Home > News >

IS 2062 Grade B equivalent ASME material: the closest ASME material to IS 2062 E250 Grade B (E250BR) is ASME SA36, identical to ASTM A36. Both have a 250 MPa minimum yield; IS 2062 E250 B requires 410 MPa minimum tensile and 23% elongation, while SA36 requires 400–550 MPa tensile and 20% in 200 mm. IS 2062 Grade B adds a Charpy test at room temperature, which SA36 does not require.

Gangsteel, a steel plate exporter, supplies IS 2062 and ASME SA36 plates with mill certificates. Data below: IS 2062:2011 and ASME SA-36 (= ASTM A36).

Chemical composition, ladle (heat) analysis, % max

ElementIS 2062 E250 BASME SA36 plate
C0.220.25 (t ≤ 40 mm); 0.26 (40–65); 0.27 (65–100); 0.29 (>100)
Mn1.50not specified (t ≤ 20 mm); 0.80–1.20 (20–40 mm); 0.85–1.20 (>40 mm)
Si0.400.40 (t ≤ 40 mm); 0.15–0.40 (>40 mm)
P0.0450.04
S0.0450.05
CE, max0.41–
Cu (when copper steel specified), min–0.20

Sources: IS 2062:2011 Table 1; ASTM A36/A36M Table 2. IS 2062 also gives permissible product analysis variations; ASTM A36 refers to A6/A6M for product analysis tolerances.

IS 2062 permissible variation in product analysis

ElementPermissible variation over specified max, %
C0.02
Mn0.05
S0.005
P0.005
Si0.03

Source: IS 2062:2011, Table for permissible variation of product analysis from specified ladle limits.

ASTM A36 product analysis tolerances (ASTM A6/A6M)

ElementSpecified limit range, %Under minOver max
Cto 0.15 incl.0.020.03
C> 0.15 to 0.400.030.04
Mn> 0.60 to 0.900.060.08
Mn> 0.90 to 1.200.080.10
Mn> 1.20 to 1.350.090.11
Pto 0.040 incl.–0.010
Sto 0.060 incl.–0.010
Sito 0.30 incl.0.020.03
Si> 0.30 to 0.400.050.05
Cu (min specified)0.20 min0.02–

Source: ASTM A6/A6M, product analysis tolerances table. The product specification gives heat analysis; product (check) analysis may fall outside the heat limits by no more than these amounts.

Mechanical properties

PropertyIS 2062 E250 BASME SA36
Yield, min250 MPa (t < 20 mm); 240 (20–40); 230 (>40)250 MPa (36 ksi)
Tensile410 MPa min400–550 MPa (58–80 ksi)
Elongation, min23% (5.65√So)20% in 200 mm; 23% in 50 mm
Charpy V27 J at room temperature (B); 0°C for B0not required

Sources: IS 2062:2011 Table 2; ASTM A36/A36M Table 3.

Related: ASME SA36 steel plate, ASTM A36 steel plate, IS 2062 Fe 410 WB plate.

2062 Grade B Equivalent ASME SA36 Material

IS 2062 Grade B is an Indian standard structural steel grade known for its good weldability, formability, and moderate strength, commonly used in construction, bridges, and general fabrication. It is equivalent to ASME SA36, which is the ASME-adopted version of ASTM A36 for carbon structural steel, sharing similar chemical compositions and mechanical properties for interchangeable use in non-critical applications. As a steel plate exporter, our team supplies high-quality plates equivalent to IS 2062 Grade B under asme sa 283/sa 283m, offering reliable alternatives for global projects in buildings and machinery.

 

Overview of IS 2062 Grade B and ASME SA36

IS 2062 Grade B is part of the IS 2062 specification for hot-rolled medium and high tensile structural steel, with a minimum yield strength of 250 MPa for thicknesses up to 20 mm. ASME SA36 is a carbon steel specification under ASME SA36/SA36M, used for riveted, bolted, or welded structures with a yield strength of 36 ksi (250 MPa).

Both are low-carbon steels, making them equivalent in many structural contexts. our asme sa 283/sa 283m plates provide similar performance, including grades like sa 283 grade a steel plate, sa 283 grade b steel plate, sa 283 grade c steel plate, and sa 283 grade d steel plate for versatile structural needs.

The table below compares IS 2062 Grade B and ASME SA36:

 

Chemical Composition Comparison

Both have low carbon content for good weldability, with minor variations. Below is a table of typical compositions (in weight %, maximum unless specified):

 

our sa 283 grade c steel plate offers a similar low-carbon profile for equivalent performance.

 

Mechanical Properties Comparison

IS 2062 Grade B and SA36 have overlapping mechanical properties, with similar yield strengths. The table below details typical values:

 

our asme sa 283/sa 283m plates match these for structural reliability.

 

Applications and Interchangeability

Both are used in construction for beams, plates, and welded structures, with good corrosion resistance. They are often interchangeable, as IS 2062 Grade B meets SA36 specs in most cases. our plates support this with certifications.

 

More reading: asme sa 283/sa 283m

IS 2062 Grade B Equivalent ASME Material FAQ

What is the ASME equivalent of IS 2062 Grade B?

ASME SA36 is the usual equivalent. For pressure parts, SA283 Grade C or SA516 Grade 60 may be specified instead, depending on the code.

What is the ASTM equivalent of IS 2062 E250?

ASTM A36. IS 2062 E350 is closer to ASTM A572 Grade 50.

What is the difference between IS 2062 Grade A, BR, B0 and C?

They differ in impact testing: Grade A has no impact test, BR is tested at room temperature, B0 at 0°C and C at −20°C (27 J min).

Is IS 2062 Grade B the same as Fe 410 WB?

Yes. Fe 410 WB is the older IS 2062 designation that is now E250 B.

What is the yield strength of IS 2062 Grade B?

250 MPa minimum for thickness below 20 mm, 240 MPa for 20–40 mm and 230 MPa above 40 mm.

Is IS 2062 equivalent to EN S275?

Not exactly. E250 is between S235 and S275 of EN 10025-2; S275JR (275 MPa yield) is stronger.

Other Products