Product List
Gangsteel Material Solution
Email: admin@gangsteel.com
Sales: jack@gangsteel.com
1. Application scope : this technology conditions apply to more than 200 mm thickness of SA 387 Gr22CL2 steel production and inspection.
2 size, shape, roughness, weight and allow deviation: the size of the steel plate, appearance, roughness, weight and deviation should be allowed to meet the provisions of ASME SA387 / SA387M.
3. Technical requirements
3.1 the chemical composition of the steel plate should be in accordance with table 1.
Table 1 (Wt%)
成 分 |
C |
Si |
Mn |
P |
S |
Cr |
Mo |
熔 炼 分 析 |
0.05~ 0.15 |
≤0.50 |
0.30~ 0.60 |
≤0.020 |
≤0.015 |
2.00~2.50 |
0.90~ 1.10 |
成 品 分 析 |
0.04~0.15 |
≤0.50 |
0.25~ 0.66 |
≤0.020 |
≤0.015 |
1.88~2.62 |
0.85~ 1.15 |
Note: (1) when thick plate ≥125mm, C≤0.17%
(2)except in table 1 prescribed trace elements, Ni, Cu should be 0.20% or less, 0.07% or V, should be strictly control As, Sb, Sn harmful element content.
(3) when add special element (Nb, B) except prescribed in table 1shoule get the agree of the user.
3.2 delivery status: normalized and backfiring
Is the fire: 925 ±25 ℃, allows cooling;
Tempering: 730 ±25 ℃, air cold.
3.3 the mechanical properties of the steel plate should comply with the provisions of the table 2:
Σs or σ0.2 MPa |
σb MPa |
δ % |
ψ % |
Sample |
Normal horizontal AKV J |
≥310 |
545~690 |
≥18 |
≥45 |
Board pull |
Average ≥20 Signal value≥17 |
Note: (1) according to the provisions of ASME SA20 standard to adjust the elongation that provisions of the table 2 .
(2) under normal horizontal temperature AKV for internal transverse index, as a judgement basis, but not print in quality certificate
3.4 steel plate's process performance should comply with the provisions of the table 3
Table 3
thickness of plating mm |
180°cold bend
|
Apex diameter |
t≤25 |
Good condition |
d=2.0a |
25<t≤50 |
d=2.5a |
|
50<t≤100 |
d=3.0a |
|
100<t |
d=3.5a |
EN10028-2 P355GH for High-Strength Low-Alloy Columbium-Vanadium Structural Steel EN10025-2 S355J2 Structural St
We export A240 304L Stainless Coil 2B, NO.1 No.4 surface, the thickness 0.1mm to 3mm, 3mm to 22mm, Mother mill
ASTM A516 GR 70 equivalent materials is such as ASME SA516 GR 70, EN 10028 P355GH, and BS1501 224-490 A & B, sh
The astm a516 gr 70 yield strength of 260 MPa ensures structural integrity in high-pressure applications, such