HIC/NACE Steel Plate Grade

What is SA 283 GR C material?

 

ASME SA 283 GR C is a low-carbon steel plate specification under ASME SA 283/SA 283M, offering moderate tensile strength of 55-75 ksi (380-515 MPa) and excellent weldability for pressure vessels and structural applications.

It is part of a family of grades designed for low to intermediate strength requirements, with good formability and ductility. As a leading Chinese manufacturer and exporter, Gangsteel produces high-quality sa 283 grade c steel plate within our asme sa 283/sa 283m range, ensuring compliance with ASME standards for global fabrication projects.

 

What is ASME SA 283 GR C Material?

SA 283 GR C is a carbon steel plate grade under ASME SA 283, suitable for welded pressure vessels, storage tanks, and general structural components where moderate strength is sufficient. It is not heat-treated, providing ease of fabrication but limited to low-pressure environments.

Gangsteel's sa 283 grade c steel plate is produced with controlled chemistry for enhanced performance, complementing other grades like sa 283 grade a steel plate, sa 283 grade b steel plate, and sa 283 grade d steel plate for versatile use in construction and engineering.

The table below compares SA 283 GR C with other grades:

Grade

Tensile Strength (ksi/MPa)

Yield Strength (min, ksi/MPa)

Typical Applications

sa 283 grade a steel plate

45-60 / 310-415

24 / 165

Low-strength structures

sa 283 grade b steel plate

50-65 / 345-450

27 / 185

General fabrication

sa 283 grade c steel plate

55-75 / 380-515

30 / 205

Pressure vessels, tanks

sa 283 grade d steel plate

60-80 / 415-550

33 / 230

Higher-strength components

 

Chemical Composition of SA 283 GR C

The chemical composition of SA 283 GR C is designed for low carbon content to ensure good weldability and reduced brittleness. Below is a table of typical composition (in weight %, maximum unless specified):

Element

Content (%)

C (Carbon)

0.24

Mn (Manganese)

0.90

P (Phosphorus)

0.035

S (Sulfur)

0.040

Si (Silicon)

0.40 (plates >1.5")

Cu (Copper, min if specified)

0.20

Gangsteel's sa 283 grade c steel plate adheres to these limits, providing consistent performance.

 

Mechanical Properties of SA 283 GR C

SA 283 GR C offers moderate mechanical properties, with no special heat treatment required. The table below details the requirements:

Property

Value

Yield Strength (min, ksi/MPa)

30 / 205

Tensile Strength (ksi/MPa)

55-75 / 380-515

Elongation (min, % in 8")

22

Gangsteel's asme sa 283/sa 283m plates meet these properties, with optional testing for specific applications.

 

Applications of SA 283 GR C Material

SA 283 GR C is used in low-pressure tanks, structural beams, and general fabrication where moderate strength and good weldability are key. It is not suited for high-pressure or elevated-temperature service. Gangsteel's sa 283 grade c steel plate is popular for these uses, offering cost-effective solutions.

FAQ

  • What is SA 283 GR C used for?Low-pressure vessels, structural components, and general fabrication like tanks and bridges.
  • What is the tensile strength of SA 283 GR C?55-75 ksi (380-515 MPa), suitable for moderate-strength applications.
  • Is SA 283 GR C heat-treated?No, it is supplied as-rolled for ease of fabrication.
  • What are the equivalent standards for SA 283 GR C?ASTM A283 Grade C, EN S235JR, and IS 2062 E250.
  • Where can I buy SA 283 GR C plates?Gangsteel offers high-quality plates; contact for sa 283 grade c steel plate.

 

Other Products