bs en 10025 2 s450j0 structural steel plates supplier


 

Gangsteel, a globally recognized leader in manufacturing and exporting structural steel plates, supplies high-quality EN 10025-2 S450J0 steel plates, tailored for construction, bridges, and heavy machinery applications in industries such as infrastructure, shipbuilding, and offshore engineering.

 

EN 10025-2 is the European standard for hot-rolled structural steels, with S450J0 offering high strength, weldability, and impact resistance. This article provides a comprehensive overview of en 10025 2 s450j0 structural steel plates, including chemical composition, mechanical properties, applications, and benefits, offering valuable insights for engineers, fabricators, and procurement specialists.

 

en 10025 2 s450j0 structural steel plates Introduction to DIN EN 10025-2 Standard

 

DIN EN 10025-2 specifies the technical delivery conditions for flat and long products of hot-rolled non-alloy structural steels. The standard covers grades like EN 10025-2 S235JR steel, EN 10025-2 S235J0, EN 10025-2 S235J2 steel, EN 10025-2 S275JR, EN 10025-2 S275J0 steel, EN 10025-2 S275J2 steel, EN 10025-2 S355JR steel, EN 10025-2 S355J2 steel, EN 10025-2 S355K2 steel, EN 10025-2 S355JR+N, EN 10025-2 S355J0, and EN 10025-2 S450J0 steel. Among these, en 10025 2 s450j0 structural steel plates stand out for their high yield strength, making them suitable for structural components under heavy loads.

 

Gangsteel produces en 10025 2 s450j0 structural steel plates in compliance with DIN EN 10025-2, ensuring traceability and quality certification for global projects. For related grades, explore EN 10025 S355J2G3 material steel plates and EN 10025 S355J2 N material, or refer to the BS EN 10025-2 material grade overview.

 

en 10025 2 s450j0 structural steel plates Chemical Composition

 

The chemical composition of en 10025 2 s450j0 structural steel plates is tightly controlled to achieve high strength while maintaining weldability and formability. The table below outlines the typical composition per DIN EN 10025-2:

Element

Composition (% by weight)

Carbon (C)

0.22 max

Manganese (Mn)

1.70 max

Phosphorus (P)

0.030 max

Sulfur (S)

0.025 max

Silicon (Si)

0.55 max

Copper (Cu)

0.55 max

Nitrogen (N)

0.012 max

Iron (Fe)

Balance

Key Notes:

  • Carbon: Limited to 0.22% to ensure good weldability and prevent brittleness, critical for structural applications.
  • Manganese: Up to 1.70% enhances strength and toughness without compromising ductility.
  • Phosphorus and Sulfur: Low levels (0.030% P, 0.025% S) improve impact resistance, especially at subzero temperatures.
  • Silicon and Copper: Contribute to atmospheric corrosion resistance, making en 10025 2 s450j0 structural steel plates suitable for outdoor structures.

Gangsteel’s en 10025 2 s450j0 structural steel plates undergo stringent chemical analysis to meet DIN EN 10025-2 requirements, with options for additional testing such as ultrasonic inspection.

en 10025 2 s450j0 structural steel plates Mechanical Properties

 

En 10025 2 s450j0 structural steel plates offer excellent mechanical properties, making them versatile for structural engineering. The table below summarizes its key properties per DIN EN 10025-2 (for plates up to 16 mm thickness):

Property

Value

Yield Strength (min)

450 MPa

Tensile Strength

550–700 MPa

Elongation (min, 200 mm)

17%

Impact Toughness (Charpy V-notch)

27 J at 0°C

Hardness (HB, typical)

180–220 HB

Highlights:

  • Yield Strength: Minimum 450 MPa ensures structural stability under heavy loads, ideal for bridges and buildings.
  • Tensile Strength: The 550–700 MPa range provides robustness for dynamic applications.
  • Elongation: 17% ductility supports forming and welding without cracking.
  • Impact Toughness: 27 J at 0°C ensures performance in moderate cold climates.

Compared to lower grades like EN 10025-2 S355J2 steel (yield 355 MPa) or EN 10025-2 S275JR (yield 275 MPa), en 10025 2 s450j0 structural steel plates offer higher strength, allowing for thinner plates and weight savings in designs.

en 10025 2 s450j0 structural steel plates Thickness Tolerance

 

Thickness tolerance for en 10025 2 s450j0 structural steel plates is governed by EN 10029, which specifies tolerances for hot-rolled plates 3 mm thick or above. For S450J0 (non-alloy structural steel with ReH ≥ 360 N/mm²), the default is Class A, unless otherwise specified. The table below summarizes EN 10029 Class A thickness tolerances:

Nominal Thickness t (mm)

Tolerance (mm) Upper/Lower

t ≤ 3

±0.3

3 < t ≤ 5

±0.4

5 < t ≤ 8

±0.5

8 < t ≤ 15

±0.6

15 < t ≤ 25

±0.8

25 < t ≤ 40

±1.0

40 < t ≤ 80

±1.2

80 < t ≤ 100

±1.4

100 < t ≤ 150

±1.8

150 < t ≤ 200

±2.2

200 < t ≤ 250

±2.6

Key Notes:

  • Class A: Standard tolerance for non-alloy steels; tighter classes (B, C, D) are available for precision applications.
  • Measurement: Tolerances apply outside ground areas; for plates with trimmed edges, tolerances are measured at least 100 mm from the edge.
  • Customization: Gangsteel offers plates with special tolerances upon request, ensuring compliance with EN 10029 for en 10025 2 s450j0 structural steel plates.

These tolerances ensure dimensional accuracy for structural applications, reducing fabrication issues.

en 10025 2 s450j0 structural steel plates Equivalent Material

 

En 10025 2 s450j0 structural steel plates have several equivalent materials in international standards, allowing for global sourcing and substitution. The table below details equivalent grades by country/standard:

Country/Standard

Equivalent Grade

Notes

USA (ASTM)

A572 Grade 65

Similar high strength and weldability

Germany (DIN)

ST52-3

Comparable yield strength (450 MPa)

Japan (JIS)

SM570

Equivalent for high-strength structural use

China (GB)

Q460C

Matches yield strength and impact toughness

France (AFNOR)

E460D

Similar properties for construction

ISO

FE460D

General high-strength structural equivalent

UK (BS)

55C

Comparable for offshore and high-load applications

Key Notes:

  • ASTM A572 Gr 65: Closest US equivalent, with yield strength of 450 MPa and similar tensile properties.
  • DIN ST52-3: Offers equivalent strength, widely used in Europe for high-load structures.
  • JIS SM570: Matches for hot-rolled high-strength steel, with good weldability.
  • GB Q460C: Chinese equivalent, suitable for cold-forming and impact testing.
  • Selection Tip: Equivalents may vary slightly in chemical limits; verify with specific project requirements.

For more on equivalents, refer to Gangsteel’s BS EN 10025-2 material grade guide.

en 10025 2 s450j0 structural steel plates Benefits

 

En 10025 2 s450j0 structural steel plates stand out in the EN 10025-2 family for their high strength, offering several benefits:

  1. High Strength-to-Weight Ratio: With a yield strength of 450 MPa, it enables lighter structures without sacrificing load-bearing capacity, reducing material costs in bridges and high-rise buildings.
  2. Superior Toughness: Tested at 0°C, en 10025 2 s450j0 structural steel plates perform reliably in moderate cold environments, outperforming EN 10025-2 S355JR steel.
  3. Excellent Weldability: Low carbon equivalent (CEV ≈ 0.47) allows welding without preheating in many cases, facilitating efficient fabrication for large structures.
  4. Atmospheric Corrosion Resistance: Additions of silicon and copper provide better resistance to weathering, making it suitable for outdoor applications like offshore platforms.
  5. Cost-Effectiveness: Offers higher strength than EN 10025-2 S355J2 steel or EN 10025-2 S275J2 steel, allowing for material savings while maintaining performance.
  6. Compliance and Certification: Meets DIN EN 10025-2 and BS EN 10025-2 material grade requirements, with Gangsteel providing CE marking and EN 10204 3.1/3.2 certificates.

en 10025 2 s450j0 structural steel plates Weldability and Fabrication

 

En 10025 2 s450j0 structural steel plates exhibit excellent weldability due to their low carbon equivalent, compatible with standard processes like SMAW, GTAW, and SAW. Key considerations:

  • Preheat: Minimal or no preheating required for plates up to 25 mm, reducing fabrication time.
  • Post-Weld Heat Treatment (PWHT): Not typically needed, but recommended for thicker plates (>40 mm) to relieve stresses.
  • Filler Materials: Use low-alloy fillers matching the strength of en 10025 2 s450j0 structural steel plates, such as E8018 or ER80S-Ni1.
  • Fabrication: High ductility (17% elongation) supports bending, rolling, and forming for complex structural components.

Gangsteel supplies en 10025 2 s450j0 structural steel plates in normalized conditions, enhancing grain refinement for improved fabrication performance.

en 10025 2 s450j0 structural steel plates Applications

 

En 10025 2 s450j0 structural steel plates are versatile and widely used in:

  • Construction: For bridges, buildings, and stadiums, where high strength and toughness are required.
  • Offshore Engineering: In platforms and wind turbines, leveraging its corrosion resistance and high yield strength.
  • Heavy Machinery: For cranes, excavators, and mining equipment, where durability under dynamic loads is critical.
  • Shipbuilding: In hulls and superstructures, benefiting from its weldability and strength.
  • Energy Sector: For pipelines and storage tanks, similar to EN 10025 S355J2G3 material steel plates but with higher strength.

Gangsteel’s en 10025 2 s450j0 structural steel plates are available in thicknesses from 6–300 mm, with options for cut-to-size and cladding for specialized applications.

Why Choose Gangsteel for en 10025 2 s450j0 structural steel plates?

 

Gangsteel is a global leader in supplying DIN EN 10025-2 S450J0 plates, offering:

  • Certified Quality: Plates undergo ultrasonic testing, Charpy impact tests at 0°C, and chemical analysis to meet EN 10025-2 standards.
  • Customization: Available in thicknesses from 6–300 mm, with options for normalization, cut-to-size, and beveling for efficient fabrication.
  • Global Supply: Competitive pricing and reliable delivery from China to worldwide markets, with stock in key ports for fast turnaround.
  • Technical Support: Expert guidance on selecting S450J0 versus other grades like EN 10025-2 S355JR+N or EN 10025-2 S275J2 steel.

Gangsteel Solution for en 10025 2 s450j0 structural steel plates

 

En 10025 2 s450j0 structural steel plates offer exceptional strength, weldability, and toughness, making them ideal for construction, offshore, and heavy machinery applications. Gangsteel’s high-quality S450J0 plates ensure reliability and compliance with EN 10025-2 standards. For equivalent standards, explore our BS EN 10025-2 material grade guide.

en 10025 2 s450j0 structural steel plates FAQ

 

What is the difference between S450J0 and S355J0?
S450J0 has a higher yield strength (450 MPa) than S355J0 (355 MPa), making it suitable for heavier loads, while both are tested at 0°C for impact toughness.

What is the equivalent of S450J0 in ASTM?
S450J0 is equivalent to ASTM A572 Grade 65, with similar high yield strength (450 MPa) and weldability.

What is the hardness of S450J0?
The typical Brinell hardness (HB) of S450J0 is 180–220 HB, depending on thickness and heat treatment.

What is S450J0 steel used for?
S450J0 is used in high-strength applications like bridges, offshore platforms, and heavy machinery due to its high yield strength and toughness.

What is the chemical composition of S450J0?
S450J0 has a maximum carbon content of 0.22%, manganese up to 1.70%, and low phosphorus/sulfur levels for enhanced toughness, as detailed in the composition table above.

What are the mechanical properties of S450J0?
S450J0 has a minimum yield strength of 450 MPa, tensile strength of 550–700 MPa, and impact toughness of 27 J at 0°C, as summarized in the properties table.

Is S450J0 a high-strength steel?
Yes, S450J0 is a high-strength low-alloy (HSLA) structural steel with a yield strength of 450 MPa, suitable for demanding structural applications.

What is the difference between S450J0 and S460J0?
S460J0 has a higher yield strength (460 MPa) than S450J0 (450 MPa), but both share similar toughness and weldability in EN 10025-2.

en 10025 2 s450j0 structural steel plates Production Specifications Table

 

Gangsteel offers a wide range of production capabilities for en 10025 2 s450j0 structural steel plates. The table below summarizes the available specifications:

Specification

Details

Thickness

6 mm–300 mm (common: 6–100 mm)

Width

1500 mm–4000 mm (common: 2000 mm, 2500 mm)

Length

6000 mm–18000 mm (customizable)

Condition

Hot-rolled, Normalized

Certifications

EN 10025-2, EN 10204 3.1/3.2, CE Marking

Additional Testing

Ultrasonic Testing (UT), Charpy V-notch Impact Test at 0°C, HIC (optional)

Surface Finish

Natural, Painted, Shot-blasted

Production Capacity

Up to 5000 tons/month

Customization

Cut-to-size, Beveling, Cladding (optional)

Key Notes:

  • Standard Sizes: Plates in 6–100 mm thickness, 2000–2500 mm width, and 6000–12000 mm length are typically in stock for immediate delivery.
  • Custom Orders: Thicker plates or non-standard sizes are available with short lead times.
  • Global Reach: Gangsteel’s production in China supports worldwide delivery, with efficient logistics for urgent projects.

 

Long-Tail Keywords

EN 10025-2 S450J0 properties, S450J0 structural steel plates, DIN EN 10025-2 S450J0 equivalent, S450J0 weldability, EN 10025-2 S450J0 applications

 

Other Products