430 stainless steel sheet custom thickness

430 Stainless Steel Sheet Custom Thickness

Gangsteel produces 430 stainless steel sheet in any custom thickness you require, fully compliant with the leading international standards. We can manufacture to any of the following major specifications to meet your exact project requirements:

• JIS G4305 SUS430(Japan)
• ASTM A240 Type 430(USA)
• EN 10088-2 1.4016 / X6Cr17(Europe)
• DIN EN 1.4016(Germany)
• GB/T 3280 10Cr17 / 1Cr17(China)
• BS 1449 430S17(United Kingdom)
• ISO 4954 X6Cr17(International)

Whether you need a non-standard thickness like 0.35 mm, 1.8 mm, 2.5 mm, or any other precise gauge, Gangsteel delivers consistent quality, full traceability, and competitive pricing from our advanced Chinese production facilities.

What Is 430 Stainless Steel Sheet with Custom Thickness?

430 stainless steel sheet with custom thickness is a nickel-free ferritic grade (16–18% Cr) tailored exactly to your specification. After hot rolling, the material undergoes precision cold rolling, annealing, and pickling to achieve your required gauge with tight tolerances (±0.03 mm or better). This custom thickness capability means you get the exact material thickness needed for your stamping dies, bending radii, or weight-critical designs — without paying for excess material or extra processing.

As a straight-chromium alloy, it offers reliable atmospheric corrosion resistance, outstanding thermal conductivity (approximately 26 W/m·K), low thermal expansion, and full magnetic properties. Custom thickness 430 sheet is the smart choice when standard gauges don’t fit your production or performance needs.

Chemical Composition

Our custom thickness sheets strictly conform to the chemical limits of all listed standards:

Mechanical Properties

Typical mechanical properties in the annealed condition (standard for custom thickness sheets):

Available Custom Thickness and Finishes

Gangsteel offers true flexibility for 430 stainless steel sheet custom thickness:

• Thickness: Any gauge from 0.25 mm to 6.0 mm (in 0.01 mm increments)
• Width: 600 mm – 2000 mm (slit or mill edge)
• Length: Up to 6000 mm for cut sheets
• Tolerance: Thickness ±0.03 mm (or tighter on request), width ±0.5 mm, flatness ≤8 mm/m

Common finishes include 2B, BA, NO.4, and HL. All sheets are protected with PVC/PE film to prevent scratching during transit.

For the same high-quality material in coil form or standard sizes, we recommend our a240 Type_430 stainless steel sheet, EN10088 2 X6Cr17 stainless steel sheet, DIN 1.4016 stainless steel sheet, GB/T 10Cr17 1Cr17 stainless steel sheet, or JIS G4305 SUS 430 stainless steel sheet.

Manufacturing Process at Gangsteel for Custom Thickness

We start with high-purity AOD-refined material to achieve exact chemistry. Hot rolling is followed by cold rolling on precision mills to reach your specified thickness. Annealing and pickling remove scale, followed by final skin-passing or polishing depending on the required finish. Our advanced leveling and cut-to-length lines ensure perfect flatness and edge quality for any custom thickness. Every batch undergoes rigorous inspection including eddy-current testing and AI visual systems. Third-party certification (SGS, TUV, BV) is available for all standards.

Key Advantages of Gangsteel Custom Thickness 430 Sheet

• Exact thickness you need — no waste, no extra processing
• Same fast delivery (15–30 days) as standard sizes
• Cost-effective — eliminate trimming losses from standard coils
• Consistent quality across every custom batch
• Full traceability and third-party certification on every order

Wide Range of Applications

Custom thickness 430 stainless steel sheet is ideal when standard gauges don’t fit:

• Appliance manufacturers needing precise gauges for stamping lines
• Automotive suppliers requiring special thicknesses for trim or brackets
• Architectural fabricators wanting exact sheet weights
• Food equipment makers needing specific material thickness for hygiene standards
• Any project where material waste must be minimized

For Chinese-standard projects, we also supply the identical material under GB/T 10Cr17 1Cr17 stainless steel sheet.

Why Choose Gangsteel for Custom Thickness?

With decades of experience and state-of-the-art leveling and slitting lines, Gangsteel turns your custom thickness requirement into reality without compromising quality or lead time. We maintain large inventory of mother coils so even unusual thicknesses ship quickly. Flexible MOQ starts at just 5 tons, and every order comes with complete mill test reports and any third-party inspection you need.

Whether your project requires JIS G4305 SUS430 custom thickness, ASTM A240 430 custom thickness, EN 1.4016 custom thickness, or GB/T 3280 10Cr17 custom thickness, Gangsteel delivers exactly what you need at competitive prices.

Contact our technical sales team today for current pricing, samples, or a custom thickness quotation. Let Gangsteel be your reliable partner for 430 stainless steel sheet custom thickness.