hardening. |
|
Titanium (Ti) |
0.05 |
0.06 |
Refines grains, supports toughness. |
|
Chromium (Cr) |
0.30 |
0.35 |
Enhances corrosion resistance and strength. |
|
Nickel (Ni) |
0.80 |
0.85 |
Improves toughness in moderate climates. |
|
Molybdenum (Mo) |
0.10 |
0.12 |
Boosts strength and creep resistance. |
|
Copper (Cu) |
0.55 |
0.60 |
Enhances corrosion resistance and strength. |
Carbon Equivalent (CEV): Capped at 0.48% for plates up to 63 mm, calculated as CEV = C + Mn/6 + (Cr + Mo + V)/5 + (Ni + Cu)/15, ensuring weldability, similar to en 10025 3 s420n normalized structural steel plate.
Mechanical Properties of EN 10025-3 S460N
Gangsteel guarantees EN 10025-3 S460N specs deliver top performance for high-strength applications:
|
Thickness (mm) |
Yield Strength (min, MPa) |
Tensile Strength (MPa) |
Elongation (min, %) |
Impact Energy (min, J @ -20°C) |
|---|---|---|---|---|
|
≤16 |
460 |
540-720 |
17 |
27 |
|
16<t≤40 |
440 |
540-720 |
17 |
27 |
|
40<t≤63 |
430 |
540-720 |
17 |
27 |
|
63<t≤80 |
410 |
540-720 |
17 |
27 |
|
80<t≤100 |
400 |
540-720 |
17 |
27 |
|
100<t≤150 |
380 |
520-680 |
17 |
27 |
|
150<t≤200 |
370 |
520-680 |
17 |
27 |
- Yield Strength: Starts at 460 MPa for thin plates, ideal for heavy loads in structures like cranes.
- Tensile Strength: 540-720 MPa ensures durability under high tensile forces.
- Elongation: ≥17% supports complex structural designs.
- Impact Toughness: ≥27 J at -20°C ensures reliability in moderate climates, outperforming en 10025 3 s355n normalized structural steel plate.
- Hardness: Typically 170-210 HB (Brinell), balancing machinability and durability.
Delivery Conditions and Specifications
Gangsteel provides EN 10025-3 S460N with specifications outlined in the standard:
- Standard: EN 10025-3:2019.
- Condition: Normalized or normalized rolled for consistent microstructure.
- Thickness Range: 6–200 mm, with custom options up to 250 mm.
- Widths: 2000, 2500, or 3000 mm.
- Lengths: Up to 12,000 mm.
- Surface: Hot-rolled, with optional priming for corrosion protection.
- Certifications: EN 10204 3.1/3.2 certificates, ultrasonic testing (UT) per EN 10160, and approvals from ABS, LR, BV, or DNV.
- Z-Quality: Optional Z15, Z25, or Z35 per EN 10164 for through-thickness properties, reducing lamellar tearing risk, similar to en 10025 3 s275n normalized structural steel plate.
- Tolerances: Per EN 10029 for precision.
Welding and Heat Treatment
EN 10025-3 S460N specs ensure excellent weldability with a low CEV (≤0.48%):
- Welding: Compatible with GMAW and SAW per EN 1011-2. Preheating (100-150°C) for plates >20 mm; post-weld heat treatment (PWHT) at 550-650°C optional.
- Consumables: ER70S-6 for GMAW, EM12K flux with EH14 wire for SAW.
- Weld Quality: Matches en 10025 3 s460n normalized structural steel plate for reliable, high-strength joints.
Applications Leveraging EN 10025-3 S460N Specs
Gangsteel supplies EN 10025-3 S460N for projects that rely on its specifications:
- Bridges: Load-bearing components like girders and beams in moderate climates, leveraging 460 MPa yield strength.
- Cranes: High-strength structural parts for heavy lifting, benefiting from 540-720 MPa tensile strength.
- Building Frameworks: Robust columns and trusses in temperate regions, supported by ≥17% elongation for complex designs.
- Heavy Machinery: Durable components like chassis in industrial equipment, relying on -20°C toughness.
For colder climates requiring -50°C toughness, consider en 10025 3 s460nl normalized structural steel plate.
Why Choose Gangsteel?
Gangsteel is your trusted source for EN 10025-3 S460N:
- Inventory: Extensive stock in China for rapid delivery.
- Sizes: Thicknesses from 6–200 mm, widths up to 3000 mm, lengths up to 12,000 mm.
- Delivery: Ships globally in 7-30 days.
- Certifications: EN 10204 3.1/3.2, UT testing (EN 10160), and ABS/LR/BV/DNV approvals.
- Processing: Cutting, welding, and bending tailored to your needs.
Contact us for en 10025 3 s460n normalized structural steel plate.
FAQ
What are the EN 10025-3 S460N specs?
EN 10025-3 S460N specs include a yield strength of ≥460 MPa, tensile strength of 540-720 MPa, ≥17% elongation, and ≥27 J impact toughness at -20°C.
How do EN 10025-3 S460N specs perform in moderate climates?
EN 10025-3 S460N specs, with ≥27 J impact toughness at -20°C, ensure reliability for bridges and cranes in temperate environments.
Is EN 10025-3 S460N weldable per its specs?
Yes, EN 10025-3 S460N specs include a CEV ≤0.48%, enabling easy welding with GMAW or SAW and preheating (100-150°C for >20 mm).
What applications use EN 10025-3 S460N specs?
EN 10025-3 S460N specs support bridges, cranes, building frameworks, and heavy machinery in moderate climates, leveraging high strength.
How do EN 10025-3 S460N specs compare to S355N?
EN 10025-3 S460N specs include higher yield strength (460 MPa vs 355 MPa) than S355N, with similar -20°C toughness, for more demanding projects.
What certifications support EN 10025-3 S460N specs?
Gangsteel provides EN 10025-3 S460N with EN 10204 3.1/3.2, UT testing (EN 10160), and ABS/LR/BV/DNV approvals for global compliance.
-
BHW35 Steel Plate for Sale | RF
BHW35 / 13MnNiMo5-4 (DIWA 353 family): identity, chemistry, mechanical properties, related grades, and RFQ note
-
ASTM A516 Grade 70 Equivalent:
ASTM A516 Grade 70 equivalents include ASME SA516 Gr 70, EN 10028-2 P355GH and BS 1501 224-490. Gangsteel compa
-
What is the difference between
we supply high-quality A516 Gr 70 steel plate for pressure vessel applications and other standards like ASTM A2
-
P355GH AND S355J2 Steel Plates
EN10028-2 P355GH for High-Strength Low-Alloy Columbium-Vanadium Structural Steel EN10025-2 S355J2 Structural St
