SA302GrA,SA302 Gr. A,SA302 Gr A,steel plate

ASME SA302 standard specification for pressure vessel plates, alloy steel, manganese-molybdenum and manganese-molybdenum-nickel

ASME SA302 Plates 50 mm and under in thickness are normally supplied in the as-rolled condition. Plates may be ordered normalized or stress relieved, or both. Plates over 50 mm in thickness shall be normalized. When normalizing plates 100 mm or over in thickness, the cooling rate may be accelerated by air blasting or liquid quenching to obtain mechanical properties comparable to those developed by normalizing plates in the lesser thicknesses.

Supplementary Technology:   HIC Test | NACE MR0175 | Z15 | Z25 | Z35 | S1 | S2 | S3 | S4.1 | S5 | S6 | S7 | S8 | S9 | S11 | S12 |S17

Thickness: 6MM to 300MM,

Width: 1500mm to 4050mm,

Length: 3000mm to 15000mm
 

Gangsteelis specialized in supplyingSA302steel plate inSA302GrA. For more information of SA302GrAsteel plates, please check them in following:

Carbon Equivalent: Ceq = 【C+Mn/6+(Cr+Mo+V)/5+(Ni+Cu)/15】%

Shipbuilding steel plate| Alloy steel plates| High strength plate| Carbon steel plate| Stainless steel plate

If you need more stock steel plates in pressure vessel steel plate, please click warehouse sizes.

Related Grade:  SA302 Grade B| SA302 Grade C| SA302 Grade D