Home > News >

RINA Grade D620 (Registro Italiano Navale extra-high-strength shipbuilding steel) is a extra-high-strength hull / offshore structural plate grade under RINA Rules for the Classification of Ships; IACS UR W16 H620 / DH620 practice. This specification page covers grade identity, chemistry, mechanical requirements, related grades, and RFQ practice. Accept material against the ordered edition and the mill test certificate.

Grade Identity and Delivery Condition

RINA Grade D620 (Registro Italiano Navale extra-high-strength shipbuilding steel) is supplied for projects that name this designation on the purchase order or calculation sheet. Standard delivery condition is TMCP or QT per RINA-approved route; D quality impact at -20 C. Gangsteel supplies export plate and related products with EN 10204 documentation. Do not accept an alternate heat-treatment route unless a written concession changes the specification requirement.

Chemical Composition - Heat Analysis (RINA Grade D620 (Registro Italiano Navale extra-high-strength shipbuilding steel))

Typical RINA D620 ladle practice aligned to IACS H620. Exact chemistry is governed by the RINA-approved production specification - always use the MTC.

Element / ruleRequirement
C, max0.20
Si0.10-0.55
Mn, max1.70
P, max0.030
S, max0.030
Al, min0.015
Nb+V+Timicroalloy per approved route
Ni / Cr / Mo / Cu / Boptional per approved route

Mechanical Properties (RINA Grade D620 (Registro Italiano Navale extra-high-strength shipbuilding steel))

Confirm thickness, specimen orientation, and any supplementary impact, UT, or hardness requirements on the PO.

PropertyRequirement
Yield ReH, min620 MPa
Tensile Rm720-890 MPa
Elongation A, min15%
Impact KV (D quality, -20 C)per RINA thickness table (confirm MTC)

Related / Near-Equivalent Grades

Near-equivalents are for cross-reference only. They are not automatic code substitutes. Substitution requires engineer approval and matching certificate scope.

SystemGradeNote
IACSDH620 / H620Unified 620 MPa band
ABS/LR/BV/DNVDH620 familySister society grades

Frequently Asked Questions

What is RINA Grade D620 (Registro Italiano Navale extra-high-strength shipbuilding steel)?

RINA Grade D620 (Registro Italiano Navale extra-high-strength shipbuilding steel) is a extra-high-strength hull / offshore structural plate under RINA Rules for the Classification of Ships; IACS UR W16 H620 / DH620 practice. It is ordered when drawings or the calculation sheet name this designation specifically.

What chemical composition applies to RINA Grade D620 (Registro Italiano Navale extra-high-strength shipbuilding steel)?

Controlled elements and limits are tabulated above from the governing standard. Always verify the heat analysis on the MTC against the ordered edition.

What mechanical properties should buyers expect for RINA Grade D620 (Registro Italiano Navale extra-high-strength shipbuilding steel)?

Tensile, yield, elongation, and related limits are tabulated above. Design allowables must come from the applicable pressure-vessel or structural code, not from a web summary.

What delivery condition is required for RINA Grade D620 (Registro Italiano Navale extra-high-strength shipbuilding steel)?

Standard delivery is TMCP or QT per RINA-approved route; D quality impact at -20 C. State it explicitly on the PO. Do not accept an alternate route without a written concession.

How does RINA Grade D620 (Registro Italiano Navale extra-high-strength shipbuilding steel) differ from near-equivalent grades?

Near-equivalents may differ in carbon or alloy bands, tensile class, impact temperature, or heat treatment. Substitution needs engineering approval and matching certificate scope.

How do I RFQ RINA Grade D620 (Registro Italiano Navale extra-high-strength shipbuilding steel) from Gangsteel?

Send RINA Grade D620 (Registro Italiano Navale extra-high-strength shipbuilding steel), thickness x width x length, quantity or tonnage, delivery condition, optional impact/UT/Z tests, EN 10204 3.1 or 3.2, destination, and any dual-mark needs. Gangsteel replies with mill options, lead time, and packing notes.

Ordering and Mill Certificates

State grade RINA Grade D620 (Registro Italiano Navale extra-high-strength shipbuilding steel), dimensions, quantity, delivery condition, optional NDT/PMI, and certificate (EN 10204 3.1 standard; 3.2 when third-party inspection is ordered). Gangsteel supplies export plate and related products with mill test certificates. Contact Gangsteel for stock and mill production RFQs.

Other Products