Hot Rolled A516 Gr 70 Plate Prices and Availability
Gangsteel, a leading manufacturer and exporter of pressure vessel and boiler steel plates, offers a robust inventory of hot-rolled ASTM A516 GR 70 plates, tailored for industries such as oil and gas, petrochemical, and power generation. Renowned for its high strength, excellent weldability, and toughness, hot-rolled ASTM A516 GR 70 is a preferred choice for pressure vessels and boilers. This article provides insights into the 2025 price range, stock availability, chemical composition, mechanical properties, and applications of hot-rolled ASTM A516 GR 70 plates, offering procurement specialists and engineers critical information for sourcing decisions.
Hot Rolled A516 Gr 70 Plate Prices in 2025
The price of hot-rolled ASTM A516 GR 70 plates in 2025 varies based on specifications, order volume, and market dynamics, particularly in China’s steel market. Below is an indicative price range based on recent data:
|
Specification |
Price Range (USD/ton) |
|---|---|
|
Hot-Rolled, 6–25 mm thickness |
570–650 |
|
Hot-Rolled, 26–50 mm thickness |
600–700 |
|
Hot-Rolled, >50 mm thickness |
650–800 |
|
Customized (cut-to-size, tested) |
750–900+ |
Notes:
- Standard Thickness (6–25 mm): Prices range from $570–650/ton due to high production efficiency and availability.
- Thicker Plates (26–50 mm): Slightly higher at $600–700/ton due to increased material and processing costs.
- Heavy Plates (>50 mm): Prices range from $650–800/ton, reflecting higher raw material and handling requirements.
- Customized Plates: Plates requiring specific dimensions or additional testing (e.g., ultrasonic, HIC) can exceed $750/ton.
These prices are based on market data from January and September 2025, primarily from China’s steel hubs (e.g., Nanjing, Rizhao). Actual prices may vary depending on global supply chain factors, regional demand, and supplier terms. Contact Gangsteel for precise 2025 pricing and availability tailored to your project needs.
Stock Availability
Gangsteel maintains a comprehensive stock of hot-rolled ASTM A516 GR 70 plates to ensure rapid delivery. The table below outlines typical stock specifications:
|
Specification |
Details |
|---|---|
|
Thickness |
6 mm–100 mm (common: 6–50 mm) |
|
Width |
1500 mm–3000 mm (common: 2000 mm, 2500 mm) |
|
Length |
6000 mm–12000 mm (customizable up to 18000 mm) |
|
Condition |
Hot-Rolled, As-Rolled or Normalized (optional) |
|
Certifications |
ASTM A516 GR 70, ASME SA516 GR 70, EN 10204 3.1/3.2 |
|
Additional Testing |
Ultrasonic Testing (UT), Charpy V-notch Impact Test |
|
Surface Finish |
Natural, Shot-blasted, Painted |
|
Stock Locations |
Nanjing, Rizhao, Shanghai (China), with global shipping |
|
Availability |
Immediate for standard sizes; custom orders within 7–30 days |
Notes:
- Standard Sizes: Plates in 6–50 mm thickness, 2000–2500 mm width, and 6000–12000 mm length are typically in stock for immediate delivery.
- Custom Orders: Thicker plates or non-standard sizes are available with short lead times.
- Global Access: Gangsteel’s stock in China supports worldwide delivery, with efficient logistics for urgent projects.
Contact Gangsteel to confirm real-time stock availability or locate distributors near you.
Chemical Composition
The chemical composition of hot-rolled ASTM A516 GR 70 ensures its suitability for pressure vessels, supporting its high demand and pricing. The table below outlines its composition per ASTM standards:
|
Element |
Composition (% by weight) |
|---|---|
|
Carbon (C) |
0.27 max |
|
Manganese (Mn) |
0.85–1.20 |
|
Phosphorus (P) |
0.035 max |
|
Sulfur (S) |
0.035 max |
|
Silicon (Si) |
0.15–0.40 |
|
Aluminum (Al) |
0.02 min (for killed steel) |
|
Iron (Fe) |
Balance |
Key Notes:
- Carbon: Capped at 0.27% for weldability, critical for pressure vessel fabrication.
- Manganese: Enhances strength and toughness, supporting high-pressure applications.
- Phosphorus and Sulfur: Low levels improve notch toughness for low-temperature service.
- Aluminum: Ensures fully killed steel, enhancing quality and consistency.
Gangsteel’s ASTM A516 GR 70 plates meet ASME SA516 GR 70 standards, with rigorous testing for compliance.
Mechanical Properties
The mechanical properties of hot-rolled ASTM A516 GR 70 justify its pricing and availability for demanding applications. The table below summarizes its properties:
|
Property |
Value |
|---|---|
|
Tensile Strength |
485–620 MPa (70–90 ksi) |
|
Yield Strength (min) |
260 MPa (38 ksi) |
|
Elongation (min, 200 mm) |
17% |
|
Elongation (min, 50 mm) |
21% |
|
Hardness (HB, typical) |
140–200 HB |
|
Impact Toughness (Charpy V-notch) |
Meets ASTM requirements at -46°C |
Highlights:
- Tensile Strength: The 485–620 MPa range ensures durability in high-pressure applications.
- Yield Strength: A minimum of 260 MPa supports structural integrity.
- Elongation: 17–21% ductility enables complex fabrication.
- Impact Toughness: Performance at -46°C suits cryogenic applications, increasing stock demand.
Compared to ASTM A516 GR 65 and ASTM A516 GR 60, hot-rolled ASTM A516 GR 70 offers superior strength.
Applications
Hot-rolled ASTM A516 GR 70 is widely used in:
- Pressure Vessels: For oil, gas, and chemical processing, requiring high strength and toughness.
- Boilers: In power generation, where thermal stability is critical.
- Cryogenic Equipment: Suitable for LNG storage due to low-temperature performance.
- Fabrication: Its weldability supports complex assemblies in industrial equipment.
Gangsteel’s ASME SA516 GR 70 plates meet ASME standards, ensuring compliance for global projects.
Why Choose Gangsteel?
Gangsteel is a trusted supplier of hot-rolled ASTM A516 GR 70 and ASME SA516 GR 70 plates, offering:
- Certified Quality: Plates undergo ultrasonic testing, Charpy impact tests, and chemical analysis to meet ASTM/ASME standards.
- Extensive Stock: Wide range of hot-rolled plates available for immediate delivery.
- Competitive Pricing: Optimized for 2025 market conditions, with transparent quotes.
- Global Supply: Efficient logistics from China to worldwide markets.
- Technical Support: Guidance on selecting ASTM A516 GR 70 versus ASTM A516 GR 65, ASTM A516 GR 60, or ASTM A516 GR 55.
Gangsteel Solution
Hot-rolled ASTM A516 GR 70 plates offer exceptional strength and weldability, with competitive pricing and immediate availability from Gangsteel’s stock. Our ASME SA516 GR 70 plates ensure reliability for pressure vessel and boiler applications. For equivalent standards, explore our ASME SA516 GR 70 Equivalent Grade guide. Contact Gangsteel for 2025 pricing and stock details.
Long-Tail Keywords
Hot rolled A516 Gr 70 price 2025, ASTM A516 GR 70 stock availability, ASME SA516 GR 70 plate suppliers, A516 GR 70 boiler plate cost
-
BHW35 Steel Plate for Sale | RF
BHW35 / 13MnNiMo5-4 (DIWA 353 family): identity, chemistry, mechanical properties, related grades, and RFQ note
-
ASTM A516 Grade 70 Equivalent:
ASTM A516 Grade 70 equivalents include ASME SA516 Gr 70, EN 10028-2 P355GH and BS 1501 224-490. Gangsteel compa
-
What is the difference between
we supply high-quality A516 Gr 70 steel plate for pressure vessel applications and other standards like ASTM A2
-
P355GH AND S355J2 Steel Plates
EN10028-2 P355GH for High-Strength Low-Alloy Columbium-Vanadium Structural Steel EN10025-2 S355J2 Structural St
