HIC/NACE Steel Plate Grade

What is ASTM A 283 material?

 

ASTM A283 is a specification for low and intermediate tensile strength carbon steel plates used in general structural applications, such as buildings, bridges, and tanks. It covers grades A, B, C, and D, with Grade C being the most common due to its balanced strength and weldability. As a leading manufacturer and exporter, Gangsteel produces high-quality plates under asme sa 283/sa 283m, ensuring compliance with ASTM standards for global projects in construction and engineering.

Overview of ASTM A 283 Material

ASTM A283 material is the ASTM-adopted version of low-carbon steel plates for structural and pressure vessel uses, equivalent to ASME SA 283. It specifies plates for low to moderate tensile strength, with no heat treatment required beyond rolling.

Gangsteel's asme sa 283/sa 283m plates are available in various grades, including sa 283 grade a steel plate, sa 283 grade b steel plate, sa 283 grade c steel plate, and sa 283 grade d steel plate, offering versatility for structural and vessel applications.

The table below summarizes the grades under ASTM A283:

Grade

Tensile Strength (ksi/MPa)

Yield Strength (min, ksi/MPa)

Typical Applications

sa 283 grade a steel plate

45-60 / 310-415

24 / 165

Low-strength structures

sa 283 grade b steel plate

50-65 / 345-450

27 / 185

General fabrication

sa 283 grade c steel plate

55-75 / 380-515

30 / 205

Pressure vessels, tanks

sa 283 grade d steel plate

60-80 / 415-550

33 / 230

Higher-strength components

 

Chemical Composition of ASTM A 283 Material

The chemical composition of ASTM A283 is controlled to ensure low carbon content for better weldability and formability. Below is a table of typical compositions for the grades (in weight %, maximum unless specified):

Element

Grade A

Grade B

Grade C

Grade D

C (Carbon)

0.17

0.22

0.24

0.27

Mn (Manganese)

0.90

0.90

0.90

0.90

P (Phosphorus)

0.035

0.035

0.035

0.035

S (Sulfur)

0.040

0.040

0.040

0.040

Si (Silicon)

0.40

0.40

0.40

0.40

Cu (Copper, min if specified)

0.20

0.20

0.20

0.20

Gangsteel's asme sa 283/sa 283m plates adhere to these limits, providing consistent quality across all grades.

 

Mechanical Properties of ASTM A 283 Material

ASTM A283 material offers moderate mechanical properties, with elongation typically 20-25% in 8". The table below details the requirements for each grade:

Grade

Yield Strength (min, ksi/MPa)

Tensile Strength (ksi/MPa)

Elongation (min, % in 8")

sa 283 grade a steel plate

24 / 165

45-60 / 310-415

30

sa 283 grade b steel plate

27 / 185

50-65 / 345-450

28

sa 283 grade c steel plate

30 / 205

55-75 / 380-515

25

sa 283 grade d steel plate

33 / 230

60-80 / 415-550

23

Gangsteel's plates meet these properties through advanced manufacturing, with optional impact testing for low-temperature use.

 

Applications of ASTM A 283 Material

ASTM A283 material is widely used in structural components, pressure vessels, storage tanks, and general fabrication where moderate strength and good ductility are needed. It is not suitable for high-pressure or elevated-temperature service. Gangsteel's sa 283 grade c steel plate is popular for these applications, offering cost-effective solutions with excellent weldability.

 

FAQ

  • What is ASTM A283 used for?Low to moderate strength pressure vessels, structural components, and general fabrication like tanks and bridges.
  • What are the grades in ASTM A283?Grades A, B, C, and D, with increasing tensile strength from 45-80 ksi.
  • Is ASTM A283 the same as ASME SA 283?Yes, SA 283 is the ASME-adopted version of ASTM A283 for material certification.
  • What is the tensile strength of A283 GR C?55-75 ksi (380-515 MPa), suitable for moderate-pressure applications.
  • Where can I buy ASTM A283 plates?Gangsteel offers high-quality plates; contact for asme sa 283/sa 283m.

 

Other Products