HIC/NACE Steel Plate Grade

SA 283 gr c vs sa 285 gr c

 

SA 283 Gr C vs SA 285 Gr C

ASME SA 283 Gr C and SA 285 Gr C are both low-carbon steel plate specifications with similar mechanical properties, but they differ in intended applications and some chemical limits. SA 283 Gr C is for general structural use, while SA 285 Gr C is specifically for pressure vessels with stricter requirements for boilers and tanks.

As a leading Chinese manufacturer and exporter, Gangsteel offers high-quality sa 283 grade c steel plate under asme sa 283/sa 283m, providing cost-effective options for structural projects where pressure vessel specs are not required.

What is ASME SA 283 Gr C and SA 285 Gr C

SA 283 Gr C is a low to intermediate tensile strength carbon steel under ASME SA 283 for general structural applications, not permitted for pressure-retaining use due to less stringent controls. SA 285 Gr C is a pressure vessel steel under ASME SA 285, designed for fusion-welded boilers and vessels with similar strength but better suitability for high-pressure environments. Gangsteel's sa 283 grade c steel plate is ideal for non-pressure structural needs, complementing our range including sa 283 grade a steel plate, sa 283 grade b steel plate, and sa 283 grade d steel plate.

The table below summarizes key differences:

Property

SA 283 Gr C

SA 285 Gr C

Standard

ASME SA 283

ASME SA 285

Type

Structural carbon steel

Pressure vessel carbon steel

Yield Strength (min, ksi/MPa)

30 / 205

30 / 205

Tensile Strength (ksi/MPa)

55-75 / 380-515

55-75 / 380-515

Applications

General structures, low-pressure tanks

Boilers, pressure vessels

Heat Treatment

As-rolled

As-rolled

Interchangeability

Not for pressure-retaining

Suitable for pressure use

 

Chemical Composition Comparison

SA 283 Gr C and SA 285 Gr C have similar compositions, but SA 285 has slightly higher carbon allowance for pressure vessel suitability. Below is a table of typical compositions (in weight %, maximum unless specified):

Element

SA 283 Gr C

SA 285 Gr C

C (Carbon)

0.24

0.28

Mn (Manganese)

0.90

0.90

P (Phosphorus)

0.035

0.035

S (Sulfur)

0.040

0.035

Si (Silicon)

0.40

0.35

Cu (Copper, min if specified)

0.20

-

Gangsteel's sa 283 grade c steel plate adheres to these for optimal performance.

 

Mechanical Properties Comparison

Both grades have identical mechanical requirements, with no impact testing mandated. The table below details typical values:

Property

SA 283 Gr C / SA 285 Gr C

Yield Strength (min, ksi/MPa)

30 / 205

Tensile Strength (ksi/MPa)

55-75 / 380-515

Elongation (min, % in 8")

22

Hardness (Brinell, approx)

119-162

Gangsteel's asme sa 283/sa 283m plates provide these properties for structural reliability.

 

Applications and Interchangeability

SA 283 Gr C is for general structures and low-pressure tanks, while SA 285 Gr C is for pressure vessels and boilers with stricter chemical controls. They are not always interchangeable due to application restrictions. Gangsteel's plates support both with certifications.

 

FAQ

  • What is the main difference between SA 283 Gr C and SA 285 Gr C?SA 283 is for structures, SA 285 for pressure vessels with stricter composition.
  • Are mechanical properties the same for SA 283 Gr C and SA 285 Gr C?Yes, both have 55-75 ksi tensile and 30 ksi yield.
  • Can SA 283 Gr C be used for pressure vessels?No, it is not permitted for pressure-retaining applications.
  • What is the carbon content in SA 285 Gr C?Maximum 0.28%, higher than SA 283 Gr C's 0.24%.
  • Where can I buy SA 283 Gr C plates?Gangsteel offers high-quality plates; contact for sa 283 grade c steel plate.

 

Other Products