bs en 10025-2 s275j2 structural steel plates supplier

 

Gangsteel, a globally recognized leader in manufacturing and exporting structural steel plates, supplies high-quality EN 10025-2 S275J2 steel plates, tailored for construction, bridges, and heavy machinery applications in industries such as infrastructure, shipbuilding, and offshore engineering.

 

BS EN 10025-2 is the British version of the European standard for hot-rolled structural steels, with S275J2 offering good strength, weldability, and impact resistance at -20°C. This article provides a comprehensive overview of bs en 10025-2 s275j2 structural steel plates, including chemical composition, mechanical properties, applications, and benefits, offering valuable insights for engineers, fabricators, and procurement specialists.

 

en 10025-2 s275j2 Introduction to DIN EN 10025-2 Standard

 

DIN EN 10025-2 specifies the technical delivery conditions for flat and long products of hot-rolled non-alloy structural steels. The standard covers grades like EN 10025-2 S235JR steel, EN 10025-2 S235J0, EN 10025-2 S235J2 steel, EN 10025-2 S275JR, EN 10025-2 S275J0 steel, EN 10025-2 S275J2 steel, EN 10025-2 S355JR steel, EN 10025-2 S355J2 steel, EN 10025-2 S355K2 steel, EN 10025-2 S355JR+N, EN 10025-2 S355J0, and EN 10025-2 S450J0 steel. Among these, en 10025-2 s275j2 stands out for its fine grain structure, improved machinability, and impact resistance at -20°C, making it suitable for structural components exposed to dynamic loads.

Gangsteel produces en 10025-2 s275j2 plates in compliance with DIN EN 10025-2, ensuring traceability and quality certification for global projects. For related grades, explore EN 10025 S355J2G3 material steel plates and EN 10025 S355J2 N material, or refer to the BS EN 10025-2 material grade overview.

en 10025-2 s275j2 Chemical Composition

 

The chemical composition of en 10025-2 s275j2 is tightly controlled to achieve optimal mechanical properties while maintaining weldability and formability. The table below outlines the typical composition per DIN EN 10025-2:

Element

Composition (% by weight)

Carbon (C)

0.18 max

Manganese (Mn)

1.50 max

Phosphorus (P)

0.030 max

Sulfur (S)

0.025 max

Silicon (Si)

0.55 max

Copper (Cu)

0.55 max

Nitrogen (N)

0.012 max

Iron (Fe)

Balance

Key Notes:

  • Carbon: Limited to 0.18% to ensure good weldability and prevent brittleness, critical for structural applications.
  • Manganese: Up to 1.50% enhances strength and toughness without compromising ductility.
  • Phosphorus and Sulfur: Low levels (0.030% P, 0.025% S) improve impact resistance, especially at subzero temperatures (tested at -20°C for J2).
  • Silicon and Copper: Contribute to atmospheric corrosion resistance, making en 10025-2 s275j2 suitable for outdoor structures.

Gangsteel’s en 10025-2 s275j2 plates undergo stringent chemical analysis to meet DIN EN 10025-2 requirements, with options for additional testing such as ultrasonic inspection.

en 10025-2 s275j2 Mechanical Properties

 

En 10025-2 s275j2 offers excellent mechanical properties, making it versatile for structural engineering. The table below summarizes its key properties per DIN EN 10025-2 (for plates up to 16 mm thickness):

Property

Value

Yield Strength (min)

275 MPa

Tensile Strength

410–560 MPa

Elongation (min, 200 mm)

20%

Impact Toughness (Charpy V-notch)

27 J at -20°C

Hardness (HB, typical)

130–180 HB

Highlights:

  • Yield Strength: Minimum 275 MPa ensures structural stability under moderate loads, ideal for buildings and machinery.
  • Tensile Strength: The 410–560 MPa range provides robustness for dynamic applications.
  • Elongation: 20% ductility supports forming and welding without cracking.
  • Impact Toughness: 27 J at -20°C ensures performance in cold climates, distinguishing it from EN 10025-2 S275JR (+20°C).

Compared to lower grades like EN 10025-2 S235JR (yield 235 MPa), en 10025-2 s275j2 offers higher strength, allowing for thinner plates and weight savings in designs.

en 10025-2 s275j2 Thickness Tolerance

 

Thickness tolerance for en 10025-2 s275j2 is governed by EN 10029, which specifies tolerances for hot-rolled plates 3 mm thick or above. For S275J2 (non-alloy structural steel with ReH ≥ 275 N/mm²), the default is Class A, unless otherwise specified. The table below summarizes EN 10029 Class A thickness tolerances:

Nominal Thickness t (mm)

Tolerance (mm) Upper/Lower

t ≤ 3

±0.3

3 < t ≤ 5

±0.4

5 < t ≤ 8

±0.5

8 < t ≤ 15

±0.6

15 < t ≤ 25

±0.8

25 < t ≤ 40

±1.0

40 < t ≤ 80

±1.2

80 < t ≤ 100

±1.4

100 < t ≤ 150

±1.8

150 < t ≤ 200

±2.2

200 < t ≤ 250

±2.6

Key Notes:

  • Class A: Standard tolerance for non-alloy steels; tighter classes (B, C, D) are available for precision applications.
  • Measurement: Tolerances apply outside ground areas; for plates with trimmed edges, tolerances are measured at least 100 mm from the edge.
  • Customization: Gangsteel offers plates with special tolerances upon request, ensuring compliance with EN 10029 for en 10025-2 s275j2.

These tolerances ensure dimensional accuracy for structural applications, reducing fabrication issues.

en 10025-2 s275j2 Equivalent Material

 

En 10025-2 s275j2 has several equivalent materials in international standards, allowing for global sourcing and substitution. The table below details equivalent grades by country/standard:

Country/Standard

Equivalent Grade

Notes

USA (ASTM)

A572 Grade 42

Similar strength and weldability

Germany (DIN)

ST44-3N

Comparable toughness at -20°C

Japan (JIS)

SM400C

Equivalent for structural use

China (GB)

Q275D

Matches yield strength and impact

France (AFNOR)

E28-3

Similar properties for construction

ISO

FE430D

General structural equivalent

UK (BS)

43D

Comparable for offshore applications

Key Notes:

  • ASTM A572 Gr 42: Closest US equivalent, with yield strength of 290 MPa (slightly higher than 275 MPa), but similar tensile properties.
  • DIN ST44-3N: Offers equivalent low-temperature toughness, widely used in Europe.
  • JIS SM400C: Matches for hot-rolled structural steel, with good weldability.
  • GB Q275D: Chinese equivalent, suitable for cold-forming and impact testing at -20°C.
  • Selection Tip: Equivalents may vary slightly in chemical limits; verify with specific project requirements.

For more on equivalents, refer to Gangsteel’s BS EN 10025-2 material grade guide.

en 10025-2 s275j2 Benefits

 

En 10025-2 s275j2 stands out in the EN 10025-2 family for its balanced properties, offering several benefits:

  1. High Strength-to-Weight Ratio: With a yield strength of 275 MPa, it enables lighter structures without sacrificing load-bearing capacity, reducing material costs in buildings and machinery.
  2. Superior Low-Temperature Toughness: Tested at -20°C, en 10025-2 s275j2 performs reliably in cold environments, outperforming EN 10025-2 S275JR (+20°C).
  3. Excellent Weldability: Low carbon equivalent (CEV ≈ 0.40) allows welding without preheating in many cases, facilitating efficient fabrication for large structures.
  4. Atmospheric Corrosion Resistance: Additions of silicon and copper provide better resistance to weathering, making it suitable for outdoor applications like bridges.
  5. Cost-Effectiveness: Offers higher strength than EN 10025-2 S235J2 steel, allowing for material savings while maintaining performance.
  6. Compliance and Certification: Meets DIN EN 10025-2 and BS EN 10025-2 material grade requirements, with Gangsteel providing CE marking and EN 10204 3.1/3.2 certificates.

en 10025-2 s275j2 Weldability and Fabrication

 

En 10025-2 s275j2 exhibits excellent weldability due to its low carbon equivalent, compatible with standard processes like SMAW, GTAW, and SAW. Key considerations:

  • Preheat: Minimal or no preheating required for plates up to 25 mm, reducing fabrication time.
  • Post-Weld Heat Treatment (PWHT): Not typically needed, but recommended for thicker plates (>40 mm) to relieve stresses.
  • Filler Materials: Use low-alloy fillers matching the strength of en 10025-2 s275j2, such as E6013 or ER70S-6.
  • Fabrication: High ductility (20% elongation) supports bending, rolling, and forming for complex structural components.

Gangsteel supplies en 10025-2 s275j2 in normalized conditions, enhancing grain refinement for improved fabrication performance.

en 10025-2 s275j2 Applications

 

En 10025-2 s275j2 is versatile and widely used in:

  • Construction: For bridges, buildings, and stadiums, where moderate strength and low-temperature toughness are required.
  • Offshore Engineering: In platforms and wind turbines, leveraging its corrosion resistance and impact toughness.
  • Heavy Machinery: For cranes, excavators, and mining equipment, where durability under dynamic loads is critical.
  • Shipbuilding: In hulls and superstructures, benefiting from its weldability and strength.
  • Energy Sector: For pipelines and storage tanks, similar to EN 10025 S355J2G3 material steel plates but with moderate strength.

Gangsteel’s en 10025-2 s275j2 plates are available in thicknesses from 6–300 mm, with options for cut-to-size and cladding for specialized applications.

en 10025-2 s275j2 Why Choose Gangsteel?

 

Gangsteel is a global leader in supplying DIN EN 10025-2 S275J2 plates, offering:

  • Certified Quality: Plates undergo ultrasonic testing, Charpy impact tests at -20°C, and chemical analysis to meet EN 10025-2 standards.
  • Customization: Available in thicknesses from 6–300 mm, with options for normalization, cut-to-size, and beveling for efficient fabrication.
  • Global Supply: Competitive pricing and reliable delivery from China to worldwide markets, with stock in key ports for fast turnaround.
  • Technical Support: Expert guidance on selecting S275J2 versus other grades like EN 10025-2 S355JR+N or EN 10025-2 S235J2 steel.

en 10025-2 s275j2 Gangsteel Solution

 

En 10025-2 s275j2 offers exceptional strength, weldability, and low-temperature toughness, making it ideal for construction, offshore, and heavy machinery applications. Gangsteel’s high-quality S275J2 plates ensure reliability and compliance with EN 10025-2 standards. For equivalent standards, explore our BS EN 10025-2 material grade guide.

en 10025-2 s275j2 FAQ

 

What is the difference between S275J2 and S275JR?
S275J2 is tested for impact toughness at -20°C, while S275JR is tested at +20°C, making S275J2 better for colder environments.

What is the equivalent of S275J2 in ASTM?
S275J2 is equivalent to ASTM A572 Grade 42, with similar strength and weldability.

What is the hardness of S275J2?
The typical Brinell hardness (HB) of S275J2 is 130–180 HB, depending on thickness and heat treatment.

What is S275J2 steel used for?
S275J2 is used in construction, bridges, offshore platforms, and heavy machinery due to its moderate strength and toughness at -20°C.

What is the chemical composition of S275J2?
S275J2 has a maximum carbon content of 0.18%, manganese up to 1.50%, and low phosphorus/sulfur levels for enhanced toughness, as detailed in the composition table above.

What are the mechanical properties of S275J2?
S275J2 has a minimum yield strength of 275 MPa, tensile strength of 410–560 MPa, and impact toughness of 27 J at -20°C, as summarized in the properties table.

Is S275J2 a mild steel?
S275J2 is a high-strength low-alloy (HSLA) structural steel with a yield strength of 275 MPa, higher than typical mild steel grades like S235 (235 MPa).

What is the difference between S275J2 and S355J2?
S355J2 has a higher yield strength (355 MPa) than S275J2 (275 MPa), making it suitable for heavier loads, while both share similar toughness at -20°C.

en 10025-2 s275j2 Production Specifications Table

 

Gangsteel offers a wide range of production capabilities for en 10025-2 s275j2. The table below summarizes the available specifications:

Specification

Details

Thickness

6 mm–300 mm (common: 6–100 mm)

Width

1500 mm–4000 mm (common: 2000 mm, 2500 mm)

Length

6000 mm–18000 mm (customizable)

Condition

Hot-rolled, Normalized

Certifications

EN 10025-2, EN 10204 3.1/3.2, CE Marking

Additional Testing

Ultrasonic Testing (UT), Charpy V-notch Impact Test at -20°C, HIC (optional)

Surface Finish

Natural, Painted, Shot-blasted

Production Capacity

Up to 5000 tons/month

Customization

Cut-to-size, Beveling, Cladding (optional)

Key Notes:

  • Standard Sizes: Plates in 6–100 mm thickness, 2000–2500 mm width, and 6000–12000 mm length are typically in stock for immediate delivery.
  • Custom Orders: Thicker plates or non-standard sizes are available with short lead times.
  • Global Reach: Gangsteel’s production in China supports worldwide delivery, with efficient logistics for urgent projects.
  •  

Long-Tail Keywords

 

EN 10025-2 S275J2 properties, S275J2 structural steel plates, DIN EN 10025-2 S275J2 equivalent, S275J2 weldability, EN 10025-2 S275J2 applications

 

Other Products